| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20190918131740.GA668@pi3>
Date: Wed, 18 Sep 2019 15:17:40 +0200
From: Krzysztof Kozlowski <krzk@...nel.org>
To: Rob Herring <robh@...nel.org>
Cc: Mark Rutland <mark.rutland@....com>, Kukjin Kim <kgene@...nel.org>,
Jonathan Cameron <jic23@...nel.org>,
Hartmut Knaack <knaack.h@....de>,
Lars-Peter Clausen <lars@...afoo.de>,
Peter Meerwald-Stadler <pmeerw@...erw.net>,
Sebastian Reichel <sre@...nel.org>,
Alessandro Zummo <a.zummo@...ertech.it>,
Alexandre Belloni <alexandre.belloni@...tlin.com>,
Paweł Chmiel <pawel.mikolaj.chmiel@...il.com>,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-samsung-soc@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-iio@...r.kernel.org, linux-pm@...r.kernel.org,
linux-rtc@...r.kernel.org
Subject: Re: [PATCH v2 07/11] dt-bindings: arm: samsung: Convert Exynos PMU
bindings to json-schema
On Wed, Sep 18, 2019 at 07:43:06AM -0500, Rob Herring wrote:
> On Sat, Sep 07, 2019 at 11:20:03AM +0200, Krzysztof Kozlowski wrote:
> > Convert Samsung Exynos Power Management Unit (PMU) bindings to DT schema
> > format using json-schema.
> >
> > Signed-off-by: Krzysztof Kozlowski <krzk@...nel.org>
> >
> > ---
> >
> > Changes since v1:
> > 1. Fix clock-names to match all elements against schema (any number of
> > any clkoutN values).
> > This currently fails:
> > properties:clock-names:items: {'enum': ['clkout0', 'clkout1', 'clkout2',
> > 'clkout3', 'clkout4', 'clkout5', 'clkout6', 'clkout7', 'clkout8',
> > 'clkout9', 'clkout10', 'clkout11', 'clkout12', 'clkout13', 'clkout14',
> > 'clkout15', 'clkout16']} is not of type 'array
> >
> > 2. Add syscon reboot and poweroff nodes.
> > ---
> > .../devicetree/bindings/arm/samsung/pmu.txt | 72 -----------
> > .../devicetree/bindings/arm/samsung/pmu.yaml | 117 ++++++++++++++++++
> > 2 files changed, 117 insertions(+), 72 deletions(-)
> > delete mode 100644 Documentation/devicetree/bindings/arm/samsung/pmu.txt
> > create mode 100644 Documentation/devicetree/bindings/arm/samsung/pmu.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/arm/samsung/pmu.txt b/Documentation/devicetree/bindings/arm/samsung/pmu.txt
> > deleted file mode 100644
> > index 433bfd7593ac..000000000000
> > --- a/Documentation/devicetree/bindings/arm/samsung/pmu.txt
> > +++ /dev/null
> > @@ -1,72 +0,0 @@
> > -SAMSUNG Exynos SoC series PMU Registers
> > -
> > -Properties:
> > - - compatible : should contain two values. First value must be one from following list:
> > - - "samsung,exynos3250-pmu" - for Exynos3250 SoC,
> > - - "samsung,exynos4210-pmu" - for Exynos4210 SoC,
> > - - "samsung,exynos4412-pmu" - for Exynos4412 SoC,
> > - - "samsung,exynos5250-pmu" - for Exynos5250 SoC,
> > - - "samsung,exynos5260-pmu" - for Exynos5260 SoC.
> > - - "samsung,exynos5410-pmu" - for Exynos5410 SoC,
> > - - "samsung,exynos5420-pmu" - for Exynos5420 SoC.
> > - - "samsung,exynos5433-pmu" - for Exynos5433 SoC.
> > - - "samsung,exynos7-pmu" - for Exynos7 SoC.
> > - second value must be always "syscon".
> > -
> > - - reg : offset and length of the register set.
> > -
> > - - #clock-cells : must be <1>, since PMU requires once cell as clock specifier.
> > - The single specifier cell is used as index to list of clocks
> > - provided by PMU, which is currently:
> > - 0 : SoC clock output (CLKOUT pin)
> > -
> > - - clock-names : list of clock names for particular CLKOUT mux inputs in
> > - following format:
> > - "clkoutN", where N is a decimal number corresponding to
> > - CLKOUT mux control bits value for given input, e.g.
> > - "clkout0", "clkout7", "clkout15".
> > -
> > - - clocks : list of phandles and specifiers to all input clocks listed in
> > - clock-names property.
> > -
> > -Optional properties:
> > -
> > -Some PMUs are capable of behaving as an interrupt controller (mostly
> > -to wake up a suspended PMU). In which case, they can have the
> > -following properties:
> > -
> > -- interrupt-controller: indicate that said PMU is an interrupt controller
> > -
> > -- #interrupt-cells: must be identical to the that of the parent interrupt
> > - controller.
> > -
> > -
> > -Optional nodes:
> > -
> > -- nodes defining the restart and poweroff syscon children
> > -
> > -
> > -Example :
> > -pmu_system_controller: system-controller@...40000 {
> > - compatible = "samsung,exynos5250-pmu", "syscon";
> > - reg = <0x10040000 0x5000>;
> > - interrupt-controller;
> > - #interrupt-cells = <3>;
> > - interrupt-parent = <&gic>;
> > - #clock-cells = <1>;
> > - clock-names = "clkout0", "clkout1", "clkout2", "clkout3",
> > - "clkout4", "clkout8", "clkout9";
> > - clocks = <&clock CLK_OUT_DMC>, <&clock CLK_OUT_TOP>,
> > - <&clock CLK_OUT_LEFTBUS>, <&clock CLK_OUT_RIGHTBUS>,
> > - <&clock CLK_OUT_CPU>, <&clock CLK_XXTI>,
> > - <&clock CLK_XUSBXTI>;
> > -};
> > -
> > -Example of clock consumer :
> > -
> > -usb3503: usb3503@8 {
> > - /* ... */
> > - clock-names = "refclk";
> > - clocks = <&pmu_system_controller 0>;
> > - /* ... */
> > -};
> > diff --git a/Documentation/devicetree/bindings/arm/samsung/pmu.yaml b/Documentation/devicetree/bindings/arm/samsung/pmu.yaml
> > new file mode 100644
> > index 000000000000..a5a02f8237fb
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/arm/samsung/pmu.yaml
> > @@ -0,0 +1,117 @@
> > +# SPDX-License-Identifier: GPL-2.0
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/arm/samsung/pmu.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Samsung Exynos SoC series Power Management Unit (PMU)
> > +
> > +maintainers:
> > + - Krzysztof Kozlowski <krzk@...nel.org>
> > +
> > +properties:
> > + compatible:
> > + items:
> > + - enum:
> > + - samsung,exynos3250-pmu
> > + - samsung,exynos4210-pmu
> > + - samsung,exynos4412-pmu
> > + - samsung,exynos5250-pmu
> > + - samsung,exynos5260-pmu
> > + - samsung,exynos5410-pmu
> > + - samsung,exynos5420-pmu
> > + - samsung,exynos5433-pmu
> > + - samsung,exynos7-pmu
> > + - const: syscon
> > +
> > + reg:
> > + maxItems: 1
> > +
> > + '#clock-cells':
> > + const: 1
> > +
> > + clock-names:
> > + description:
> > + List of clock names for particular CLKOUT mux inputs
> > + minItems: 1
> > + maxItems: 32
> > + items:
> > + enum:
> > + - clkout0
> > + - clkout1
>
> Looking at this again, instead of enum, we can just do:
>
> pattern: '^clkout([0-9]|[12][0-9]|3[0-1])$'
Indeed looks better.
Best regards,
Krzysztof
Powered by blists - more mailing lists