[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20190906130256.10321-2-alexandru.ardelean@analog.com>
Date: Fri, 6 Sep 2019 16:02:56 +0300
From: Alexandru Ardelean <alexandru.ardelean@...log.com>
To: <netdev@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>
CC: <davem@...emloft.net>, <robh+dt@...nel.org>,
<peppe.cavallaro@...com>, <alexandre.torgue@...com>,
<--cc=andrew@...n.ch>,
Alexandru Ardelean <alexandru.ardelean@...log.com>
Subject: [PATCH 2/2] dt-bindings: net: dwmac: document 'mac-mode' property
This change documents the 'mac-mode' property that was introduced in the
'stmmac' driver to support passive mode converters that can sit in-between
the MAC & PHY.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@...log.com>
---
Documentation/devicetree/bindings/net/snps,dwmac.yaml | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
index c78be15704b9..ebe4537a7cce 100644
--- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml
+++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
@@ -112,6 +112,14 @@ properties:
reset-names:
const: stmmaceth
+ mac-mode:
+ maxItems: 1
+ description:
+ The property is identical to 'phy-mode', and assumes that there is mode
+ converter in-between the MAC & PHY (e.g. GMII-to-RGMII). This converter
+ can be passive (no SW requirement), and requires that the MAC operate
+ in a different mode than the PHY in order to function.
+
snps,axi-config:
$ref: /schemas/types.yaml#definitions/phandle
description:
--
2.20.1
Powered by blists - more mailing lists