[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20190810215817.5118-1-git@andred.net>
Date: Sat, 10 Aug 2019 22:58:17 +0100
From: André Draszik <git@...red.net>
To: Philippe Schenker <philippe.schenker@...adex.com>
Cc: André Draszik <git@...red.net>,
Max Krummenacher <max.krummenacher@...adex.com>,
Oleksandr Suvorov <oleksandr.suvorov@...adex.com>,
Marcel Ziswiler <marcel.ziswiler@...adex.com>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Shawn Guo <shawnguo@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
Fabio Estevam <festevam@...il.com>,
NXP Linux Team <linux-imx@....com>,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH] ARM: dts: imx7d: sbc-iot-imx7: add recovery for i2c3/4
On Wed, 07 Aug 2019 08:26:15 +0000, Philippe Schenker wrote:
> From: Oleksandr Suvorov <oleksandr.suvorov@...adex.com>
>
> - add recovery mode for applicable i2c buses for
> Colibri iMX7 module.
>
> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@...adex.com>
> Signed-off-by: Philippe Schenker <philippe.schenker@...adex.com>
> ---
>
> Changes in v3: None
> Changes in v2: None
>
> arch/arm/boot/dts/imx7-colibri.dtsi | 25 +++++++++++++++++++++++--
> 1 file changed, 23 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/boot/dts/imx7-colibri.dtsi b/arch/arm/boot/dts/imx7-colibri.dtsi
> index a8d992f3e897..2480623c92ff 100644
> --- a/arch/arm/boot/dts/imx7-colibri.dtsi
> +++ b/arch/arm/boot/dts/imx7-colibri.dtsi
> @@ -140,8 +140,12 @@
>
> &i2c1 {
> clock-frequency = <100000>;
> - pinctrl-names = "default";
> + pinctrl-names = "default", "gpio";
> pinctrl-0 = <&pinctrl_i2c1 &pinctrl_i2c1_int>;
> + pinctrl-1 = <&pinctrl_i2c1_recovery &pinctrl_i2c1_int>;
> + scl-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
scl-gpios should be (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN) since
commit d2d0ad2aec4a ("i2c: imx: use open drain for recovery GPIO")
Otherwise you'll get a boot-time warning:
enforced open drain please flag it properly in DT/ACPI DSDT/board file
> + sda-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
> +
> status = "okay";
>
> codec: sgtl5000@a {
> @@ -242,8 +246,11 @@
>
> &i2c4 {
> clock-frequency = <100000>;
> - pinctrl-names = "default";
> + pinctrl-names = "default", "gpio";
> pinctrl-0 = <&pinctrl_i2c4>;
> + pinctrl-1 = <&pinctrl_i2c4_recovery>;
> + scl-gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>;
and here, too.
Cheers,
André
Powered by blists - more mailing lists