linux-kernel - [PATCH] net: Remove the source address setting in connect() for UDP

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20190906025437.613-1-enkechen@cisco.com>
Date:   Thu,  5 Sep 2019 19:54:37 -0700
From:   Enke Chen <enkechen@...co.com>
To:     "David S . Miller" <davem@...emloft.net>,
        Alexey Kuznetsov <kuznet@....inr.ac.ru>,
        Hideaki YOSHIFUJI <yoshfuji@...ux-ipv6.org>,
        netdev@...r.kernel.org
Cc:     enkechen@...co.com, linux-kernel@...r.kernel.org,
        xe-linux-external@...co.com
Subject: [PATCH] net: Remove the source address setting in connect() for UDP

The connect() system call for a UDP socket is for setting the destination
address and port. But the current code mistakenly sets the source address
for the socket as well. Remove the source address setting in connect() for
UDP in this patch.

Implications of the bug:

  - Packet drop:

    On a multi-homed device, an address assigned to any interface may
    qualify as a source address when originating a packet. If needed, the
    IP_PKTINFO option can be used to explicitly specify the source address.
    But with the source address being mistakenly set for the socket in
    connect(), a return packet (for the socket) destined to an interface
    address different from that source address would be wrongly dropped
    due to address mismatch.

    This can be reproduced easily. The dropped packets are shown in the
    following output by "netstat -s" for UDP:

          xxx packets to unknown port received

  - Source address selection:

    The source address, if unspecified via "bind()" or IP_PKTINFO, should
    be determined by routing at the time of packet origination, and not at
    the time when the connect() call is made. The difference matters as
    routing can change, e.g., by interface down/up events, and using a
    source address of an "down" interface is known to be problematic.

There is no backward compatibility issue here as the source address setting
in connect() is not needed anyway.

  - No impact on the source address selection when the source address
    is explicitly specified by "bind()", or by the "IP_PKTINFO" option.

  - In the case that the source address is not explicitly specified,
    the selection of the source address would be more accurate and
    reliable based on the up-to-date routing table.

Signed-off-by: Enke Chen <enkechen@...co.com>
---
 net/ipv4/datagram.c |  7 -------
 net/ipv6/datagram.c | 15 +--------------
 2 files changed, 1 insertion(+), 21 deletions(-)

diff --git a/net/ipv4/datagram.c b/net/ipv4/datagram.c
index f915abff1350..4065808ec6c1 100644
--- a/net/ipv4/datagram.c
+++ b/net/ipv4/datagram.c
@@ -64,13 +64,6 @@ int __ip4_datagram_connect(struct sock *sk, struct sockaddr *uaddr, int addr_len
 		err = -EACCES;
 		goto out;
 	}
-	if (!inet->inet_saddr)
-		inet->inet_saddr = fl4->saddr;	/* Update source address */
-	if (!inet->inet_rcv_saddr) {
-		inet->inet_rcv_saddr = fl4->saddr;
-		if (sk->sk_prot->rehash)
-			sk->sk_prot->rehash(sk);
-	}
 	inet->inet_daddr = fl4->daddr;
 	inet->inet_dport = usin->sin_port;
 	sk->sk_state = TCP_ESTABLISHED;
diff --git a/net/ipv6/datagram.c b/net/ipv6/datagram.c
index ecf440a4f593..80388cd50dc3 100644
--- a/net/ipv6/datagram.c
+++ b/net/ipv6/datagram.c
@@ -197,19 +197,6 @@ int __ip6_datagram_connect(struct sock *sk, struct sockaddr *uaddr,
 			goto out;
 
 		ipv6_addr_set_v4mapped(inet->inet_daddr, &sk->sk_v6_daddr);
-
-		if (ipv6_addr_any(&np->saddr) ||
-		    ipv6_mapped_addr_any(&np->saddr))
-			ipv6_addr_set_v4mapped(inet->inet_saddr, &np->saddr);
-
-		if (ipv6_addr_any(&sk->sk_v6_rcv_saddr) ||
-		    ipv6_mapped_addr_any(&sk->sk_v6_rcv_saddr)) {
-			ipv6_addr_set_v4mapped(inet->inet_rcv_saddr,
-					       &sk->sk_v6_rcv_saddr);
-			if (sk->sk_prot->rehash)
-				sk->sk_prot->rehash(sk);
-		}
-
 		goto out;
 	}
 
@@ -247,7 +234,7 @@ int __ip6_datagram_connect(struct sock *sk, struct sockaddr *uaddr,
 	 *	destination cache for it.
 	 */
 
-	err = ip6_datagram_dst_update(sk, true);
+	err = ip6_datagram_dst_update(sk, false);
 	if (err) {
 		/* Restore the socket peer info, to keep it consistent with
 		 * the old socket state
-- 
2.19.1