[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20190920083419.5092-1-wen.he_1@nxp.com>
Date: Fri, 20 Sep 2019 16:34:18 +0800
From: Wen He <wen.he_1@....com>
To: linux-devel@...ux.nxdi.nxp.com, Shawn Guo <shawnguo@...nel.org>,
Li Yang <leoyang.li@....com>, Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org
Cc: Wen He <wen.he_1@....com>
Subject: [v2 1/2] arm64: dts: ls1028a: Update the clock providers for the Mali DP500
In order to maximise performance of the LCD Controller's 64-bit AXI
bus, for any give speed bin of the device, the AXI master interface
clock(ACLK) clock can be up to CPU_frequency/2, which is already
capable of optimal performance. In general, ACLK is always expected
to be equal to CPU_frequency/2. APB slave interface clock(PCLK) and
Main processing clock(PCLK) both are tied to the same clock as ACLK.
This change followed the LS1028A Architecture Specification Manual.
Signed-off-by: Wen He <wen.he_1@....com>
---
change in v2:
- add details commit description for this change.
- v1: Link: https://lore.kernel.org/patchwork/patch/1119145/
arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 17 ++---------------
1 file changed, 2 insertions(+), 15 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
index 72b9a75976a1..51fa8f57fdac 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
@@ -86,20 +86,6 @@
clocks = <&osc_27m>;
};
- aclk: clock-axi {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <650000000>;
- clock-output-names= "aclk";
- };
-
- pclk: clock-apb {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <650000000>;
- clock-output-names= "pclk";
- };
-
reboot {
compatible ="syscon-reboot";
regmap = <&dcfg>;
@@ -679,7 +665,8 @@
interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>,
<0 223 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "DE", "SE";
- clocks = <&dpclk 0>, <&aclk>, <&aclk>, <&pclk>;
+ clocks = <&dpclk 0>, <&clockgen 2 2>, <&clockgen 2 2>,
+ <&clockgen 2 2>;
clock-names = "pxlclk", "mclk", "aclk", "pclk";
arm,malidp-output-port-lines = /bits/ 8 <8 8 8>;
arm,malidp-arqos-value = <0xd000d000>;
--
2.17.1
Powered by blists - more mailing lists