linux-kernel - Re: [PATCH v3 08/21] ARM: dts: imx7-colibri: Add touch controllers

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <4875e91c34f7206d960ccdf7b499408b6f48364b.camel@toradex.com>
Date:   Fri, 9 Aug 2019 14:56:14 +0000
From:   Marcel Ziswiler <marcel.ziswiler@...adex.com>
To:     Max Krummenacher <max.krummenacher@...adex.com>,
        "stefan@...er.ch" <stefan@...er.ch>,
        Philippe Schenker <philippe.schenker@...adex.com>,
        "mark.rutland@....com" <mark.rutland@....com>,
        "devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
        "michal.vokac@...ft.com" <michal.vokac@...ft.com>,
        "shawnguo@...nel.org" <shawnguo@...nel.org>,
        "festevam@...il.com" <festevam@...il.com>,
        "robh+dt@...nel.org" <robh+dt@...nel.org>
CC:     "linux-arm-kernel@...ts.infradead.org" 
        <linux-arm-kernel@...ts.infradead.org>,
        "s.hauer@...gutronix.de" <s.hauer@...gutronix.de>,
        "kernel@...gutronix.de" <kernel@...gutronix.de>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
        "linux-imx@....com" <linux-imx@....com>
Subject: Re: [PATCH v3 08/21] ARM: dts: imx7-colibri: Add touch controllers

On Wed, 2019-08-07 at 08:26 +0000, Philippe Schenker wrote:
> Add touch controller that is connected over an I2C bus.
> 
> Signed-off-by: Philippe Schenker <philippe.schenker@...adex.com>

Acked-by: Marcel Ziswiler <marcel.ziswiler@...adex.com>

> ---
> 
> Changes in v3:
> - Fix commit message
> 
> Changes in v2:
> - Deleted touchrevolution downstream stuff
> - Use generic node name
> - Better comment
> 
>  arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi | 24
> +++++++++++++++++++++
>  1 file changed, 24 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi
> b/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi
> index d4dbc4fc1adf..576dec9ff81c 100644
> --- a/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi
> +++ b/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi
> @@ -145,6 +145,21 @@
>  &i2c4 {
>  	status = "okay";
>  
> +	/*
> +	 * Touchscreen is using SODIMM 28/30, also used for PWM<B>,
> PWM<C>,
> +	 * aka pwm2, pwm3. so if you enable touchscreen, disable the
> pwms
> +	 */
> +	touchscreen@4a {
> +		compatible = "atmel,maxtouch";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_gpiotouch>;
> +		reg = <0x4a>;
> +		interrupt-parent = <&gpio1>;
> +		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;		/*
> SODIMM 28 */
> +		reset-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;	/*
> SODIMM 30 */
> +		status = "disabled";
> +	};
> +
>  	/* M41T0M6 real time clock on carrier board */
>  	rtc: m41t0m6@68 {
>  		compatible = "st,m41t0";
> @@ -200,3 +215,12 @@
>  	vmmc-supply = <&reg_3v3>;
>  	status = "okay";
>  };
> +
> +&iomuxc {
> +	pinctrl_gpiotouch: touchgpios {
> +		fsl,pins = <
> +			MX7D_PAD_GPIO1_IO09__GPIO1_IO9		0x74
> +			MX7D_PAD_GPIO1_IO10__GPIO1_IO10		0x14
> +		>;
> +	};
> +};