| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20190917155426.7432-20-tudor.ambarus@microchip.com>
Date: Tue, 17 Sep 2019 15:55:41 +0000
From: <Tudor.Ambarus@...rochip.com>
To: <vigneshr@...com>, <boris.brezillon@...labora.com>,
<marek.vasut@...il.com>, <miquel.raynal@...tlin.com>,
<richard@....at>, <linux-mtd@...ts.infradead.org>
CC: <dwmw2@...radead.org>, <computersforpeace@...il.com>,
<joel@....id.au>, <andrew@...id.au>, <matthias.bgg@...il.com>,
<vz@...ia.com>, <linux-arm-kernel@...ts.infradead.org>,
<linux-aspeed@...ts.ozlabs.org>, <linux-kernel@...r.kernel.org>,
<linux-mediatek@...ts.infradead.org>, <Tudor.Ambarus@...rochip.com>
Subject: [PATCH 19/23] mtd: spi-nor: Rework
spansion(_no)_read_cr_quad_enable()
From: Tudor Ambarus <tudor.ambarus@...rochip.com>
Merge:
spansion_no_read_cr_quad_enable()
spansion_read_cr_quad_enable()
in spi_nor_sr2_bit1_quad_enable().
Avoid duplication of code by using spi_nor_write_16bit_sr_and_check(),
the SNOR_F_NO_READ_CR case is treated there.
We now do the Read Back test even for the old
spansion_no_read_cr_quad_enable() case.
Signed-off-by: Tudor Ambarus <tudor.ambarus@...rochip.com>
---
drivers/mtd/spi-nor/spi-nor.c | 89 ++++++++++---------------------------------
include/linux/mtd/spi-nor.h | 4 +-
2 files changed, 22 insertions(+), 71 deletions(-)
diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
index 2f79923e7db5..8648666fb9bd 100644
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
@@ -907,7 +907,7 @@ static int spi_nor_write_16bit_sr_and_check(struct spi_nor *nor, u8 status_new,
* Write Status (01h) command is available just for the cases
* in which the QE bit is described in SR2 at BIT(1).
*/
- sr_cr[1] = CR_QUAD_EN_SPAN;
+ sr_cr[1] = SR2_QUAD_EN_BIT1;
} else {
sr_cr[1] = 0;
}
@@ -1963,81 +1963,34 @@ static int spi_nor_sr1_bit6_quad_enable(struct spi_nor *nor)
}
/**
- * spansion_no_read_cr_quad_enable() - set QE bit in Configuration Register.
+ * spi_nor_sr2_bit1_quad_enable() - set the Quad Enable BIT(1) in the Status
+ * Register 2.
* @nor: pointer to a 'struct spi_nor'
*
- * Set the Quad Enable (QE) bit in the Configuration Register.
- * This function should be used with QSPI memories not supporting the Read
- * Configuration Register (35h) instruction.
- *
- * bit 1 of the Configuration Register is the QE bit for Spansion like QSPI
- * memories.
- *
- * Return: 0 on success, -errno otherwise.
- */
-static int spansion_no_read_cr_quad_enable(struct spi_nor *nor)
-{
- u8 *sr_cr = nor->bouncebuf;
- int ret;
-
- /* Keep the current value of the Status Register. */
- ret = spi_nor_read_sr(nor, &sr_cr[0]);
- if (ret)
- return ret;
-
- sr_cr[1] = CR_QUAD_EN_SPAN;
-
- return spi_nor_write_sr(nor, sr_cr, 2);
-}
-
-/**
- * spansion_read_cr_quad_enable() - set QE bit in Configuration Register.
- * @nor: pointer to a 'struct spi_nor'
- *
- * Set the Quad Enable (QE) bit in the Configuration Register.
- * This function should be used with QSPI memories supporting the Read
- * Configuration Register (35h) instruction.
- *
- * bit 1 of the Configuration Register is the QE bit for Spansion like QSPI
- * memories.
+ * Bit 1 of the Status Register 2 is the QE bit for Spansion like QSPI memories.
*
* Return: 0 on success, -errno otherwise.
*/
-static int spansion_read_cr_quad_enable(struct spi_nor *nor)
+static int spi_nor_sr2_bit1_quad_enable(struct spi_nor *nor)
{
- u8 *sr_cr = nor->bouncebuf;
int ret;
- /* Check current Quad Enable bit value. */
- ret = spi_nor_read_cr(nor, &sr_cr[1]);
- if (ret)
- return ret;
-
- if (sr_cr[1] & CR_QUAD_EN_SPAN)
- return 0;
+ if (!(nor->flags & SNOR_F_NO_READ_CR)) {
+ /* Check current Quad Enable bit value. */
+ ret = spi_nor_read_cr(nor, &nor->bouncebuf[0]);
+ if (ret)
+ return ret;
- sr_cr[1] |= CR_QUAD_EN_SPAN;
+ if (nor->bouncebuf[0] & SR2_QUAD_EN_BIT1)
+ return 0;
+ }
/* Keep the current value of the Status Register. */
- ret = spi_nor_read_sr(nor, &sr_cr[0]);
- if (ret)
- return ret;
-
- ret = spi_nor_write_sr(nor, sr_cr, 2);
- if (ret)
- return ret;
-
- /* Read back and check it. */
- ret = spi_nor_read_cr(nor, &sr_cr[1]);
+ ret = spi_nor_read_sr(nor, &nor->bouncebuf[0]);
if (ret)
return ret;
- if (!(sr_cr[1] & CR_QUAD_EN_SPAN)) {
- dev_err(nor->dev, "Spansion Quad bit not set\n");
- return -EIO;
- }
-
- return 0;
+ return spi_nor_write_16bit_sr_and_check(nor, nor->bouncebuf[0], 0xFF);
}
/**
@@ -2117,7 +2070,7 @@ static int spi_nor_clear_sr_bp(struct spi_nor *nor)
*
* Read-modify-write function that clears the Block Protection bits from the
* Status Register without affecting other bits. The function is tightly
- * coupled with the spansion_read_cr_quad_enable() function. Both assume that
+ * coupled with the spi_nor_sr2_bit1_quad_enable() function. Both assume that
* the Write Register with 16 bits, together with the Read Configuration
* Register (35h) instructions are supported.
*
@@ -2138,7 +2091,7 @@ static int spi_nor_spansion_clear_sr_bp(struct spi_nor *nor)
* When the configuration register Quad Enable bit is one, only the
* Write Status (01h) command with two data bytes may be used.
*/
- if (sr_cr[1] & CR_QUAD_EN_SPAN) {
+ if (sr_cr[1] & SR2_QUAD_EN_BIT1) {
ret = spi_nor_read_sr(nor, &sr_cr[0]);
if (ret)
return ret;
@@ -3642,7 +3595,7 @@ static int spi_nor_parse_bfpt(struct spi_nor *nor,
* supported.
*/
nor->flags |= SNOR_F_NO_READ_CR;
- flash->quad_enable = spansion_no_read_cr_quad_enable;
+ flash->quad_enable = spi_nor_sr2_bit1_quad_enable;
break;
case BFPT_DWORD15_QER_SR1_BIT6:
@@ -3663,7 +3616,7 @@ static int spi_nor_parse_bfpt(struct spi_nor *nor,
* assumption of a 16-bit Write Status (01h) command.
*/
nor->flags |= SNOR_F_HAS_16BIT_SR;
- flash->quad_enable = spansion_read_cr_quad_enable;
+ flash->quad_enable = spi_nor_sr2_bit1_quad_enable;
break;
default:
@@ -4626,7 +4579,7 @@ static void spi_nor_info_init_flash_params(struct spi_nor *nor)
u8 i, erase_mask;
/* Initialize legacy flash parameters and settings. */
- flash->quad_enable = spansion_read_cr_quad_enable;
+ flash->quad_enable = spi_nor_sr2_bit1_quad_enable;
flash->set_4byte = spansion_set_4byte;
flash->setup = spi_nor_default_setup;
/* Default to 16-bit Write Status (01h) Command */
@@ -4844,7 +4797,7 @@ static int spi_nor_init(struct spi_nor *nor)
int err;
if (nor->clear_sr_bp) {
- if (nor->flash.quad_enable == spansion_read_cr_quad_enable)
+ if (nor->flash.quad_enable == spi_nor_sr2_bit1_quad_enable)
nor->clear_sr_bp = spi_nor_spansion_clear_sr_bp;
err = nor->clear_sr_bp(nor);
diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h
index 3a835de90b6a..5590a36eb43e 100644
--- a/include/linux/mtd/spi-nor.h
+++ b/include/linux/mtd/spi-nor.h
@@ -144,10 +144,8 @@
#define FSR_P_ERR BIT(4) /* Program operation status */
#define FSR_PT_ERR BIT(1) /* Protection error bit */
-/* Configuration Register bits. */
-#define CR_QUAD_EN_SPAN BIT(1) /* Spansion Quad I/O */
-
/* Status Register 2 bits. */
+#define SR2_QUAD_EN_BIT1 BIT(1)
#define SR2_QUAD_EN_BIT7 BIT(7)
/* Supported SPI protocols */
--
2.9.5
Powered by blists - more mailing lists