linux-kernel - Re: [PATCH] tracing/probe: Fix to check the difference of nr

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Sun, 29 Sep 2019 17:14:01 +0900
From:   Masami Hiramatsu <mhiramat@...nel.org>
To:     Steven Rostedt <rostedt@...dmis.org>
Cc:     Srikar Dronamraju <srikar@...ux.vnet.ibm.com>,
        Naveen Rao <naveen.n.rao@...ux.vnet.ibm.com>,
        Ravi Bangoria <ravi.bangoria@...ux.ibm.com>,
        linux-kernel@...r.kernel.org, mingo@...hat.com
Subject: Re: [PATCH] tracing/probe: Fix to check the difference of nr_args
 before adding probe

Hi Steve,

On Sat, 28 Sep 2019 17:11:58 -0400
Steven Rostedt <rostedt@...dmis.org> wrote:

> On Sat, 28 Sep 2019 02:59:08 -0700
> Masami Hiramatsu <mhiramat@...nel.org> wrote:
> 
> > Fix to check the difference of nr_args before adding probe
> > on existing probes. This also may set the error log index
> > bigger than the number of command parameters. In that case
> > it sets the error position is next to the last parameter.
> > 
> > Fixes: ca89bc071d5e ("tracing/kprobe: Add multi-probe per event support")
> > Signed-off-by: Masami Hiramatsu <mhiramat@...nel.org>
> 
> I modified the change log a bit, below is the patch I plan on submitting.
> 
> You OK with this?

Yes, of course. Thank you for updating!

> 
> -- Steve
> 
> 
> From: Masami Hiramatsu <mhiramat@...nel.org>
> Date: Sat, 28 Sep 2019 05:53:29 -0400
> Subject: [PATCH] tracing/probe: Fix to check the difference of nr_args before
>  adding probe
> 
> Steven reported that a test triggered:
> 
> ==================================================================
>  BUG: KASAN: slab-out-of-bounds in trace_kprobe_create+0xa9e/0xe40
>  Read of size 8 at addr ffff8880c4f25a48 by task ftracetest/4798
> 
>  CPU: 2 PID: 4798 Comm: ftracetest Not tainted 5.3.0-rc6-test+ #30
>  Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01 v03.03 07/14/2016
>  Call Trace:
>   dump_stack+0x7c/0xc0
>   ? trace_kprobe_create+0xa9e/0xe40
>   print_address_description+0x6c/0x332
>   ? trace_kprobe_create+0xa9e/0xe40
>   ? trace_kprobe_create+0xa9e/0xe40
>   __kasan_report.cold.6+0x1a/0x3b
>   ? trace_kprobe_create+0xa9e/0xe40
>   kasan_report+0xe/0x12
>   trace_kprobe_create+0xa9e/0xe40
>   ? print_kprobe_event+0x280/0x280
>   ? match_held_lock+0x1b/0x240
>   ? find_held_lock+0xac/0xd0
>   ? fs_reclaim_release.part.112+0x5/0x20
>   ? lock_downgrade+0x350/0x350
>   ? kasan_unpoison_shadow+0x30/0x40
>   ? __kasan_kmalloc.constprop.6+0xc1/0xd0
>   ? trace_kprobe_create+0xe40/0xe40
>   ? trace_kprobe_create+0xe40/0xe40
>   create_or_delete_trace_kprobe+0x2e/0x60
>   trace_run_command+0xc3/0xe0
>   ? trace_panic_handler+0x20/0x20
>   ? kasan_unpoison_shadow+0x30/0x40
>   trace_parse_run_command+0xdc/0x163
>   vfs_write+0xe1/0x240
>   ksys_write+0xba/0x150
>   ? __ia32_sys_read+0x50/0x50
>   ? tracer_hardirqs_on+0x61/0x180
>   ? trace_hardirqs_off_caller+0x43/0x110
>   ? mark_held_locks+0x29/0xa0
>   ? do_syscall_64+0x14/0x260
>   do_syscall_64+0x68/0x260
> 
> Fix to check the difference of nr_args before adding probe
> on existing probes. This also may set the error log index
> bigger than the number of command parameters. In that case
> it sets the error position is next to the last parameter.
> 
> Link: http://lkml.kernel.org/r/156966474783.3478.13217501608215769150.stgit@devnote2
> 
> Fixes: ca89bc071d5e ("tracing/kprobe: Add multi-probe per event support")
> Reported-by: Steven Rostedt (VMware) <rostedt@...dmis.org>
> Signed-off-by: Masami Hiramatsu <mhiramat@...nel.org>
> Signed-off-by: Steven Rostedt (VMware) <rostedt@...dmis.org>
> ---
>  kernel/trace/trace_probe.c | 16 ++++++++++++++++
>  1 file changed, 16 insertions(+)
> 
> diff --git a/kernel/trace/trace_probe.c b/kernel/trace/trace_probe.c
> index baf58a3612c0..905b10af5d5c 100644
> --- a/kernel/trace/trace_probe.c
> +++ b/kernel/trace/trace_probe.c
> @@ -178,6 +178,16 @@ void __trace_probe_log_err(int offset, int err_type)
>  	if (!command)
>  		return;
>  
> +	if (trace_probe_log.index >= trace_probe_log.argc) {
> +		/**
> +		 * Set the error position is next to the last arg + space.
> +		 * Note that len includes the terminal null and the cursor
> +		 * appaers at pos + 1.
> +		 */
> +		pos = len;
> +		offset = 0;
> +	}
> +
>  	/* And make a command string from argv array */
>  	p = command;
>  	for (i = 0; i < trace_probe_log.argc; i++) {
> @@ -1084,6 +1094,12 @@ int trace_probe_compare_arg_type(struct trace_probe *a, struct trace_probe *b)
>  {
>  	int i;
>  
> +	/* In case of more arguments */
> +	if (a->nr_args < b->nr_args)
> +		return a->nr_args + 1;
> +	if (a->nr_args > b->nr_args)
> +		return b->nr_args + 1;
> +
>  	for (i = 0; i < a->nr_args; i++) {
>  		if ((b->nr_args <= i) ||
>  		    ((a->args[i].type != b->args[i].type) ||
> -- 
> 2.20.1
> 


-- 
Masami Hiramatsu <mhiramat@...nel.org>