[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20190815120315.GL5011@pendragon.ideasonboard.com>
Date: Thu, 15 Aug 2019 15:03:15 +0300
From: Laurent Pinchart <laurent.pinchart@...asonboard.com>
To: Fabrizio Castro <fabrizio.castro@...renesas.com>
Cc: Maarten Lankhorst <maarten.lankhorst@...ux.intel.com>,
Maxime Ripard <maxime.ripard@...tlin.com>,
Sean Paul <sean@...rly.run>,
Thierry Reding <thierry.reding@...il.com>,
David Airlie <airlied@...ux.ie>,
Daniel Vetter <daniel@...ll.ch>,
Sam Ravnborg <sam@...nborg.org>,
dri-devel@...ts.freedesktop.org, linux-kernel@...r.kernel.org,
Simon Horman <horms@...ge.net.au>,
Geert Uytterhoeven <geert+renesas@...der.be>,
Chris Paterson <Chris.Paterson2@...esas.com>,
Biju Das <biju.das@...renesas.com>,
linux-renesas-soc@...r.kernel.org,
Kieran Bingham <kieran.bingham+renesas@...asonboard.com>,
Jacopo Mondi <jacopo+renesas@...ndi.org>
Subject: Re: [PATCH v2 5/9] drm/panel: Add timings field to drm_panel
Hi Fabrizio,
Thank you for the patch.
On Thu, Aug 15, 2019 at 12:04:29PM +0100, Fabrizio Castro wrote:
> We need to know if the panel supports dual-link, similarly
> to bridges, therefore add a reference to drm_timings in
> drm_panel.
Panels may also need to report setup/hold time, so it's not about
dual-link only. I would make this explicit in the commit message.
> Signed-off-by: Fabrizio Castro <fabrizio.castro@...renesas.com>
>
> ---
> v1->v2:
> * new patch
>
> include/drm/drm_panel.h | 3 +++
> 1 file changed, 3 insertions(+)
>
> diff --git a/include/drm/drm_panel.h b/include/drm/drm_panel.h
> index 8c738c0..cd6ff07 100644
> --- a/include/drm/drm_panel.h
> +++ b/include/drm/drm_panel.h
> @@ -26,6 +26,7 @@
>
> #include <linux/errno.h>
> #include <linux/list.h>
> +#include <drm/drm_timings.h>
You can just add a forward-declaration of struct drm_timing.
>
> struct device_node;
> struct drm_connector;
> @@ -81,6 +82,7 @@ struct drm_panel_funcs {
> * struct drm_panel - DRM panel object
> * @drm: DRM device owning the panel
> * @connector: DRM connector that the panel is attached to
> + * @timings: timing information
> * @dev: parent device of the panel
> * @link: link from panel device (supplier) to DRM device (consumer)
> * @funcs: operations that can be performed on the panel
> @@ -89,6 +91,7 @@ struct drm_panel_funcs {
> struct drm_panel {
> struct drm_device *drm;
> struct drm_connector *connector;
> + const struct drm_timings *timings;
> struct device *dev;
>
> const struct drm_panel_funcs *funcs;
--
Regards,
Laurent Pinchart
Powered by blists - more mailing lists