[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1bfdc7c4-e615-0df2-1c0d-4358edcdb43b@huawei.com>
Date: Wed, 28 Aug 2019 13:33:58 +0800
From: Jason Yan <yanaijie@...wei.com>
To: Scott Wood <oss@...error.net>
CC: <wangkefeng.wang@...wei.com>, <keescook@...omium.org>,
<kernel-hardening@...ts.openwall.com>,
<thunder.leizhen@...wei.com>, <linux-kernel@...r.kernel.org>,
<npiggin@...il.com>, <jingxiangfeng@...wei.com>,
<diana.craciun@....com>, <paulus@...ba.org>,
<zhaohongjiang@...wei.com>, <fanchengyang@...wei.com>,
<linuxppc-dev@...ts.ozlabs.org>, <yebin10@...wei.com>
Subject: Re: [PATCH v6 04/12] powerpc/fsl_booke/32: introduce
create_tlb_entry() helper
Hi Scott,
Thanks for your reply.
On 2019/8/28 6:07, Scott Wood wrote:
> On Fri, Aug 09, 2019 at 06:07:52PM +0800, Jason Yan wrote:
>> Add a new helper create_tlb_entry() to create a tlb entry by the virtual
>> and physical address. This is a preparation to support boot kernel at a
>> randomized address.
>>
>> Signed-off-by: Jason Yan <yanaijie@...wei.com>
>> Cc: Diana Craciun <diana.craciun@....com>
>> Cc: Michael Ellerman <mpe@...erman.id.au>
>> Cc: Christophe Leroy <christophe.leroy@....fr>
>> Cc: Benjamin Herrenschmidt <benh@...nel.crashing.org>
>> Cc: Paul Mackerras <paulus@...ba.org>
>> Cc: Nicholas Piggin <npiggin@...il.com>
>> Cc: Kees Cook <keescook@...omium.org>
>> Reviewed-by: Christophe Leroy <christophe.leroy@....fr>
>> Reviewed-by: Diana Craciun <diana.craciun@....com>
>> Tested-by: Diana Craciun <diana.craciun@....com>
>> ---
>> arch/powerpc/kernel/head_fsl_booke.S | 29 ++++++++++++++++++++++++++++
>> arch/powerpc/mm/mmu_decl.h | 1 +
>> 2 files changed, 30 insertions(+)
>>
>> diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S
>> index adf0505dbe02..04d124fee17d 100644
>> --- a/arch/powerpc/kernel/head_fsl_booke.S
>> +++ b/arch/powerpc/kernel/head_fsl_booke.S
>> @@ -1114,6 +1114,35 @@ __secondary_hold_acknowledge:
>> .long -1
>> #endif
>>
>> +/*
>> + * Create a 64M tlb by address and entry
>> + * r3/r4 - physical address
>> + * r5 - virtual address
>> + * r6 - entry
>> + */
>> +_GLOBAL(create_tlb_entry)
>
> This function is broadly named but contains various assumptions about the
> entry being created. I'd just call it create_kaslr_tlb_entry.
>
OK.
>> + lis r7,0x1000 /* Set MAS0(TLBSEL) = 1 */
>> + rlwimi r7,r6,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r6) */
>> + mtspr SPRN_MAS0,r7 /* Write MAS0 */
>> +
>> + lis r6,(MAS1_VALID|MAS1_IPROT)@h
>> + ori r6,r6,(MAS1_TSIZE(BOOK3E_PAGESZ_64M))@l
>> + mtspr SPRN_MAS1,r6 /* Write MAS1 */
>> +
>> + lis r6,MAS2_EPN_MASK(BOOK3E_PAGESZ_64M)@h
>> + ori r6,r6,MAS2_EPN_MASK(BOOK3E_PAGESZ_64M)@l
>> + and r6,r6,r5
>> + ori r6,r6,MAS2_M@l
>> + mtspr SPRN_MAS2,r6 /* Write MAS2(EPN) */
>> +
>> + ori r8,r4,(MAS3_SW|MAS3_SR|MAS3_SX)
>> + mtspr SPRN_MAS3,r8 /* Write MAS3(RPN) */
>> +
>> + tlbwe /* Write TLB */
>> + isync
>> + sync
>> + blr
>
> Should set MAS7 under MMU_FTR_BIG_PHYS (or CONFIG_PHYS_64BIT if it's
> too early for features) -- even if relocatable kernels over 4GiB aren't
> supported (I don't remember if they work or not), MAS7 might be non-zero
> on entry. And the function claims to take a 64-bit phys addr as input...
>
Good catch. And I should consider 32-bit phys addr as input too. I will
fix this in next version. Thanks.
> MAS2_M should be MAS2_M_IF_NEEDED to match other kmem tlb entries.
>
OK
> -Scott
>
> .
>
Powered by blists - more mailing lists