lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <472bee84-d62b-bfcb-eb83-db881165756b@fnarfbargle.com>
Date:   Wed, 28 Aug 2019 15:09:07 +0800
From:   Brad Campbell <lists2009@...rfbargle.com>
To:     linux-kernel@...r.kernel.org
Cc:     michael.jamet@...el.com, mika.westerberg@...ux.intel.com,
        YehezkelShB@...il.com
Subject: Thunderbolt DP oddity on v5.2.9 on iMac 12,2

G'day All,

5.2 is the first kernel that has allowed me to use 2 Apple Thunderbolt 
display on a 2011 vintage iMac. Awesome work and many thanks!

I boot this machine in BIOS (Bootcamp) mode as that gave me brightness 
control over the internal panel.

I've been using it with a Thunderbolt display and a standard DVI display 
since 2012 as the Apple firmware would only set up a single Thunderbolt 
display at bootup. Didn't find that out until I'd bought a second one 
and kept it around as a spare.

When I saw the changelog for 5.2 I thought I'd see if it would run 2 
Thnunderbolt displays, and it does after a minor fiddle. I have tried 
this with the Kanex adapter unplugged just for completeness. No change.

When I boot the machine it picks up both displays :

[    1.072080] thunderbolt 0-1: new device found, vendor=0x1 device=0x8002
[    1.072086] thunderbolt 0-1: Apple, Inc. Thunderbolt Display
[    1.392076] random: crng init done
[    1.595609] thunderbolt 0-3: new device found, vendor=0x1 device=0x8002
[    1.595615] thunderbolt 0-3: Apple, Inc. Thunderbolt Display
[    1.905117] thunderbolt 0-303: new device found, vendor=0xa7 device=0x4
[    1.905121] thunderbolt 0-303: Kanex Thunderbolt to eSATA+USB3.0 Adapter
[    1.910098] thunderbolt 0000:07:00.0: 0:c: path does not end on a DP 
adapter, cleaning up

Display 0-3 works. Display 0-1 remains blank.

If I unplug 0-1 and re-plug it, it is detected and comes up perfectly.

[   21.737262] thunderbolt 0-1: device disconnected
[   21.781805] pcieport 0000:3a:04.0: pciehp: pciehp_isr: no response 
from device
[   21.784850] pcieport 0000:3a:04.0: pciehp: pciehp_isr: no response 
from device
[   21.787854] pcieport 0000:06:04.0: pciehp: Slot(4-1): Link Down
[   21.790831] pcieport 0000:06:04.0: pciehp: Slot(4-1): Card not present
[   21.792206] pcieport 0000:3a:05.0: Refused to change power state, 
currently in D3
[   21.793742] pcieport 0000:3a:04.0: Refused to change power state, 
currently in D3
[   21.991585] firewire_ohci 0000:3f:00.0: removed fw-ohci device
[   22.890374] br0: port 2(eth1) entered disabled state
[   22.891871] device eth1 left promiscuous mode
[   22.893234] br0: port 2(eth1) entered disabled state
[   22.990171] ehci-pci 0000:3d:00.2: HC died; cleaning up
[   23.040162] ehci-pci 0000:3d:00.2: remove, state 1
[   23.041462] usb usb7: USB disconnect, device number 1
[   23.042751] usb 7-1: USB disconnect, device number 2
[   23.044067] usb 7-1.4: USB disconnect, device number 3
[   23.063357] usb 7-1.5: USB disconnect, device number 4
[   23.119918] usb 7-1.7: USB disconnect, device number 5
[   23.619254] ehci-pci 0000:3d:00.2: USB bus 7 deregistered
[   23.620734] pci_bus 0000:3d: busn_res: [bus 3d] is released
[   23.622128] pci_bus 0000:3c: busn_res: [bus 3c-3d] is released
[   23.623438] pci_bus 0000:3b: busn_res: [bus 3b-3d] is released
[   23.624760] pci_bus 0000:3e: busn_res: [bus 3e] is released
[   23.626058] pci_bus 0000:3f: busn_res: [bus 3f] is released
[   23.627323] pci_bus 0000:40: busn_res: [bus 40] is released
[   23.628548] pci_bus 0000:41: busn_res: [bus 41] is released
[   23.629801] pci_bus 0000:3a: busn_res: [bus 3a-41] is released
[   25.372961] thunderbolt 0-1: new device found, vendor=0x1 device=0x8002
[   25.375600] thunderbolt 0-1: Apple, Inc. Thunderbolt Display
[   25.381347] ------------[ cut here ]------------
[   25.383888] thunderbolt 0000:07:00.0: CFG_ERROR(0:d): Invalid config 
space or offset
[   25.385530] WARNING: CPU: 6 PID: 1486 at 
drivers/thunderbolt/ctl.c:271 tb_cfg_print_error.isra.1+0x15a/0x1b0
[   25.387156] Modules linked in: af_packet bridge stp llc applesmc 
input_polldev led_class btusb btbcm btintel coretemp bluetooth kvm_intel 
rfkill uvcvideo kvm irqbypass snd_usb_audio videobuf2_vmalloc 
ecdh_generic snd_hda_codec_cirrus snd_hda_codec_generic ecc 
snd_usbmidi_lib videobuf2_memops videobuf2_v4l2 joydev snd_rawmidi evdev 
videodev videobuf2_common snd_hda_codec_hdmi snd_hda_intel snd_hda_codec 
snd_hwdep snd_hda_core snd_pcm snd_timer snd soundcore apple_bl button 
ext4 crc32c_generic crc16 mbcache jbd2 hid_apple hid_appleir hid_generic 
usbhid hid usb_storage sg sr_mod cdrom sd_mod radeon aesni_intel 
i2c_algo_bit aes_x86_64 backlight glue_helper crypto_simd cryptd 
drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops xhci_pci 
ahci ttm ehci_pci uhci_hcd xhci_hcd libahci ehci_hcd firewire_ohci tg3 
drm firewire_core crc_itu_t usbcore libphy i2c_core usb_common
[   25.392675] CPU: 6 PID: 1486 Comm: kworker/u16:7 Not tainted 5.2.9 #4
[   25.394589] Hardware name: Apple Inc. iMac12,2/Mac-942B59F58194171B, 
BIOS 87.0.0.0.0 06/14/2019
[   25.396532] Workqueue: thunderbolt0 tb_handle_hotplug
[   25.398466] RIP: 0010:tb_cfg_print_error.isra.1+0x15a/0x1b0
[   25.400389] Code: 00 48 85 db 74 4a 48 81 c7 b0 00 00 00 e8 ae 03 f9 
ff 41 89 e8 4c 89 e1 48 89 da 48 89 c6 48 c7 c7 c0 80 b1 81 e8 26 7a d0 
ff <0f> 0b 48 83 c4 08 5b 5d 41 5c c3 48 c7 c7 38 3a ad 81 48 89 34 24
[   25.402408] RSP: 0018:ffffc90000757d40 EFLAGS: 00010286
[   25.404436] RAX: 0000000000000000 RBX: ffff88845d4c9ba0 RCX: 
ffffffff81c2cd18
[   25.406464] RDX: 0000000000000001 RSI: 0000000000000082 RDI: 
ffffffff81f3d6ac
[   25.408489] RBP: 000000000000000d R08: 0000000000000000 R09: 
000000000000063b
[   25.410510] R10: ffffea001174fc80 R11: ffffffff81a3c2a0 R12: 
0000000000000000
[   25.412529] R13: 0000000000000000 R14: 0000000000000000 R15: 
ffff88845843f660
[   25.414556] FS:  0000000000000000(0000) GS:ffff88845f980000(0000) 
knlGS:0000000000000000
[   25.416591] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   25.418611] CR2: 00007f2e56ca95e0 CR3: 0000000001c09003 CR4: 
00000000000606a0
[   25.420622] Call Trace:
[   25.422628]  tb_cfg_read+0xb9/0xd0
[   25.424580]  __tb_path_deactivate_hop+0x98/0x210
[   25.426498]  tb_path_activate+0x12e/0x350
[   25.428365]  tb_tunnel_restart+0x88/0x160
[   25.430188]  tb_handle_hotplug+0x19e/0x320
[   25.432005]  process_one_work+0x1b4/0x340
[   25.433815]  worker_thread+0x44/0x3d0
[   25.435624]  kthread+0xeb/0x120
[   25.437437]  ? process_one_work+0x340/0x340
[   25.439248]  ? kthread_park+0xa0/0xa0
[   25.441057]  ret_from_fork+0x1f/0x30
[   25.442867] ---[ end trace 72e754bc9654a0bb ]---
[   25.446308] ------------[ cut here ]------------
[   25.447690] thunderbolt 0000:07:00.0: CFG_ERROR(0:d): Invalid config 
space or offset
[   25.448998] WARNING: CPU: 6 PID: 1486 at 
drivers/thunderbolt/ctl.c:271 tb_cfg_print_error.isra.1+0x15a/0x1b0
[   25.450306] Modules linked in: af_packet bridge stp llc applesmc 
input_polldev led_class btusb btbcm btintel coretemp bluetooth kvm_intel 
rfkill uvcvideo kvm irqbypass snd_usb_audio videobuf2_vmalloc 
ecdh_generic snd_hda_codec_cirrus snd_hda_codec_generic ecc 
snd_usbmidi_lib videobuf2_memops videobuf2_v4l2 joydev snd_rawmidi evdev 
videodev videobuf2_common snd_hda_codec_hdmi snd_hda_intel snd_hda_codec 
snd_hwdep snd_hda_core snd_pcm snd_timer snd soundcore apple_bl button 
ext4 crc32c_generic crc16 mbcache jbd2 hid_apple hid_appleir hid_generic 
usbhid hid usb_storage sg sr_mod cdrom sd_mod radeon aesni_intel 
i2c_algo_bit aes_x86_64 backlight glue_helper crypto_simd cryptd 
drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops xhci_pci 
ahci ttm ehci_pci uhci_hcd xhci_hcd libahci ehci_hcd firewire_ohci tg3 
drm firewire_core crc_itu_t usbcore libphy i2c_core usb_common
[   25.454487] CPU: 6 PID: 1486 Comm: kworker/u16:7 Tainted: G        W 
       5.2.9 #4
[   25.455913] Hardware name: Apple Inc. iMac12,2/Mac-942B59F58194171B, 
BIOS 87.0.0.0.0 06/14/2019
[   25.457353] Workqueue: thunderbolt0 tb_handle_hotplug
[   25.458802] RIP: 0010:tb_cfg_print_error.isra.1+0x15a/0x1b0
[   25.460245] Code: 00 48 85 db 74 4a 48 81 c7 b0 00 00 00 e8 ae 03 f9 
ff 41 89 e8 4c 89 e1 48 89 da 48 89 c6 48 c7 c7 c0 80 b1 81 e8 26 7a d0 
ff <0f> 0b 48 83 c4 08 5b 5d 41 5c c3 48 c7 c7 38 3a ad 81 48 89 34 24
[   25.461748] RSP: 0018:ffffc90000757d40 EFLAGS: 00010286
[   25.463260] RAX: 0000000000000000 RBX: ffff88845d4c9ba0 RCX: 
ffffffff81c2cd18
[   25.464773] RDX: 0000000000000001 RSI: 0000000000000082 RDI: 
ffffffff81f3d6ac
[   25.466277] RBP: 000000000000000d R08: 0000000000000000 R09: 
000000000000065a
[   25.467760] R10: ffffea001174fc80 R11: ffffffff81a3c2a0 R12: 
0000000000000000
[   25.469227] R13: 0000000000000000 R14: 0000000000000000 R15: 
ffff88845843f660
[   25.470716] FS:  0000000000000000(0000) GS:ffff88845f980000(0000) 
knlGS:0000000000000000
[   25.472196] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   25.473678] CR2: 00007f2e56ca95e0 CR3: 0000000001c09003 CR4: 
00000000000606a0
[   25.475173] Call Trace:
[   25.476663]  tb_cfg_read+0xb9/0xd0
[   25.478151]  __tb_path_deactivate_hop+0x98/0x210
[   25.479646]  tb_path_activate+0x12e/0x350
[   25.481128]  tb_tunnel_restart+0x88/0x160
[   25.482600]  tb_handle_hotplug+0x19e/0x320
[   25.484073]  process_one_work+0x1b4/0x340
[   25.485548]  worker_thread+0x44/0x3d0
[   25.487018]  kthread+0xeb/0x120
[   25.488477]  ? process_one_work+0x340/0x340
[   25.489947]  ? kthread_park+0xa0/0xa0
[   25.491411]  ret_from_fork+0x1f/0x30
[   25.492874] ---[ end trace 72e754bc9654a0bc ]---
[   26.222937] radeon_dp_aux_transfer_native: 242 callbacks suppressed


Ignoring the warnings, once it's up and running everything does what it 
is supposed to do, I can bring the PCI devices back by authorising the 
device and everything just works. Given this machine gets rebooted a 
couple of times a year, it's not a big deal.

Is there anything I can do to try and figure out why the display isn't 
routed on boot, but is after a hotplug?

Full config and dmesg attached.

Regards,
Brad

View attachment "dmesg.01" of type "text/plain" (117472 bytes)

View attachment "config.txt" of type "text/plain" (106492 bytes)

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ