| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <HE1PR06MB40112AD52DAF0E837F23B441ACB90@HE1PR06MB4011.eurprd06.prod.outlook.com>
Date: Tue, 3 Sep 2019 20:33:46 +0000
From: Jonas Karlman <jonas@...boo.se>
To: Jernej Škrabec <jernej.skrabec@...l.net>,
Neil Armstrong <narmstrong@...libre.com>,
Cheng-Yi Chiang <cychiang@...omium.org>
CC: "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"dri-devel@...ts.freedesktop.org" <dri-devel@...ts.freedesktop.org>,
"alsa-devel@...a-project.org" <alsa-devel@...a-project.org>,
"tzungbi@...omium.org" <tzungbi@...omium.org>,
"zhengxing@...k-chips.com" <zhengxing@...k-chips.com>,
"kuninori.morimoto.gx@...esas.com" <kuninori.morimoto.gx@...esas.com>,
"a.hajda@...sung.com" <a.hajda@...sung.com>,
"airlied@...ux.ie" <airlied@...ux.ie>,
"kuankuan.y@...il.com" <kuankuan.y@...il.com>,
"jeffy.chen@...k-chips.com" <jeffy.chen@...k-chips.com>,
"dianders@...omium.org" <dianders@...omium.org>,
"cain.cai@...k-chips.com" <cain.cai@...k-chips.com>,
"linux-rockchip@...ts.infradead.org"
<linux-rockchip@...ts.infradead.org>,
"eddie.cai@...k-chips.com" <eddie.cai@...k-chips.com>,
"Laurent.pinchart@...asonboard.com"
<Laurent.pinchart@...asonboard.com>,
"daniel@...ll.ch" <daniel@...ll.ch>,
Yakir Yang <ykk@...k-chips.com>,
"enric.balletbo@...labora.com" <enric.balletbo@...labora.com>,
"dgreid@...omium.org" <dgreid@...omium.org>,
"sam@...nborg.org" <sam@...nborg.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>
Subject: Re: [PATCH] drm: bridge/dw_hdmi: add audio sample channel status
setting
On 2019-09-03 20:08, Jernej Škrabec wrote:
> Hi!
>
> Dne torek, 03. september 2019 ob 20:00:33 CEST je Neil Armstrong napisal(a):
>> Hi,
>>
>> Le 03/09/2019 à 11:53, Neil Armstrong a écrit :
>>> Hi,
>>>
>>> On 03/09/2019 07:51, Cheng-Yi Chiang wrote:
>>>> From: Yakir Yang <ykk@...k-chips.com>
>>>>
>>>> When transmitting IEC60985 linear PCM audio, we configure the
>>>> Audio Sample Channel Status information of all the channel
>>>> status bits in the IEC60958 frame.
>>>> Refer to 60958-3 page 10 for frequency, original frequency, and
>>>> wordlength setting.
>>>>
>>>> This fix the issue that audio does not come out on some monitors
>>>> (e.g. LG 22CV241)
>>>>
>>>> Signed-off-by: Yakir Yang <ykk@...k-chips.com>
>>>> Signed-off-by: Cheng-Yi Chiang <cychiang@...omium.org>
>>>> ---
>>>>
>>>> drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 59 +++++++++++++++++++++++
>>>> drivers/gpu/drm/bridge/synopsys/dw-hdmi.h | 20 ++++++++
>>>> 2 files changed, 79 insertions(+)
>>>>
>>>> diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
>>>> b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c index
>>>> bd65d0479683..34d46e25d610 100644
>>>> --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
>>>> +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
>>>> @@ -582,6 +582,63 @@ static unsigned int hdmi_compute_n(unsigned int
>>>> freq, unsigned long pixel_clk)>>
>>>> return n;
>>>>
>>>> }
>>>>
>>>> +static void hdmi_set_schnl(struct dw_hdmi *hdmi)
>>>> +{
>>>> + u8 aud_schnl_samplerate;
>>>> + u8 aud_schnl_8;
>>>> +
>>>> + /* These registers are on RK3288 using version 2.0a. */
>>>> + if (hdmi->version != 0x200a)
>>>> + return;
>>> Are these limited to the 2.0a version *in* RK3288, or 2.0a version on all
>>> SoCs ?
>> After investigations, Amlogic sets these registers on their 2.0a version
>> aswell, and Jernej (added in Cc) reported me Allwinner sets them on their
>> < 2.0a and > 2.0a IPs versions.
>>
>> Can you check on the Rockchip IP versions in RK3399 ?
>>
>> For reference, the HDMI 1.4a IP version allwinner setups is:
>> https://github.com/Allwinner-Homlet/H3-BSP4.4-linux/blob/master/drivers/vide
>> o/fbdev/sunxi/disp2/hdmi/hdmi_bsp_sun8iw7.c#L531-L539 (registers a
>> "scrambled" but a custom bit can reset to the original mapping, 0x1066 ...
>> 0x106f)
> For easier reading, here is similar, but annotated version: http://ix.io/1Ub6
> Check function bsp_hdmi_audio().
>
> Unless there is a special reason, you can just remove that check.
Agree, this check should not be needed, AUDSCHNLS7 used to be configured in my old
multi-channel patches that have seen lot of testing on Amlogic, Allwinner and Rockchip SoCs.
>
> Best regards,
> Jernej
>
>> Neil
>>
>>>> +
>>>> + switch (hdmi->sample_rate) {
>>>> + case 32000:
>>>> + aud_schnl_samplerate = HDMI_FC_AUDSCHNLS7_SMPRATE_32K;
>>>> + break;
>>>> + case 44100:
>>>> + aud_schnl_samplerate = HDMI_FC_AUDSCHNLS7_SMPRATE_44K1;
>>>> + break;
>>>> + case 48000:
>>>> + aud_schnl_samplerate = HDMI_FC_AUDSCHNLS7_SMPRATE_48K;
>>>> + break;
>>>> + case 88200:
>>>> + aud_schnl_samplerate = HDMI_FC_AUDSCHNLS7_SMPRATE_88K2;
>>>> + break;
>>>> + case 96000:
>>>> + aud_schnl_samplerate = HDMI_FC_AUDSCHNLS7_SMPRATE_96K;
>>>> + break;
>>>> + case 176400:
>>>> + aud_schnl_samplerate = HDMI_FC_AUDSCHNLS7_SMPRATE_176K4;
>>>> + break;
>>>> + case 192000:
>>>> + aud_schnl_samplerate = HDMI_FC_AUDSCHNLS7_SMPRATE_192K;
>>>> + break;
>>>> + case 768000:
>>>> + aud_schnl_samplerate = HDMI_FC_AUDSCHNLS7_SMPRATE_768K;
>>>> + break;
>>>> + default:
>>>> + dev_warn(hdmi->dev, "Unsupported audio sample rate (%u)\n",
>>>> + hdmi->sample_rate);
>>>> + return;
>>>> + }
>>>> +
>>>> + /* set channel status register */
>>>> + hdmi_modb(hdmi, aud_schnl_samplerate, HDMI_FC_AUDSCHNLS7_SMPRATE_MASK,
>>>> + HDMI_FC_AUDSCHNLS7);
>>>> +
>>>> + /*
>>>> + * Set original frequency to be the same as frequency.
>>>> + * Use one-complement value as stated in IEC60958-3 page 13.
>>>> + */
>>>> + aud_schnl_8 = (~aud_schnl_samplerate) <<
>>>> + HDMI_FC_AUDSCHNLS8_ORIGSAMPFREQ_OFFSET;
>>>> +
>>>> + /* This means word length is 16 bit. Refer to IEC60958-3 page 12. */
>>>> + aud_schnl_8 |= 2 << HDMI_FC_AUDSCHNLS8_WORDLEGNTH_OFFSET;
This looks wrong, user can use 16 and 24 bit wide audio streams.
>>>> +
>>>> + hdmi_writeb(hdmi, aud_schnl_8, HDMI_FC_AUDSCHNLS8);
>>>> +}
>>>> +
>>>>
>>>> static void hdmi_set_clk_regenerator(struct dw_hdmi *hdmi,
>>>>
>>>> unsigned long pixel_clk, unsigned int sample_rate)
>>>>
>>>> {
>>>>
>>>> @@ -620,6 +677,8 @@ static void hdmi_set_clk_regenerator(struct dw_hdmi
>>>> *hdmi,>>
>>>> hdmi->audio_cts = cts;
>>>> hdmi_set_cts_n(hdmi, cts, hdmi->audio_enable ? n : 0);
>>>> spin_unlock_irq(&hdmi->audio_lock);
>>>>
>>>> +
>>>> + hdmi_set_schnl(hdmi);
I will suggest this function is called from or merged with dw_hdmi_set_sample_rate().
Similar to how AUDSCONF and AUDICONF0 is configured from dw_hdmi_set_channel_count().
Regards,
Jonas
>>>>
>>>> }
>>>>
>>>> static void hdmi_init_clk_regenerator(struct dw_hdmi *hdmi)
>>>>
>>>> diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.h
>>>> b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.h index
>>>> 6988f12d89d9..619ebc1c8354 100644
>>>> --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.h
>>>> +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.h
>>>> @@ -158,6 +158,17 @@
>>>>
>>>> #define HDMI_FC_SPDDEVICEINF 0x1062
>>>> #define HDMI_FC_AUDSCONF 0x1063
>>>> #define HDMI_FC_AUDSSTAT 0x1064
>>>>
>>>> +#define HDMI_FC_AUDSV 0x1065
>>>> +#define HDMI_FC_AUDSU 0x1066
>>>> +#define HDMI_FC_AUDSCHNLS0 0x1067
>>>> +#define HDMI_FC_AUDSCHNLS1 0x1068
>>>> +#define HDMI_FC_AUDSCHNLS2 0x1069
>>>> +#define HDMI_FC_AUDSCHNLS3 0x106a
>>>> +#define HDMI_FC_AUDSCHNLS4 0x106b
>>>> +#define HDMI_FC_AUDSCHNLS5 0x106c
>>>> +#define HDMI_FC_AUDSCHNLS6 0x106d
>>>> +#define HDMI_FC_AUDSCHNLS7 0x106e
>>>> +#define HDMI_FC_AUDSCHNLS8 0x106f
>>>>
>>>> #define HDMI_FC_DATACH0FILL 0x1070
>>>> #define HDMI_FC_DATACH1FILL 0x1071
>>>> #define HDMI_FC_DATACH2FILL 0x1072
>>>>
>>>> @@ -706,6 +717,15 @@ enum {
>>>>
>>>> /* HDMI_FC_AUDSCHNLS7 field values */
>>>>
>>>> HDMI_FC_AUDSCHNLS7_ACCURACY_OFFSET = 4,
>>>> HDMI_FC_AUDSCHNLS7_ACCURACY_MASK = 0x30,
>>>>
>>>> + HDMI_FC_AUDSCHNLS7_SMPRATE_MASK = 0x0f,
>>>> + HDMI_FC_AUDSCHNLS7_SMPRATE_192K = 0xe,
>>>> + HDMI_FC_AUDSCHNLS7_SMPRATE_176K4 = 0xc,
>>>> + HDMI_FC_AUDSCHNLS7_SMPRATE_96K = 0xa,
>>>> + HDMI_FC_AUDSCHNLS7_SMPRATE_768K = 0x9,
>>>> + HDMI_FC_AUDSCHNLS7_SMPRATE_88K2 = 0x8,
>>>> + HDMI_FC_AUDSCHNLS7_SMPRATE_32K = 0x3,
>>>> + HDMI_FC_AUDSCHNLS7_SMPRATE_48K = 0x2,
>>>> + HDMI_FC_AUDSCHNLS7_SMPRATE_44K1 = 0x0,
>>>>
>>>> /* HDMI_FC_AUDSCHNLS8 field values */
>>>>
>>>> HDMI_FC_AUDSCHNLS8_ORIGSAMPFREQ_MASK = 0xf0,
Powered by blists - more mailing lists