[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <8e910a22de1ac80f60209c2a4b2031f41c3412b2.camel@toradex.com>
Date: Fri, 9 Aug 2019 15:56:32 +0000
From: Marcel Ziswiler <marcel.ziswiler@...adex.com>
To: Max Krummenacher <max.krummenacher@...adex.com>,
"stefan@...er.ch" <stefan@...er.ch>,
Philippe Schenker <philippe.schenker@...adex.com>,
"mark.rutland@....com" <mark.rutland@....com>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"michal.vokac@...ft.com" <michal.vokac@...ft.com>,
"shawnguo@...nel.org" <shawnguo@...nel.org>,
"festevam@...il.com" <festevam@...il.com>,
"robh+dt@...nel.org" <robh+dt@...nel.org>
CC: "linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
"s.hauer@...gutronix.de" <s.hauer@...gutronix.de>,
"kernel@...gutronix.de" <kernel@...gutronix.de>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"linux-imx@....com" <linux-imx@....com>
Subject: Re: [PATCH v3 21/21] ARM: dts: imx7-colibri: Add UHS support to eval
board
Hi Philippe
On Wed, 2019-08-07 at 08:26 +0000, Philippe Schenker wrote:
> This commit adds UHS capability to Toradex Eval Boards
How about any other carrier board?
> Signed-off-by: Philippe Schenker <philippe.schenker@...adex.com>
>
> ---
>
> Changes in v3:
> - New patch to make use of ARM: dts: imx7-colibri: fix 1.8V/UHS
> support
>
> Changes in v2: None
>
> arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi | 11 +++++++++--
> 1 file changed, 9 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi
> b/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi
> index 576dec9ff81c..90121fbe561f 100644
> --- a/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi
> +++ b/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi
> @@ -210,9 +210,16 @@
> };
>
> &usdhc1 {
> - keep-power-in-suspend;
> - wakeup-source;
> + pinctrl-names = "default", "state_100mhz", "state_200mhz";
> + pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_cd_usdhc1>;
> + pinctrl-1 = <&pinctrl_usdhc1_100mhz &pinctrl_cd_usdhc1>;
> + pinctrl-2 = <&pinctrl_usdhc1_200mhz &pinctrl_cd_usdhc1>;
> vmmc-supply = <®_3v3>;
> + vqmmc-supply = <®_LDO2>;
> + cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
> + disable-wp;
> + enable-sdio-wakeup;
> + keep-power-in-suspend;
> status = "okay";
> };
>
> --
> 2.22.0
Cheers
Marcel
Powered by blists - more mailing lists