linux-kernel - Re: [PATCH v3 1/2] dt-bindings: mmc: Document Aspeed SD controller

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <CAL_Jsq+oZRREV=VjYUxT3WphOa5tBaF1pvS_JKSphBY=3XB5MA@mail.gmail.com>
Date:   Thu, 1 Aug 2019 16:59:04 -0600
From:   Rob Herring <robh+dt@...nel.org>
To:     Andrew Jeffery <andrew@...id.au>
Cc:     linux-mmc <linux-mmc@...r.kernel.org>,
        Ulf Hansson <ulf.hansson@...aro.org>,
        Mark Rutland <mark.rutland@....com>,
        Joel Stanley <joel@....id.au>,
        Adrian Hunter <adrian.hunter@...el.com>,
        devicetree@...r.kernel.org,
        "moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE" 
        <linux-arm-kernel@...ts.infradead.org>,
        linux-aspeed@...ts.ozlabs.org,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
        Ryan Chen <ryanchen.aspeed@...il.com>
Subject: Re: [PATCH v3 1/2] dt-bindings: mmc: Document Aspeed SD controller

On Tue, Jul 30, 2019 at 12:23 AM Andrew Jeffery <andrew@...id.au> wrote:
>
> The ASPEED SD/SDIO/eMMC controller exposes two slots implementing the
> SDIO Host Specification v2.00, with 1 or 4 bit data buses, or an 8 bit
> data bus if only a single slot is enabled.
>
> Signed-off-by: Andrew Jeffery <andrew@...id.au>
>
> ---
> v3:
> * Fix compatible enums
> * Add AST2600 compatibles
> * Describe #address-cells / #size-cells
> ---
>  .../devicetree/bindings/mmc/aspeed,sdhci.yaml | 100 ++++++++++++++++++
>  1 file changed, 100 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml
>
> diff --git a/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml b/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml
> new file mode 100644
> index 000000000000..dd2a00c59641
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml
> @@ -0,0 +1,100 @@
> +# SPDX-License-Identifier: GPL-2.0-or-later
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mmc/aspeed,sdhci.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: ASPEED SD/SDIO/eMMC Controller
> +
> +maintainers:
> +  - Andrew Jeffery <andrew@...id.au>
> +  - Ryan Chen <ryanchen.aspeed@...il.com>
> +
> +description: |+
> +  The ASPEED SD/SDIO/eMMC controller exposes two slots implementing the SDIO
> +  Host Specification v2.00, with 1 or 4 bit data buses, or an 8 bit data bus if
> +  only a single slot is enabled.
> +
> +  The two slots are supported by a common configuration area. As the SDHCIs for
> +  the slots are dependent on the common configuration area, they are described
> +  as child nodes.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - aspeed,ast2400-sd-controller
> +      - aspeed,ast2500-sd-controller
> +      - aspeed,ast2600-sd-controller
> +  reg:
> +    maxItems: 1
> +    description: Common configuration registers
> +  "#address-cells":
> +    const: 1
> +  "#size-cells":
> +    const: 1
> +  ranges: true
> +  clocks:
> +    maxItems: 1
> +    description: The SD/SDIO controller clock gate
> +
> +patternProperties:
> +  "^sdhci@[0-9a-f]+$":

This should probably have:

allOf:
  - $ref: mmc-controller.yaml

Another new thing in 5.3. :)

> +    type: object
> +    properties:
> +      compatible:
> +        enum:
> +          - aspeed,ast2400-sdhci
> +          - aspeed,ast2500-sdhci
> +          - aspeed,ast2600-sdhci
> +      reg:
> +        maxItems: 1
> +        description: The SDHCI registers
> +      clocks:
> +        maxItems: 1
> +        description: The SD bus clock
> +      interrupts:
> +        maxItems: 1
> +        description: The SD interrupt shared between both slots
> +    required:
> +      - compatible
> +      - reg
> +      - clocks
> +      - interrupts
> +
> +additionalProperties: false
> +
> +required:
> +  - compatible
> +  - reg
> +  - "#address-cells"
> +  - "#size-cells"
> +  - ranges
> +  - clocks
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/aspeed-clock.h>
> +    sdc@...40000 {
> +            compatible = "aspeed,ast2500-sd-controller";
> +            reg = <0x1e740000 0x100>;
> +            #address-cells = <1>;
> +            #size-cells = <1>;
> +            ranges = <0 0x1e740000 0x10000>;
> +            clocks = <&syscon ASPEED_CLK_GATE_SDCLK>;
> +
> +            sdhci0: sdhci@100 {
> +                    compatible = "aspeed,ast2500-sdhci";
> +                    reg = <0x100 0x100>;
> +                    interrupts = <26>;
> +                    sdhci,auto-cmd12;

Not documented. Maybe should be common, but there's only a few users.

> +                    clocks = <&syscon ASPEED_CLK_SDIO>;
> +            };
> +
> +            sdhci1: sdhci@200 {
> +                    compatible = "aspeed,ast2500-sdhci";
> +                    reg = <0x200 0x100>;
> +                    interrupts = <26>;
> +                    sdhci,auto-cmd12;
> +                    clocks = <&syscon ASPEED_CLK_SDIO>;
> +            };
> +    };
> --
> 2.20.1
>