linux-kernel - Re: [PATCH v9 08/15] dt: bindings: lp55xx: Be consistent in the document with LED

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <609da7f3-9c6d-ec29-7c5f-38fa9fe01982@ti.com>
Date:   Thu, 26 Sep 2019 07:00:06 -0500
From:   Dan Murphy <dmurphy@...com>
To:     Jacek Anaszewski <jacek.anaszewski@...il.com>, <pavel@....cz>
CC:     <linux-leds@...r.kernel.org>, <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v9 08/15] dt: bindings: lp55xx: Be consistent in the
 document with LED

Jacek

On 9/25/19 4:31 PM, Jacek Anaszewski wrote:
> Dan,
>
> On 9/25/19 7:46 PM, Dan Murphy wrote:
>> Update the document to be consistent in case when using LED.
> s/LED/"LED"/.

ACK


>
>> This should be capital throughout the document.
>>
>> Signed-off-by: Dan Murphy <dmurphy@...com>
>> ---
>>   Documentation/devicetree/bindings/leds/leds-lp55xx.txt | 6 +++---
>>   1 file changed, 3 insertions(+), 3 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/leds/leds-lp55xx.txt b/Documentation/devicetree/bindings/leds/leds-lp55xx.txt
>> index 1b66a413fb9d..bfe2805c5534 100644
>> --- a/Documentation/devicetree/bindings/leds/leds-lp55xx.txt
>> +++ b/Documentation/devicetree/bindings/leds/leds-lp55xx.txt
>> @@ -1,4 +1,4 @@
>> -Binding for TI/National Semiconductor LP55xx Led Drivers
>> +Binding for TI/National Semiconductor LP55xx LED Drivers
>>   
>>   Required properties:
>>   - compatible: one of
>> @@ -12,8 +12,8 @@ Required properties:
>>   - clock-mode: Input clock mode, (0: automode, 1: internal, 2: external)
>>   
>>   Each child has own specific current settings
>> -- led-cur: Current setting at each led channel (mA x10, 0 if led is not connected)
>> -- max-cur: Maximun current at each led channel.
>> +- led-cur: Current setting at each LED channel (mA x10, 0 if LED is not connected)
>> +- max-cur: Maximun current at each LED channel.
>>   
>>   Optional properties:
>>   - enable-gpio: GPIO attached to the chip's enable pin
>>