[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <061b910d01704f736654d8521be431c8aeb946e4.camel@toradex.com>
Date: Fri, 9 Aug 2019 14:59:55 +0000
From: Marcel Ziswiler <marcel.ziswiler@...adex.com>
To: Max Krummenacher <max.krummenacher@...adex.com>,
"stefan@...er.ch" <stefan@...er.ch>,
Philippe Schenker <philippe.schenker@...adex.com>,
"mark.rutland@....com" <mark.rutland@....com>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"michal.vokac@...ft.com" <michal.vokac@...ft.com>,
"shawnguo@...nel.org" <shawnguo@...nel.org>,
"festevam@...il.com" <festevam@...il.com>,
"robh+dt@...nel.org" <robh+dt@...nel.org>
CC: "linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
"s.hauer@...gutronix.de" <s.hauer@...gutronix.de>,
"kernel@...gutronix.de" <kernel@...gutronix.de>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"linux-imx@....com" <linux-imx@....com>
Subject: Re: [PATCH v3 09/21] ARM: dts: imx6qdl-colibri: add phy to fec
On Wed, 2019-08-07 at 08:26 +0000, Philippe Schenker wrote:
> Add the phy-node and mdio bus to the fec-node, represented as is on
> hardware.
> This commit includes micrel,led-mode that is set to the default
> value, prepared for someone who wants to change this.
>
> Signed-off-by: Philippe Schenker <philippe.schenker@...adex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@...adex.com>
> ---
>
> Changes in v3: None
> Changes in v2: None
>
> arch/arm/boot/dts/imx6qdl-colibri.dtsi | 11 +++++++++++
> 1 file changed, 11 insertions(+)
>
> diff --git a/arch/arm/boot/dts/imx6qdl-colibri.dtsi
> b/arch/arm/boot/dts/imx6qdl-colibri.dtsi
> index 1beac22266ed..019dda6b88ad 100644
> --- a/arch/arm/boot/dts/imx6qdl-colibri.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-colibri.dtsi
> @@ -140,7 +140,18 @@
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_enet>;
> phy-mode = "rmii";
> + phy-handle = <ðphy>;
> status = "okay";
> +
> + mdio {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + ethphy: ethernet-phy@0 {
> + reg = <0>;
> + micrel,led-mode = <0>;
> + };
> + };
> };
>
> &hdmi {
Powered by blists - more mailing lists