linux-kernel - Re: [PATCH 3/3] dt-bindings: ddr: Add bindings for Samsung LPDDR3 memories

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <CAJKOXPfoYxTVvt_bMQOs1=BkHzUuW_WvL9zn0jTGS6LLpv=fhQ@mail.gmail.com>
Date:   Fri, 6 Sep 2019 12:56:42 +0200
From:   Krzysztof Kozlowski <krzk@...nel.org>
To:     Lukasz Luba <l.luba@...tner.samsung.com>
Cc:     devicetree@...r.kernel.org,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
        linux-pm@...r.kernel.org,
        "linux-samsung-soc@...r.kernel.org" 
        <linux-samsung-soc@...r.kernel.org>,
        linux-arm-kernel@...ts.infradead.org,
        Bartłomiej Żołnierkiewicz 
        <b.zolnierkie@...sung.com>, kgene@...nel.org, mark.rutland@....com,
        robh+dt@...nel.org, Chanwoo Choi <cw00.choi@...sung.com>,
        kyungmin.park@...sung.com,
        Marek Szyprowski <m.szyprowski@...sung.com>,
        s.nawrocki@...sung.com, myungjoo.ham@...sung.com,
        willy.mh.wolff.ml@...il.com
Subject: Re: [PATCH 3/3] dt-bindings: ddr: Add bindings for Samsung LPDDR3 memories

On Fri, 6 Sep 2019 at 12:14, Lukasz Luba <l.luba@...tner.samsung.com> wrote:
>
> Add description of bindings for Samsung k3qf2f20db LPDDR3 memory.
> Minor fixes in the old documentation.
>
> Signed-off-by: Lukasz Luba <l.luba@...tner.samsung.com>
> ---
>  .../devicetree/bindings/ddr/lpddr3.txt        | 29 +++++++++++++++++--
>  1 file changed, 27 insertions(+), 2 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/ddr/lpddr3.txt b/Documentation/devicetree/bindings/ddr/lpddr3.txt
> index 3b2485b84b3f..de0905239767 100644
> --- a/Documentation/devicetree/bindings/ddr/lpddr3.txt
> +++ b/Documentation/devicetree/bindings/ddr/lpddr3.txt
> @@ -40,10 +40,34 @@ Child nodes:
>    a given speed-bin. Please see Documentation/devicetree/
>    bindings/ddr/lpddr3-timings.txt for more information on "lpddr3-timings"
>
> +Samsung K3QF2F20DB LPDDR3 memory
> +------------------------------------------------------------
> +
> +This binding uses the LPDDR3 binding (described above)
> +
> +Required properties:
> +- compatible:  Should be:
> +               "samsung,K3QF2F20DB"
> +               followed by "jedec,lpddr3"
> +- density  : <u32> representing density in Mb (Mega bits)
> +- io-width : <u32> representing bus width. Possible value 32
> +- #address-cells: Must be set to 1
> +- #size-cells: Must be set to 0

If you decided to repeat all properties again, then it deserves its
own bindings file. However I though about simpler solution - just
document compatible. Exactly the same as AT24 or AT25 EEPROM bindings.
There is not much benefit from copying all these properties.

Best regards,
Krzysztof