| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAFv8NwKHZM+zTu7GF_J0Xk6hubA2JK4cCsdhsDPOGk=3rnbCZw@mail.gmail.com>
Date: Wed, 4 Sep 2019 17:09:29 +0800
From: Cheng-yi Chiang <cychiang@...omium.org>
To: Neil Armstrong <narmstrong@...libre.com>
Cc: linux-kernel <linux-kernel@...r.kernel.org>,
"moderated list:SOUND - SOC LAYER / DYNAMIC AUDIO POWER MANAGEM..."
<alsa-devel@...a-project.org>, tzungbi@...omium.org,
Xing Zheng <zhengxing@...k-chips.com>,
kuninori.morimoto.gx@...esas.com,
Andrzej Hajda <a.hajda@...sung.com>,
David Airlie <airlied@...ux.ie>, kuankuan.y@...il.com,
Jeffy Chen <jeffy.chen@...k-chips.com>,
Doug Anderson <dianders@...omium.org>,
dri-devel@...ts.freedesktop.org, cain.cai@...k-chips.com,
linux-rockchip@...ts.infradead.org,
蔡枫 <eddie.cai@...k-chips.com>,
Laurent Pinchart <Laurent.pinchart@...asonboard.com>,
Daniel Vetter <daniel@...ll.ch>,
Yakir Yang <ykk@...k-chips.com>,
Enric Balletbo i Serra <enric.balletbo@...labora.com>,
Dylan Reid <dgreid@...omium.org>, sam@...nborg.org,
linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH] drm: bridge/dw_hdmi: add audio sample channel status setting
Hi,
On Tue, Sep 3, 2019 at 5:53 PM Neil Armstrong <narmstrong@...libre.com> wrote:
>
> Hi,
>
> On 03/09/2019 07:51, Cheng-Yi Chiang wrote:
> > From: Yakir Yang <ykk@...k-chips.com>
> >
> > When transmitting IEC60985 linear PCM audio, we configure the
> > Audio Sample Channel Status information of all the channel
> > status bits in the IEC60958 frame.
> > Refer to 60958-3 page 10 for frequency, original frequency, and
> > wordlength setting.
> >
> > This fix the issue that audio does not come out on some monitors
> > (e.g. LG 22CV241)
> >
> > Signed-off-by: Yakir Yang <ykk@...k-chips.com>
> > Signed-off-by: Cheng-Yi Chiang <cychiang@...omium.org>
> > ---
> > drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 59 +++++++++++++++++++++++
> > drivers/gpu/drm/bridge/synopsys/dw-hdmi.h | 20 ++++++++
> > 2 files changed, 79 insertions(+)
> >
> > diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> > index bd65d0479683..34d46e25d610 100644
> > --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> > +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> > @@ -582,6 +582,63 @@ static unsigned int hdmi_compute_n(unsigned int freq, unsigned long pixel_clk)
> > return n;
> > }
> >
> > +static void hdmi_set_schnl(struct dw_hdmi *hdmi)
> > +{
> > + u8 aud_schnl_samplerate;
> > + u8 aud_schnl_8;
> > +
> > + /* These registers are on RK3288 using version 2.0a. */
> > + if (hdmi->version != 0x200a)
> > + return;
>
> Are these limited to the 2.0a version *in* RK3288, or 2.0a version on all
> SoCs ?
>
In the original patch by Yakir,
https://lore.kernel.org/patchwork/patch/539653/ (sorry, I should
have added this link in the "after the cut" note)
The fix is limited to version 2.0.
Since I am only testing on RK3288 with 2.0a, I change the check to 2.0a only.
I can not test 2.0a version on other SoCs.
The databook I have at hand is 2.0a (not specific to RK3288) so I
think all 2.0a should have this register.
As for other version like version 1.3 on iMX6, there is no such
register, as stated by Russell
http://lkml.iu.edu/hypermail/linux/kernel/1501.3/06268.html.
So at least we should check the version.
Maybe we can set the criteria as version 2.0 or above to make it a safe patch ?
If there is the same need on other SoC with version < 2.0, it can be
added later.
Presumably, there will be databook of that version to help confirming
this setting.
Thanks!
> > +
> > + switch (hdmi->sample_rate) {
> > + case 32000:
> > + aud_schnl_samplerate = HDMI_FC_AUDSCHNLS7_SMPRATE_32K;
> > + break;
> > + case 44100:
> > + aud_schnl_samplerate = HDMI_FC_AUDSCHNLS7_SMPRATE_44K1;
> > + break;
> > + case 48000:
> > + aud_schnl_samplerate = HDMI_FC_AUDSCHNLS7_SMPRATE_48K;
> > + break;
> > + case 88200:
> > + aud_schnl_samplerate = HDMI_FC_AUDSCHNLS7_SMPRATE_88K2;
> > + break;
> > + case 96000:
> > + aud_schnl_samplerate = HDMI_FC_AUDSCHNLS7_SMPRATE_96K;
> > + break;
> > + case 176400:
> > + aud_schnl_samplerate = HDMI_FC_AUDSCHNLS7_SMPRATE_176K4;
> > + break;
> > + case 192000:
> > + aud_schnl_samplerate = HDMI_FC_AUDSCHNLS7_SMPRATE_192K;
> > + break;
> > + case 768000:
> > + aud_schnl_samplerate = HDMI_FC_AUDSCHNLS7_SMPRATE_768K;
> > + break;
> > + default:
> > + dev_warn(hdmi->dev, "Unsupported audio sample rate (%u)\n",
> > + hdmi->sample_rate);
> > + return;
> > + }
> > +
> > + /* set channel status register */
> > + hdmi_modb(hdmi, aud_schnl_samplerate, HDMI_FC_AUDSCHNLS7_SMPRATE_MASK,
> > + HDMI_FC_AUDSCHNLS7);
> > +
> > + /*
> > + * Set original frequency to be the same as frequency.
> > + * Use one-complement value as stated in IEC60958-3 page 13.
> > + */
> > + aud_schnl_8 = (~aud_schnl_samplerate) <<
> > + HDMI_FC_AUDSCHNLS8_ORIGSAMPFREQ_OFFSET;
> > +
> > + /* This means word length is 16 bit. Refer to IEC60958-3 page 12. */
> > + aud_schnl_8 |= 2 << HDMI_FC_AUDSCHNLS8_WORDLEGNTH_OFFSET;
> > +
> > + hdmi_writeb(hdmi, aud_schnl_8, HDMI_FC_AUDSCHNLS8);
> > +}
> > +
> > static void hdmi_set_clk_regenerator(struct dw_hdmi *hdmi,
> > unsigned long pixel_clk, unsigned int sample_rate)
> > {
> > @@ -620,6 +677,8 @@ static void hdmi_set_clk_regenerator(struct dw_hdmi *hdmi,
> > hdmi->audio_cts = cts;
> > hdmi_set_cts_n(hdmi, cts, hdmi->audio_enable ? n : 0);
> > spin_unlock_irq(&hdmi->audio_lock);
> > +
> > + hdmi_set_schnl(hdmi);
> > }
> >
> > static void hdmi_init_clk_regenerator(struct dw_hdmi *hdmi)
> > diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.h b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.h
> > index 6988f12d89d9..619ebc1c8354 100644
> > --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.h
> > +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.h
> > @@ -158,6 +158,17 @@
> > #define HDMI_FC_SPDDEVICEINF 0x1062
> > #define HDMI_FC_AUDSCONF 0x1063
> > #define HDMI_FC_AUDSSTAT 0x1064
> > +#define HDMI_FC_AUDSV 0x1065
> > +#define HDMI_FC_AUDSU 0x1066
> > +#define HDMI_FC_AUDSCHNLS0 0x1067
> > +#define HDMI_FC_AUDSCHNLS1 0x1068
> > +#define HDMI_FC_AUDSCHNLS2 0x1069
> > +#define HDMI_FC_AUDSCHNLS3 0x106a
> > +#define HDMI_FC_AUDSCHNLS4 0x106b
> > +#define HDMI_FC_AUDSCHNLS5 0x106c
> > +#define HDMI_FC_AUDSCHNLS6 0x106d
> > +#define HDMI_FC_AUDSCHNLS7 0x106e
> > +#define HDMI_FC_AUDSCHNLS8 0x106f
> > #define HDMI_FC_DATACH0FILL 0x1070
> > #define HDMI_FC_DATACH1FILL 0x1071
> > #define HDMI_FC_DATACH2FILL 0x1072
> > @@ -706,6 +717,15 @@ enum {
> > /* HDMI_FC_AUDSCHNLS7 field values */
> > HDMI_FC_AUDSCHNLS7_ACCURACY_OFFSET = 4,
> > HDMI_FC_AUDSCHNLS7_ACCURACY_MASK = 0x30,
> > + HDMI_FC_AUDSCHNLS7_SMPRATE_MASK = 0x0f,
> > + HDMI_FC_AUDSCHNLS7_SMPRATE_192K = 0xe,
> > + HDMI_FC_AUDSCHNLS7_SMPRATE_176K4 = 0xc,
> > + HDMI_FC_AUDSCHNLS7_SMPRATE_96K = 0xa,
> > + HDMI_FC_AUDSCHNLS7_SMPRATE_768K = 0x9,
> > + HDMI_FC_AUDSCHNLS7_SMPRATE_88K2 = 0x8,
> > + HDMI_FC_AUDSCHNLS7_SMPRATE_32K = 0x3,
> > + HDMI_FC_AUDSCHNLS7_SMPRATE_48K = 0x2,
> > + HDMI_FC_AUDSCHNLS7_SMPRATE_44K1 = 0x0,
> >
> > /* HDMI_FC_AUDSCHNLS8 field values */
> > HDMI_FC_AUDSCHNLS8_ORIGSAMPFREQ_MASK = 0xf0,
> >
>
Powered by blists - more mailing lists