| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20191002080414.GM896@valkosipuli.retiisi.org.uk>
Date: Wed, 2 Oct 2019 11:04:15 +0300
From: Sakari Ailus <sakari.ailus@....fi>
To: Vishal Sagar <vishal.sagar@...inx.com>
Cc: Hyun Kwon <hyun.kwon@...inx.com>,
Laurent Pinchart <laurent.pinchart@...asonboard.com>,
Mauro Carvalho Chehab <mchehab@...nel.org>,
Michal Simek <michal.simek@...inx.com>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
linux-kernel@...r.kernel.org, linux-media@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org,
Dinesh Kumar <dineshk@...inx.com>,
Sandip Kothari <sandipk@...inx.com>
Subject: Re: [PATCH 2/2] media: v4l: xilinx: Add Xilinx UHD-SDI Rx Subsystem
driver
Hi Vishal,
On Tue, Jun 04, 2019 at 07:25:56PM +0530, Vishal Sagar wrote:
> The Xilinx UHD-SDI Rx subsystem soft IP is used to capture native SDI
> streams from SDI sources like SDI broadcast equipment like cameras and
> mixers. This block outputs either native SDI, native video or
> AXI4-Stream compliant data stream for further processing. Please refer
> to PG290 for details.
>
> The driver is used to configure the IP to add framer, search for
> specific modes, get the detected mode, stream parameters, errors, etc.
> It also generates events for video lock/unlock, bridge over/under flow.
>
> The driver supports only 10 bpc YUV 422 media bus format. It also
> decodes the stream parameters based on the ST352 packet embedded in the
> stream. In case the ST352 packet isn't present in the stream, the core's
> detected properties are used to set stream properties.
>
> The driver currently supports only the AXI4-Stream configuration.
>
> Signed-off-by: Vishal Sagar <vishal.sagar@...inx.com>
> ---
> drivers/media/platform/xilinx/Kconfig | 11 +
> drivers/media/platform/xilinx/Makefile | 1 +
> drivers/media/platform/xilinx/xilinx-sdirxss.c | 1846 ++++++++++++++++++++++++
> include/uapi/linux/xilinx-sdirxss.h | 63 +
> include/uapi/linux/xilinx-v4l2-controls.h | 30 +
> include/uapi/linux/xilinx-v4l2-events.h | 9 +
> 6 files changed, 1960 insertions(+)
> create mode 100644 drivers/media/platform/xilinx/xilinx-sdirxss.c
> create mode 100644 include/uapi/linux/xilinx-sdirxss.h
>
> diff --git a/drivers/media/platform/xilinx/Kconfig b/drivers/media/platform/xilinx/Kconfig
> index cd1a0fd..0c68caa 100644
> --- a/drivers/media/platform/xilinx/Kconfig
> +++ b/drivers/media/platform/xilinx/Kconfig
> @@ -20,6 +20,17 @@ config VIDEO_XILINX_CSI2RXSS
> Bridge. The driver is used to set the number of active lanes and
> get short packet data.
>
> +config VIDEO_XILINX_SDIRXSS
> + tristate "Xilinx UHD SDI Rx Subsystem"
> + help
> + Driver for Xilinx UHD-SDI Rx Subsystem. This is a V4L sub-device
> + based driver that takes input from a SDI source like SDI camera and
> + converts it into an AXI4-Stream. The subsystem comprises of a SMPTE
> + UHD-SDI Rx core, a SDI Rx to Native Video bridge and a Video In to
> + AXI4-Stream bridge. The driver is used to set different stream
> + detection modes and identify stream properties to properly configure
> + downstream.
> +
> config VIDEO_XILINX_TPG
> tristate "Xilinx Video Test Pattern Generator"
> depends on VIDEO_XILINX
> diff --git a/drivers/media/platform/xilinx/Makefile b/drivers/media/platform/xilinx/Makefile
> index 6119a34..223f2ea 100644
> --- a/drivers/media/platform/xilinx/Makefile
> +++ b/drivers/media/platform/xilinx/Makefile
> @@ -4,5 +4,6 @@ xilinx-video-objs += xilinx-dma.o xilinx-vip.o xilinx-vipp.o
>
> obj-$(CONFIG_VIDEO_XILINX) += xilinx-video.o
> obj-$(CONFIG_VIDEO_XILINX_CSI2RXSS) += xilinx-csi2rxss.o
> +obj-$(CONFIG_VIDEO_XILINX_SDIRXSS) += xilinx-sdirxss.o
> obj-$(CONFIG_VIDEO_XILINX_TPG) += xilinx-tpg.o
> obj-$(CONFIG_VIDEO_XILINX_VTC) += xilinx-vtc.o
> diff --git a/drivers/media/platform/xilinx/xilinx-sdirxss.c b/drivers/media/platform/xilinx/xilinx-sdirxss.c
> new file mode 100644
> index 0000000..ba2d9d0
> --- /dev/null
> +++ b/drivers/media/platform/xilinx/xilinx-sdirxss.c
> @@ -0,0 +1,1846 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Driver for Xilinx SDI Rx Subsystem
> + *
> + * Copyright (C) 2017 - 2019 Xilinx, Inc.
> + *
> + * Contacts: Vishal Sagar <vishal.sagar@...inx.com>
> + *
> + */
> +
> +#include <dt-bindings/media/xilinx-vip.h>
> +#include <linux/bitops.h>
> +#include <linux/compiler.h>
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/device.h>
> +#include <linux/interrupt.h>
> +#include <linux/io.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_irq.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm.h>
> +#include <linux/slab.h>
> +#include <linux/spinlock.h>
> +#include <linux/spinlock_types.h>
> +#include <linux/types.h>
> +#include <linux/v4l2-subdev.h>
> +#include <linux/xilinx-sdirxss.h>
> +#include <linux/xilinx-v4l2-events.h>
> +#include <linux/xilinx-v4l2-controls.h>
> +#include <media/media-entity.h>
> +#include <media/v4l2-common.h>
> +#include <media/v4l2-ctrls.h>
> +#include <media/v4l2-event.h>
> +#include <media/v4l2-fwnode.h>
> +#include <media/v4l2-subdev.h>
> +#include "xilinx-vip.h"
> +
> +/*
> + * SDI Rx register map, bitmask and offsets
> + */
> +#define XSDIRX_RST_CTRL_REG 0x00
> +#define XSDIRX_MDL_CTRL_REG 0x04
> +#define XSDIRX_GLBL_IER_REG 0x0C
> +#define XSDIRX_ISR_REG 0x10
> +#define XSDIRX_IER_REG 0x14
> +#define XSDIRX_ST352_VALID_REG 0x18
> +#define XSDIRX_ST352_DS1_REG 0x1C
> +#define XSDIRX_ST352_DS3_REG 0x20
> +#define XSDIRX_ST352_DS5_REG 0x24
> +#define XSDIRX_ST352_DS7_REG 0x28
> +#define XSDIRX_ST352_DS9_REG 0x2C
> +#define XSDIRX_ST352_DS11_REG 0x30
> +#define XSDIRX_ST352_DS13_REG 0x34
> +#define XSDIRX_ST352_DS15_REG 0x38
> +#define XSDIRX_VERSION_REG 0x3C
> +#define XSDIRX_SS_CONFIG_REG 0x40
> +#define XSDIRX_MODE_DET_STAT_REG 0x44
> +#define XSDIRX_TS_DET_STAT_REG 0x48
> +#define XSDIRX_EDH_STAT_REG 0x4C
> +#define XSDIRX_EDH_ERRCNT_EN_REG 0x50
> +#define XSDIRX_EDH_ERRCNT_REG 0x54
> +#define XSDIRX_CRC_ERRCNT_REG 0x58
> +#define XSDIRX_VID_LOCK_WINDOW_REG 0x5C
> +#define XSDIRX_SB_RX_STS_REG 0x60
> +
> +#define XSDIRX_RST_CTRL_SS_EN_MASK BIT(0)
> +#define XSDIRX_RST_CTRL_SRST_MASK BIT(1)
> +#define XSDIRX_RST_CTRL_RST_CRC_ERRCNT_MASK BIT(2)
> +#define XSDIRX_RST_CTRL_RST_EDH_ERRCNT_MASK BIT(3)
> +#define XSDIRX_RST_CTRL_SDIRX_BRIDGE_ENB_MASK BIT(8)
> +#define XSDIRX_RST_CTRL_VIDIN_AXI4S_MOD_ENB_MASK BIT(9)
> +
> +#define XSDIRX_MDL_CTRL_FRM_EN_MASK BIT(4)
> +#define XSDIRX_MDL_CTRL_MODE_DET_EN_MASK BIT(5)
> +#define XSDIRX_MDL_CTRL_MODE_HD_EN_MASK BIT(8)
> +#define XSDIRX_MDL_CTRL_MODE_SD_EN_MASK BIT(9)
> +#define XSDIRX_MDL_CTRL_MODE_3G_EN_MASK BIT(10)
> +#define XSDIRX_MDL_CTRL_MODE_6G_EN_MASK BIT(11)
> +#define XSDIRX_MDL_CTRL_MODE_12GI_EN_MASK BIT(12)
> +#define XSDIRX_MDL_CTRL_MODE_12GF_EN_MASK BIT(13)
> +#define XSDIRX_MDL_CTRL_MODE_AUTO_DET_MASK GENMASK(13, 8)
> +
> +#define XSDIRX_MDL_CTRL_FORCED_MODE_OFFSET 16
> +#define XSDIRX_MDL_CTRL_FORCED_MODE_MASK GENMASK(18, 16)
> +
> +#define XSDIRX_GLBL_INTR_EN_MASK BIT(0)
> +
> +#define XSDIRX_INTR_VIDLOCK_MASK BIT(0)
> +#define XSDIRX_INTR_VIDUNLOCK_MASK BIT(1)
> +#define XSDIRX_INTR_OVERFLOW_MASK BIT(9)
> +#define XSDIRX_INTR_UNDERFLOW_MASK BIT(10)
> +
> +#define XSDIRX_INTR_ALL_MASK (XSDIRX_INTR_VIDLOCK_MASK |\
> + XSDIRX_INTR_VIDUNLOCK_MASK |\
> + XSDIRX_INTR_OVERFLOW_MASK |\
> + XSDIRX_INTR_UNDERFLOW_MASK)
> +
> +#define XSDIRX_ST352_VALID_DS1_MASK BIT(0)
> +#define XSDIRX_ST352_VALID_DS3_MASK BIT(1)
> +#define XSDIRX_ST352_VALID_DS5_MASK BIT(2)
> +#define XSDIRX_ST352_VALID_DS7_MASK BIT(3)
> +#define XSDIRX_ST352_VALID_DS9_MASK BIT(4)
> +#define XSDIRX_ST352_VALID_DS11_MASK BIT(5)
> +#define XSDIRX_ST352_VALID_DS13_MASK BIT(6)
> +#define XSDIRX_ST352_VALID_DS15_MASK BIT(7)
> +
> +#define XSDIRX_MODE_DET_STAT_RX_MODE_MASK GENMASK(2, 0)
> +#define XSDIRX_MODE_DET_STAT_MODE_LOCK_MASK BIT(3)
> +#define XSDIRX_MODE_DET_STAT_ACT_STREAM_MASK GENMASK(6, 4)
> +#define XSDIRX_MODE_DET_STAT_ACT_STREAM_OFFSET 4
> +#define XSDIRX_MODE_DET_STAT_LVLB_3G_MASK BIT(7)
> +
> +#define XSDIRX_ACTIVE_STREAMS_1 0x0
> +#define XSDIRX_ACTIVE_STREAMS_2 0x1
> +#define XSDIRX_ACTIVE_STREAMS_4 0x2
> +#define XSDIRX_ACTIVE_STREAMS_8 0x3
> +#define XSDIRX_ACTIVE_STREAMS_16 0x4
> +
> +#define XSDIRX_TS_DET_STAT_LOCKED_MASK BIT(0)
> +#define XSDIRX_TS_DET_STAT_SCAN_MASK BIT(1)
> +#define XSDIRX_TS_DET_STAT_SCAN_OFFSET (1)
> +#define XSDIRX_TS_DET_STAT_FAMILY_MASK GENMASK(7, 4)
> +#define XSDIRX_TS_DET_STAT_FAMILY_OFFSET (4)
> +#define XSDIRX_TS_DET_STAT_RATE_MASK GENMASK(11, 8)
> +#define XSDIRX_TS_DET_STAT_RATE_OFFSET (8)
> +
> +#define XSDIRX_TS_DET_STAT_RATE_NONE 0x0
> +#define XSDIRX_TS_DET_STAT_RATE_23_98HZ 0x2
> +#define XSDIRX_TS_DET_STAT_RATE_24HZ 0x3
> +#define XSDIRX_TS_DET_STAT_RATE_47_95HZ 0x4
> +#define XSDIRX_TS_DET_STAT_RATE_25HZ 0x5
> +#define XSDIRX_TS_DET_STAT_RATE_29_97HZ 0x6
> +#define XSDIRX_TS_DET_STAT_RATE_30HZ 0x7
> +#define XSDIRX_TS_DET_STAT_RATE_48HZ 0x8
> +#define XSDIRX_TS_DET_STAT_RATE_50HZ 0x9
> +#define XSDIRX_TS_DET_STAT_RATE_59_94HZ 0xA
> +#define XSDIRX_TS_DET_STAT_RATE_60HZ 0xB
> +
> +#define XSDIRX_EDH_STAT_EDH_AP_MASK BIT(0)
> +#define XSDIRX_EDH_STAT_EDH_FF_MASK BIT(1)
> +#define XSDIRX_EDH_STAT_EDH_ANC_MASK BIT(2)
> +#define XSDIRX_EDH_STAT_AP_FLAG_MASK GENMASK(8, 4)
> +#define XSDIRX_EDH_STAT_FF_FLAG_MASK GENMASK(13, 9)
> +#define XSDIRX_EDH_STAT_ANC_FLAG_MASK GENMASK(18, 14)
> +#define XSDIRX_EDH_STAT_PKT_FLAG_MASK GENMASK(22, 19)
> +
> +#define XSDIRX_EDH_ERRCNT_COUNT_MASK GENMASK(15, 0)
> +
> +#define XSDIRX_CRC_ERRCNT_COUNT_MASK GENMASK(31, 16)
> +#define XSDIRX_CRC_ERRCNT_DS_CRC_MASK GENMASK(15, 0)
> +
> +#define XSDIRX_VERSION_REV_MASK GENMASK(7, 0)
> +#define XSDIRX_VERSION_PATCHID_MASK GENMASK(11, 8)
> +#define XSDIRX_VERSION_VER_REV_MASK GENMASK(15, 12)
> +#define XSDIRX_VERSION_VER_MIN_MASK GENMASK(23, 16)
> +#define XSDIRX_VERSION_VER_MAJ_MASK GENMASK(31, 24)
> +
> +#define XSDIRX_SS_CONFIG_EDH_INCLUDED_MASK BIT(1)
> +
> +#define XSDIRX_STAT_SB_RX_TDATA_CHANGE_DONE_MASK BIT(0)
> +#define XSDIRX_STAT_SB_RX_TDATA_CHANGE_FAIL_MASK BIT(1)
> +#define XSDIRX_STAT_SB_RX_TDATA_GT_RESETDONE_MASK BIT(2)
> +#define XSDIRX_STAT_SB_RX_TDATA_GT_BITRATE_MASK BIT(3)
> +
> +/* Number of media pads */
> +#define XSDIRX_MEDIA_PADS (1)
> +
> +#define XSDIRX_DEFAULT_WIDTH (1920)
> +#define XSDIRX_DEFAULT_HEIGHT (1080)
> +
> +#define XSDIRX_MAX_STR_LENGTH 16
> +
> +#define XSDIRXSS_SDI_STD_3G 0
> +#define XSDIRXSS_SDI_STD_6G 1
> +#define XSDIRXSS_SDI_STD_12G_8DS 2
> +
> +#define XSDIRX_DEFAULT_VIDEO_LOCK_WINDOW 0x3000
> +
> +#define XSDIRX_MODE_HD_MASK 0x0
> +#define XSDIRX_MODE_SD_MASK 0x1
> +#define XSDIRX_MODE_3G_MASK 0x2
> +#define XSDIRX_MODE_6G_MASK 0x4
> +#define XSDIRX_MODE_12GI_MASK 0x5
> +#define XSDIRX_MODE_12GF_MASK 0x6
> +
> +/*
> + * Maximum number of events per file handle.
> + */
> +#define XSDIRX_MAX_EVENTS (128)
> +
> +/* ST352 related macros */
> +#define XST352_PAYLOAD_BYTE_MASK 0xFF
> +#define XST352_PAYLOAD_BYTE1_SHIFT 0
> +#define XST352_PAYLOAD_BYTE2_SHIFT 8
> +#define XST352_PAYLOAD_BYTE3_SHIFT 16
> +#define XST352_PAYLOAD_BYTE4_SHIFT 24
> +
> +#define XST352_BYTE1_ST292_1x720L_1_5G 0x84
> +#define XST352_BYTE1_ST292_1x1080L_1_5G 0x85
> +#define XST352_BYTE1_ST425_2008_750L_3GB 0x88
> +#define XST352_BYTE1_ST425_2008_1125L_3GA 0x89
> +#define XST352_BYTE1_ST372_DL_3GB 0x8A
> +#define XST352_BYTE1_ST372_2x720L_3GB 0x8B
> +#define XST352_BYTE1_ST372_2x1080L_3GB 0x8C
> +#define XST352_BYTE1_ST2081_10_2160L_6G 0xC0
> +#define XST352_BYTE1_ST2081_10_DL_2160L_6G 0xC2
> +#define XST352_BYTE1_ST2082_10_2160L_12G 0xCE
> +
> +#define XST352_BYTE2_TS_TYPE_MASK BIT(15)
> +#define XST352_BYTE2_TS_TYPE_OFFSET 15
> +#define XST352_BYTE2_PIC_TYPE_MASK BIT(14)
> +#define XST352_BYTE2_PIC_TYPE_OFFSET 14
> +#define XST352_BYTE2_TS_PIC_TYPE_INTERLACED 0
> +#define XST352_BYTE2_TS_PIC_TYPE_PROGRESSIVE 1
> +
> +#define XST352_BYTE2_FPS_MASK 0xF
> +#define XST352_BYTE2_FPS_SHIFT 8
> +#define XST352_BYTE2_FPS_24F 0x2
> +#define XST352_BYTE2_FPS_24 0x3
> +#define XST352_BYTE2_FPS_48F 0x4
> +#define XST352_BYTE2_FPS_25 0x5
> +#define XST352_BYTE2_FPS_30F 0x6
> +#define XST352_BYTE2_FPS_30 0x7
> +#define XST352_BYTE2_FPS_48 0x8
> +#define XST352_BYTE2_FPS_50 0x9
> +#define XST352_BYTE2_FPS_60F 0xA
> +#define XST352_BYTE2_FPS_60 0xB
> +/* Table 4 ST 2081-10:2015 */
> +#define XST352_BYTE2_FPS_96 0xC
> +#define XST352_BYTE2_FPS_100 0xD
> +#define XST352_BYTE2_FPS_120 0xE
> +#define XST352_BYTE2_FPS_120F 0xF
> +
> +#define XST352_BYTE3_ACT_LUMA_COUNT_MASK BIT(22)
> +#define XST352_BYTE3_ACT_LUMA_COUNT_OFFSET 22
> +
> +#define XST352_BYTE3_COLOR_FORMAT_MASK GENMASK(19, 16)
> +#define XST352_BYTE3_COLOR_FORMAT_OFFSET 16
> +#define XST352_BYTE3_COLOR_FORMAT_422 0x0
> +#define XST352_BYTE3_COLOR_FORMAT_420 0x3
> +
> +/**
> + * enum sdi_family_enc - SDI Transport Video Format Detected with Active Pixels
> + * @XSDIRX_SMPTE_ST_274: SMPTE ST 274 detected with AP 1920x1080
> + * @XSDIRX_SMPTE_ST_296: SMPTE ST 296 detected with AP 1280x720
> + * @XSDIRX_SMPTE_ST_2048_2: SMPTE ST 2048-2 detected with AP 2048x1080
> + * @XSDIRX_SMPTE_ST_295: SMPTE ST 295 detected with AP 1920x1080
> + * @XSDIRX_NTSC: NTSC encoding detected with AP 720x486
> + * @XSDIRX_PAL: PAL encoding detected with AP 720x576
> + * @XSDIRX_TS_UNKNOWN: Unknown SMPTE Transport family type
> + */
> +enum sdi_family_enc {
> + XSDIRX_SMPTE_ST_274 = 0,
> + XSDIRX_SMPTE_ST_296 = 1,
> + XSDIRX_SMPTE_ST_2048_2 = 2,
> + XSDIRX_SMPTE_ST_295 = 3,
> + XSDIRX_NTSC = 8,
> + XSDIRX_PAL = 9,
> + XSDIRX_TS_UNKNOWN = 15
> +};
> +
> +/**
> + * struct xsdirxss_core - Core configuration SDI Rx Subsystem device structure
> + * @dev: Platform structure
> + * @iomem: Base address of subsystem
> + * @irq: requested irq number
> + * @include_edh: EDH processor presence
> + * @mode: 3G/6G/12G mode
> + * @axi_clk: Axi lite interface clock
> + * @sdirx_clk: SDI Rx GT clock
> + * @vidout_clk: Video clock
> + */
> +struct xsdirxss_core {
> + struct device *dev;
> + void __iomem *iomem;
> + int irq;
> + bool include_edh;
> + int mode;
> + struct clk *axi_clk;
> + struct clk *sdirx_clk;
> + struct clk *vidout_clk;
> +};
> +
> +/**
> + * struct xsdirxss_state - SDI Rx Subsystem device structure
> + * @core: Core structure for MIPI SDI Rx Subsystem
> + * @subdev: The v4l2 subdev structure
> + * @ctrl_handler: control handler
> + * @event: Holds the video unlock event
> + * @formats: Active V4L2 formats on each pad
> + * @default_format: default V4L2 media bus format
> + * @frame_interval: Captures the frame rate
> + * @vip_format: format information corresponding to the active format
> + * @pads: media pads
> + * @streaming: Flag for storing streaming state
> + * @vidlocked: Flag indicating SDI Rx has locked onto video stream
> + * @ts_is_interlaced: Flag indicating Transport Stream is interlaced.
> + *
> + * This structure contains the device driver related parameters
> + */
> +struct xsdirxss_state {
> + struct xsdirxss_core core;
> + struct v4l2_subdev subdev;
> + struct v4l2_ctrl_handler ctrl_handler;
> + struct v4l2_event event;
> + struct v4l2_mbus_framefmt formats[XSDIRX_MEDIA_PADS];
> + struct v4l2_mbus_framefmt default_format;
> + struct v4l2_fract frame_interval;
> + const struct xvip_video_format *vip_format;
> + struct media_pad pads[XSDIRX_MEDIA_PADS];
> + bool streaming;
> + bool vidlocked;
> + bool ts_is_interlaced;
> +};
> +
> +static inline struct xsdirxss_state *
> +to_xsdirxssstate(struct v4l2_subdev *subdev)
> +{
> + return container_of(subdev, struct xsdirxss_state, subdev);
> +}
> +
> +/*
> + * Register related operations
> + */
> +static inline u32 xsdirxss_read(struct xsdirxss_core *xsdirxss, u32 addr)
> +{
> + return ioread32(xsdirxss->iomem + addr);
> +}
> +
> +static inline void xsdirxss_write(struct xsdirxss_core *xsdirxss, u32 addr,
> + u32 value)
> +{
> + iowrite32(value, xsdirxss->iomem + addr);
> +}
> +
> +static inline void xsdirxss_clr(struct xsdirxss_core *xsdirxss, u32 addr,
> + u32 clr)
> +{
> + xsdirxss_write(xsdirxss, addr, xsdirxss_read(xsdirxss, addr) & ~clr);
> +}
> +
> +static inline void xsdirxss_set(struct xsdirxss_core *xsdirxss, u32 addr,
> + u32 set)
> +{
> + xsdirxss_write(xsdirxss, addr, xsdirxss_read(xsdirxss, addr) | set);
> +}
> +
> +static void xsdirx_core_disable(struct xsdirxss_core *core)
> +{
> + xsdirxss_clr(core, XSDIRX_RST_CTRL_REG, XSDIRX_RST_CTRL_SS_EN_MASK);
> +}
> +
> +static void xsdirx_core_enable(struct xsdirxss_core *core)
> +{
> + xsdirxss_set(core, XSDIRX_RST_CTRL_REG, XSDIRX_RST_CTRL_SS_EN_MASK);
> +}
> +
> +static int xsdirx_set_modedetect(struct xsdirxss_core *core, u16 mask)
> +{
> + u32 i, val;
> +
> + mask &= XSDIRX_DETECT_ALL_MODES;
> + if (!mask) {
> + dev_err(core->dev, "Invalid bit mask = 0x%08x\n", mask);
> + return -EINVAL;
> + }
> +
> + dev_dbg(core->dev, "mask = 0x%x\n", mask);
> +
> + val = xsdirxss_read(core, XSDIRX_MDL_CTRL_REG);
> + val &= ~(XSDIRX_MDL_CTRL_MODE_DET_EN_MASK);
> + val &= ~(XSDIRX_MDL_CTRL_MODE_AUTO_DET_MASK);
> + val &= ~(XSDIRX_MDL_CTRL_FORCED_MODE_MASK);
> +
> + if (hweight16(mask) > 1) {
> + /* Multi mode detection as more than 1 bit set in mask */
> + dev_dbg(core->dev, "Detect multiple modes\n");
> + for (i = 0; i < XSDIRX_MODE_NUM_SUPPORTED; i++) {
> + switch (mask & (1 << i)) {
> + case BIT(XSDIRX_MODE_SD_OFFSET):
There's no really a need for the loop.
> + val |= XSDIRX_MDL_CTRL_MODE_SD_EN_MASK;
> + break;
> + case BIT(XSDIRX_MODE_HD_OFFSET):
> + val |= XSDIRX_MDL_CTRL_MODE_HD_EN_MASK;
> + break;
> + case BIT(XSDIRX_MODE_3G_OFFSET):
> + val |= XSDIRX_MDL_CTRL_MODE_3G_EN_MASK;
> + break;
> + case BIT(XSDIRX_MODE_6G_OFFSET):
> + val |= XSDIRX_MDL_CTRL_MODE_6G_EN_MASK;
> + break;
> + case BIT(XSDIRX_MODE_12GI_OFFSET):
> + val |= XSDIRX_MDL_CTRL_MODE_12GI_EN_MASK;
> + break;
> + case BIT(XSDIRX_MODE_12GF_OFFSET):
> + val |= XSDIRX_MDL_CTRL_MODE_12GF_EN_MASK;
> + break;
> + }
> + }
> + val |= XSDIRX_MDL_CTRL_MODE_DET_EN_MASK;
> + } else {
> + /* Fixed Mode */
> + u32 forced_mode_mask = 0;
> +
> + dev_dbg(core->dev, "Detect fixed mode\n");
> +
> + /* Find offset of first bit set */
> + switch (__ffs(mask)) {
> + case XSDIRX_MODE_SD_OFFSET:
> + forced_mode_mask = XSDIRX_MODE_SD_MASK;
> + break;
> + case XSDIRX_MODE_HD_OFFSET:
> + forced_mode_mask = XSDIRX_MODE_HD_MASK;
> + break;
> + case XSDIRX_MODE_3G_OFFSET:
> + forced_mode_mask = XSDIRX_MODE_3G_MASK;
> + break;
> + case XSDIRX_MODE_6G_OFFSET:
> + forced_mode_mask = XSDIRX_MODE_6G_MASK;
> + break;
> + case XSDIRX_MODE_12GI_OFFSET:
> + forced_mode_mask = XSDIRX_MODE_12GI_MASK;
> + break;
> + case XSDIRX_MODE_12GF_OFFSET:
> + forced_mode_mask = XSDIRX_MODE_12GF_MASK;
> + break;
> + }
> + dev_dbg(core->dev, "Forced Mode Mask : 0x%x\n",
> + forced_mode_mask);
> + val |= forced_mode_mask << XSDIRX_MDL_CTRL_FORCED_MODE_OFFSET;
> + }
> +
> + dev_dbg(core->dev, "Modes to be detected : sdi ctrl reg = 0x%08x\n",
> + val);
> + xsdirxss_write(core, XSDIRX_MDL_CTRL_REG, val);
> +
> + return 0;
> +}
> +
> +static void xsdirx_framer(struct xsdirxss_core *core, bool flag)
> +{
> + if (flag)
> + xsdirxss_set(core, XSDIRX_MDL_CTRL_REG,
> + XSDIRX_MDL_CTRL_FRM_EN_MASK);
> + else
> + xsdirxss_clr(core, XSDIRX_MDL_CTRL_REG,
> + XSDIRX_MDL_CTRL_FRM_EN_MASK);
> +}
> +
> +static void xsdirx_setedherrcnttrigger(struct xsdirxss_core *core, u32 enable)
> +{
> + u32 val = xsdirxss_read(core, XSDIRX_EDH_ERRCNT_EN_REG);
> +
> + val = enable & XSDIRX_EDH_ALLERR_MASK;
> +
> + xsdirxss_write(core, XSDIRX_EDH_ERRCNT_EN_REG, val);
> +}
> +
> +static void xsdirx_setvidlockwindow(struct xsdirxss_core *core, u32 val)
> +{
> + /*
> + * The video lock window is the amount of time for which the
> + * the mode and transport stream should be locked to get the
> + * video lock interrupt.
> + */
> + xsdirxss_write(core, XSDIRX_VID_LOCK_WINDOW_REG, val);
> +}
> +
> +static void xsdirx_disableintr(struct xsdirxss_core *core, u32 mask)
> +{
> + xsdirxss_clr(core, XSDIRX_IER_REG, mask);
> +}
> +
> +static void xsdirx_enableintr(struct xsdirxss_core *core, u32 mask)
> +{
> + xsdirxss_set(core, XSDIRX_IER_REG, mask);
> +}
> +
> +static void xsdirx_globalintr(struct xsdirxss_core *core, bool flag)
> +{
> + if (flag)
> + xsdirxss_set(core, XSDIRX_GLBL_IER_REG,
> + XSDIRX_GLBL_INTR_EN_MASK);
> + else
> + xsdirxss_clr(core, XSDIRX_GLBL_IER_REG,
> + XSDIRX_GLBL_INTR_EN_MASK);
> +}
> +
> +static void xsdirx_clearintr(struct xsdirxss_core *core, u32 mask)
> +{
> + xsdirxss_set(core, XSDIRX_ISR_REG, mask);
> +}
> +
> +static void xsdirx_vid_bridge_control(struct xsdirxss_core *core, bool enable)
> +{
> + if (enable)
> + xsdirxss_set(core, XSDIRX_RST_CTRL_REG,
> + XSDIRX_RST_CTRL_SDIRX_BRIDGE_ENB_MASK);
> + else
> + xsdirxss_clr(core, XSDIRX_RST_CTRL_REG,
> + XSDIRX_RST_CTRL_SDIRX_BRIDGE_ENB_MASK);
> +}
> +
> +static void xsdirx_axis4_bridge_control(struct xsdirxss_core *core, bool enable)
> +{
> + if (enable)
> + xsdirxss_set(core, XSDIRX_RST_CTRL_REG,
> + XSDIRX_RST_CTRL_VIDIN_AXI4S_MOD_ENB_MASK);
> + else
> + xsdirxss_clr(core, XSDIRX_RST_CTRL_REG,
> + XSDIRX_RST_CTRL_VIDIN_AXI4S_MOD_ENB_MASK);
> +}
> +
> +static void xsdirx_streamflow_control(struct xsdirxss_core *core, bool enable)
> +{
> + /* The sdi to native bridge is followed by native to axis4 bridge */
> + if (enable) {
> + xsdirx_axis4_bridge_control(core, enable);
> + xsdirx_vid_bridge_control(core, enable);
> + } else {
> + xsdirx_vid_bridge_control(core, enable);
> + xsdirx_axis4_bridge_control(core, enable);
> + }
> +}
> +
> +static void xsdirx_streamdowncb(struct xsdirxss_core *core)
> +{
> + xsdirx_streamflow_control(core, false);
> +}
> +
> +static void xsdirxss_get_framerate(struct v4l2_fract *frame_interval,
> + u32 framerate)
> +{
> + switch (framerate) {
> + case XSDIRX_TS_DET_STAT_RATE_23_98HZ:
> + frame_interval->numerator = 1001;
> + frame_interval->denominator = 24000;
> + break;
> + case XSDIRX_TS_DET_STAT_RATE_24HZ:
> + frame_interval->numerator = 1000;
> + frame_interval->denominator = 24000;
> + break;
> + case XSDIRX_TS_DET_STAT_RATE_25HZ:
> + frame_interval->numerator = 1000;
> + frame_interval->denominator = 25000;
> + break;
> + case XSDIRX_TS_DET_STAT_RATE_29_97HZ:
> + frame_interval->numerator = 1001;
> + frame_interval->denominator = 30000;
> + break;
> + case XSDIRX_TS_DET_STAT_RATE_30HZ:
> + frame_interval->numerator = 1000;
> + frame_interval->denominator = 30000;
> + break;
> + case XSDIRX_TS_DET_STAT_RATE_47_95HZ:
> + frame_interval->numerator = 1001;
> + frame_interval->denominator = 48000;
> + break;
> + case XSDIRX_TS_DET_STAT_RATE_48HZ:
> + frame_interval->numerator = 1000;
> + frame_interval->denominator = 48000;
> + break;
> + case XSDIRX_TS_DET_STAT_RATE_50HZ:
> + frame_interval->numerator = 1000;
> + frame_interval->denominator = 50000;
> + break;
> + case XSDIRX_TS_DET_STAT_RATE_59_94HZ:
> + frame_interval->numerator = 1001;
> + frame_interval->denominator = 60000;
> + break;
> + case XSDIRX_TS_DET_STAT_RATE_60HZ:
> + frame_interval->numerator = 1000;
> + frame_interval->denominator = 60000;
> + break;
> + default:
> + frame_interval->numerator = 1;
> + frame_interval->denominator = 1;
> + }
> +}
> +
> +/**
> + * xsdirx_get_stream_properties - Get SDI Rx stream properties
> + * @state: pointer to driver state
> + *
> + * This function decodes the stream's ST352 payload (if available) to get
> + * stream properties like width, height, picture type (interlaced/progressive),
> + * etc.
> + *
> + * Return: 0 for success else errors
> + */
> +static int xsdirx_get_stream_properties(struct xsdirxss_state *state)
> +{
> + struct xsdirxss_core *core = &state->core;
> + u32 mode, payload = 0, val, family, valid, tscan;
> + u8 byte1 = 0, active_luma = 0, pic_type = 0, framerate = 0;
> + u8 sampling = XST352_BYTE3_COLOR_FORMAT_422;
> + struct v4l2_mbus_framefmt *format = &state->formats[0];
> +
> + mode = xsdirxss_read(core, XSDIRX_MODE_DET_STAT_REG);
> + mode &= XSDIRX_MODE_DET_STAT_RX_MODE_MASK;
> +
> + valid = xsdirxss_read(core, XSDIRX_ST352_VALID_REG);
> +
> + if (mode >= XSDIRX_MODE_3G_MASK && !valid) {
> + dev_err(core->dev, "No valid ST352 payload present even for 3G mode and above\n");
> + return -EINVAL;
> + }
> +
> + val = xsdirxss_read(core, XSDIRX_TS_DET_STAT_REG);
> + if (valid & XSDIRX_ST352_VALID_DS1_MASK) {
> + payload = xsdirxss_read(core, XSDIRX_ST352_DS1_REG);
> + byte1 = (payload >> XST352_PAYLOAD_BYTE1_SHIFT) &
> + XST352_PAYLOAD_BYTE_MASK;
> + active_luma = (payload & XST352_BYTE3_ACT_LUMA_COUNT_MASK) >>
> + XST352_BYTE3_ACT_LUMA_COUNT_OFFSET;
> + pic_type = (payload & XST352_BYTE2_PIC_TYPE_MASK) >>
> + XST352_BYTE2_PIC_TYPE_OFFSET;
> + framerate = (payload >> XST352_BYTE2_FPS_SHIFT) &
> + XST352_BYTE2_FPS_MASK;
> + tscan = (payload & XST352_BYTE2_TS_TYPE_MASK) >>
> + XST352_BYTE2_TS_TYPE_OFFSET;
> + sampling = (payload & XST352_BYTE3_COLOR_FORMAT_MASK) >>
> + XST352_BYTE3_COLOR_FORMAT_OFFSET;
> + } else {
> + dev_dbg(core->dev, "No ST352 payload available : Mode = %d\n",
> + mode);
> + framerate = (val & XSDIRX_TS_DET_STAT_RATE_MASK) >>
> + XSDIRX_TS_DET_STAT_RATE_OFFSET;
> + tscan = (val & XSDIRX_TS_DET_STAT_SCAN_MASK) >>
> + XSDIRX_TS_DET_STAT_SCAN_OFFSET;
> + }
> +
> + family = (val & XSDIRX_TS_DET_STAT_FAMILY_MASK) >>
> + XSDIRX_TS_DET_STAT_FAMILY_OFFSET;
> + state->ts_is_interlaced = tscan ? false : true;
> +
> + dev_dbg(core->dev, "ts_is_interlaced = %d, family = %d\n",
> + state->ts_is_interlaced, family);
> +
> + switch (mode) {
> + case XSDIRX_MODE_HD_MASK:
> + if (!valid) {
> + /* No payload obtained */
> + dev_dbg(core->dev, "frame rate : %d, tscan = %d\n",
> + framerate, tscan);
> + /*
> + * NOTE : A progressive segmented frame pSF will be
> + * reported incorrectly as Interlaced as we rely on IP's
> + * transport scan locked bit.
> + */
> + dev_warn(core->dev, "pSF will be incorrectly reported as Interlaced\n");
> +
> + switch (framerate) {
> + case XSDIRX_TS_DET_STAT_RATE_23_98HZ:
> + case XSDIRX_TS_DET_STAT_RATE_24HZ:
> + case XSDIRX_TS_DET_STAT_RATE_25HZ:
> + case XSDIRX_TS_DET_STAT_RATE_29_97HZ:
> + case XSDIRX_TS_DET_STAT_RATE_30HZ:
> + if (family == XSDIRX_SMPTE_ST_296) {
> + format->width = 1280;
> + format->height = 720;
> + format->field = V4L2_FIELD_NONE;
> + } else if (family == XSDIRX_SMPTE_ST_2048_2) {
> + format->width = 2048;
> + format->height = 1080;
> + if (tscan)
> + format->field = V4L2_FIELD_NONE;
> + else
> + format->field =
> + V4L2_FIELD_ALTERNATE;
> + } else {
> + format->width = 1920;
> + format->height = 1080;
> + if (tscan)
> + format->field = V4L2_FIELD_NONE;
> + else
> + format->field =
> + V4L2_FIELD_ALTERNATE;
> + }
> + break;
> + case XSDIRX_TS_DET_STAT_RATE_50HZ:
> + case XSDIRX_TS_DET_STAT_RATE_59_94HZ:
> + case XSDIRX_TS_DET_STAT_RATE_60HZ:
> + if (family == XSDIRX_SMPTE_ST_274) {
> + format->width = 1920;
> + format->height = 1080;
> + } else {
> + format->width = 1280;
> + format->height = 720;
> + }
> + format->field = V4L2_FIELD_NONE;
> + break;
> + default:
> + format->width = 1920;
> + format->height = 1080;
> + format->field = V4L2_FIELD_NONE;
> + }
> + } else {
> + dev_dbg(core->dev, "Got the payload\n");
> + switch (byte1) {
> + case XST352_BYTE1_ST292_1x720L_1_5G:
> + /* SMPTE ST 292-1 for 720 line payloads */
> + format->width = 1280;
> + format->height = 720;
> + break;
> + case XST352_BYTE1_ST292_1x1080L_1_5G:
> + /* SMPTE ST 292-1 for 1080 line payloads */
> + format->height = 1080;
> + if (active_luma)
> + format->width = 2048;
> + else
> + format->width = 1920;
> + break;
> + default:
> + dev_dbg(core->dev, "Unknown HD Mode SMPTE standard\n");
> + return -EINVAL;
> + }
> + }
> + break;
> + case XSDIRX_MODE_SD_MASK:
> + format->field = V4L2_FIELD_ALTERNATE;
> +
> + switch (family) {
> + case XSDIRX_NTSC:
> + format->width = 720;
> + format->height = 486;
> + break;
> + case XSDIRX_PAL:
> + format->width = 720;
> + format->height = 576;
> + break;
> + default:
> + dev_dbg(core->dev, "Unknown SD Mode SMPTE standard\n");
> + return -EINVAL;
> + }
> + break;
> + case XSDIRX_MODE_3G_MASK:
> + switch (byte1) {
> + case XST352_BYTE1_ST425_2008_750L_3GB:
> + /* Sec 4.1.6.1 SMPTE 425-2008 */
> + case XST352_BYTE1_ST372_2x720L_3GB:
> + /* Table 13 SMPTE 425-2008 */
> + format->width = 1280;
> + format->height = 720;
> + break;
> + case XST352_BYTE1_ST425_2008_1125L_3GA:
> + /* ST352 Table SMPTE 425-1 */
> + case XST352_BYTE1_ST372_DL_3GB:
> + /* Table 13 SMPTE 425-2008 */
> + case XST352_BYTE1_ST372_2x1080L_3GB:
> + /* Table 13 SMPTE 425-2008 */
> + format->height = 1080;
> + if (active_luma)
> + format->width = 2048;
> + else
> + format->width = 1920;
> + break;
> + default:
> + dev_dbg(core->dev, "Unknown 3G Mode SMPTE standard\n");
> + return -EINVAL;
> + }
> + break;
> + case XSDIRX_MODE_6G_MASK:
> + switch (byte1) {
> + case XST352_BYTE1_ST2081_10_DL_2160L_6G:
> + /* Dual link 6G */
> + case XST352_BYTE1_ST2081_10_2160L_6G:
> + /* Table 3 SMPTE ST 2081-10 */
> + format->height = 2160;
> + if (active_luma)
> + format->width = 4096;
> + else
> + format->width = 3840;
> + break;
> + default:
> + dev_dbg(core->dev, "Unknown 6G Mode SMPTE standard\n");
> + return -EINVAL;
> + }
> + break;
> + case XSDIRX_MODE_12GI_MASK:
> + case XSDIRX_MODE_12GF_MASK:
> + switch (byte1) {
> + case XST352_BYTE1_ST2082_10_2160L_12G:
> + /* Section 4.3.1 SMPTE ST 2082-10 */
> + format->height = 2160;
> + if (active_luma)
> + format->width = 4096;
> + else
> + format->width = 3840;
> + break;
> + default:
> + dev_dbg(core->dev, "Unknown 12G Mode SMPTE standard\n");
> + return -EINVAL;
> + }
> + break;
> + default:
> + dev_err(core->dev, "Invalid Mode\n");
> + return -EINVAL;
> + }
> +
> + if (valid) {
> + if (pic_type)
> + format->field = V4L2_FIELD_NONE;
> + else
> + format->field = V4L2_FIELD_ALTERNATE;
> + }
> +
> + if (format->field == V4L2_FIELD_ALTERNATE)
> + format->height = format->height / 2;
> +
> + switch (sampling) {
> + case XST352_BYTE3_COLOR_FORMAT_422:
> + format->code = MEDIA_BUS_FMT_UYVY10_1X20;
> + break;
> + default:
> + dev_err(core->dev, "Unsupported color format : %d\n", sampling);
> + return -EINVAL;
> + }
> +
> + xsdirxss_get_framerate(&state->frame_interval, framerate);
> +
> + dev_dbg(core->dev, "Stream width = %d height = %d Field = %d payload = 0x%08x ts = 0x%08x\n",
> + format->width, format->height, format->field, payload, val);
> + dev_dbg(core->dev, "frame rate numerator = %d denominator = %d\n",
> + state->frame_interval.numerator,
> + state->frame_interval.denominator);
> + dev_dbg(core->dev, "Stream code = 0x%x\n", format->code);
> + return 0;
> +}
> +
> +/**
> + * xsdirxss_irq_handler - Interrupt handler for SDI Rx
> + * @irq: IRQ number
> + * @dev_id: Pointer to device state
> + *
> + * The SDI Rx interrupts are cleared by first setting and then clearing the bits
> + * in the interrupt clear register. The interrupt status register is read only.
> + *
> + * Return: IRQ_HANDLED after handling interrupts
> + */
> +static irqreturn_t xsdirxss_irq_handler(int irq, void *dev_id)
> +{
> + struct xsdirxss_state *state = (struct xsdirxss_state *)dev_id;
> + struct xsdirxss_core *core = &state->core;
> + u32 status;
> +
> + status = xsdirxss_read(core, XSDIRX_ISR_REG);
> + dev_dbg(core->dev, "interrupt status = 0x%08x\n", status);
> +
> + if (!status)
> + return IRQ_NONE;
> +
> + if (status & XSDIRX_INTR_VIDLOCK_MASK) {
> + u32 val1, val2;
> +
> + dev_dbg(core->dev, "video lock interrupt\n");
> + xsdirx_clearintr(core, XSDIRX_INTR_VIDLOCK_MASK);
> +
> + val1 = xsdirxss_read(core, XSDIRX_MODE_DET_STAT_REG);
> + val2 = xsdirxss_read(core, XSDIRX_TS_DET_STAT_REG);
> +
> + if ((val1 & XSDIRX_MODE_DET_STAT_MODE_LOCK_MASK) &&
> + (val2 & XSDIRX_TS_DET_STAT_LOCKED_MASK)) {
> + u32 mask = XSDIRX_RST_CTRL_RST_CRC_ERRCNT_MASK |
> + XSDIRX_RST_CTRL_RST_EDH_ERRCNT_MASK;
> +
> + dev_dbg(core->dev, "mode & ts lock occurred\n");
> +
> + xsdirxss_set(core, XSDIRX_RST_CTRL_REG, mask);
> + xsdirxss_clr(core, XSDIRX_RST_CTRL_REG, mask);
> +
> + val1 = xsdirxss_read(core, XSDIRX_ST352_VALID_REG);
> + val2 = xsdirxss_read(core, XSDIRX_ST352_DS1_REG);
> +
> + dev_dbg(core->dev, "valid st352 mask = 0x%08x\n", val1);
> + dev_dbg(core->dev, "st352 payload = 0x%08x\n", val2);
> +
> + if (!xsdirx_get_stream_properties(state)) {
> + memset(&state->event, 0, sizeof(state->event));
> + state->event.type = V4L2_EVENT_SOURCE_CHANGE;
> + state->event.u.src_change.changes =
> + V4L2_EVENT_SRC_CH_RESOLUTION;
> + v4l2_subdev_notify_event(&state->subdev,
> + &state->event);
> +
> + state->vidlocked = true;
> + } else {
> + dev_err(core->dev, "Unable to get stream properties!\n");
> + state->vidlocked = false;
> + }
> + } else {
> + dev_dbg(core->dev, "video unlock before video lock!\n");
> + state->vidlocked = false;
> + }
> + }
> +
> + if (status & XSDIRX_INTR_VIDUNLOCK_MASK) {
> + dev_dbg(core->dev, "video unlock interrupt\n");
> + xsdirx_clearintr(core, XSDIRX_INTR_VIDUNLOCK_MASK);
> + xsdirx_streamdowncb(core);
> +
> + memset(&state->event, 0, sizeof(state->event));
> + state->event.type = V4L2_EVENT_XLNXSDIRX_VIDUNLOCK;
> + v4l2_subdev_notify_event(&state->subdev, &state->event);
> +
> + state->vidlocked = false;
> + }
> +
> + if (status & XSDIRX_INTR_UNDERFLOW_MASK) {
> + dev_dbg(core->dev, "Video in to AXI4 Stream core underflow interrupt\n");
> + xsdirx_clearintr(core, XSDIRX_INTR_UNDERFLOW_MASK);
> +
> + memset(&state->event, 0, sizeof(state->event));
> + state->event.type = V4L2_EVENT_XLNXSDIRX_UNDERFLOW;
> + v4l2_subdev_notify_event(&state->subdev, &state->event);
> + }
> +
> + if (status & XSDIRX_INTR_OVERFLOW_MASK) {
> + dev_dbg(core->dev, "Video in to AXI4 Stream core overflow interrupt\n");
> + xsdirx_clearintr(core, XSDIRX_INTR_OVERFLOW_MASK);
> +
> + memset(&state->event, 0, sizeof(state->event));
> + state->event.type = V4L2_EVENT_XLNXSDIRX_OVERFLOW;
> + v4l2_subdev_notify_event(&state->subdev, &state->event);
> + }
> + return IRQ_HANDLED;
> +}
> +
> +/**
> + * xsdirxss_subscribe_event - Subscribe to video lock and unlock event
> + * @sd: V4L2 Sub device
> + * @fh: V4L2 File Handle
> + * @sub: Subcribe event structure
> + *
> + * Return: 0 on success, errors otherwise
> + */
> +static int xsdirxss_subscribe_event(struct v4l2_subdev *sd,
> + struct v4l2_fh *fh,
> + struct v4l2_event_subscription *sub)
> +{
> + int ret;
> + struct xsdirxss_state *xsdirxss = to_xsdirxssstate(sd);
> + struct xsdirxss_core *core = &xsdirxss->core;
> +
> + switch (sub->type) {
> + case V4L2_EVENT_XLNXSDIRX_VIDUNLOCK:
> + case V4L2_EVENT_XLNXSDIRX_UNDERFLOW:
> + case V4L2_EVENT_XLNXSDIRX_OVERFLOW:
> + ret = v4l2_event_subscribe(fh, sub, XSDIRX_MAX_EVENTS, NULL);
> + break;
> + case V4L2_EVENT_SOURCE_CHANGE:
> + ret = v4l2_src_change_event_subscribe(fh, sub);
> + break;
> + default:
> + return -EINVAL;
> + }
> + dev_dbg(core->dev, "Event subscribed : 0x%08x\n", sub->type);
> + return ret;
> +}
> +
> +/**
> + * xsdirxss_unsubscribe_event - Unsubscribe from all events registered
> + * @sd: V4L2 Sub device
> + * @fh: V4L2 file handle
> + * @sub: pointer to Event unsubscription structure
> + *
> + * Return: zero on success, else a negative error code.
> + */
> +static int xsdirxss_unsubscribe_event(struct v4l2_subdev *sd,
> + struct v4l2_fh *fh,
> + struct v4l2_event_subscription *sub)
> +{
> + struct xsdirxss_state *xsdirxss = to_xsdirxssstate(sd);
> + struct xsdirxss_core *core = &xsdirxss->core;
> +
> + dev_dbg(core->dev, "Event unsubscribe : 0x%08x\n", sub->type);
> + return v4l2_event_unsubscribe(fh, sub);
> +}
> +
> +/**
> + * xsdirxss_s_ctrl - This is used to set the Xilinx SDI Rx V4L2 controls
> + * @ctrl: V4L2 control to be set
> + *
> + * This function is used to set the V4L2 controls for the Xilinx SDI Rx
> + * Subsystem.
> + *
> + * Return: 0 on success, errors otherwise
> + */
> +static int xsdirxss_s_ctrl(struct v4l2_ctrl *ctrl)
> +{
> + int ret = 0;
> + struct xsdirxss_state *xsdirxss =
> + container_of(ctrl->handler,
> + struct xsdirxss_state, ctrl_handler);
> + struct xsdirxss_core *core = &xsdirxss->core;
> +
> + dev_dbg(core->dev, "set ctrl id = 0x%08x val = 0x%08x\n",
> + ctrl->id, ctrl->val);
> +
> + if (xsdirxss->streaming) {
> + dev_err(core->dev, "Cannot set controls while streaming\n");
> + return -EINVAL;
> + }
> +
> + xsdirx_core_disable(core);
> + switch (ctrl->id) {
> + case V4L2_CID_XILINX_SDIRX_FRAMER:
> + xsdirx_framer(core, ctrl->val);
> + break;
> + case V4L2_CID_XILINX_SDIRX_VIDLOCK_WINDOW:
> + xsdirx_setvidlockwindow(core, ctrl->val);
> + break;
> + case V4L2_CID_XILINX_SDIRX_EDH_ERRCNT_ENABLE:
> + xsdirx_setedherrcnttrigger(core, ctrl->val);
> + break;
> + case V4L2_CID_XILINX_SDIRX_SEARCH_MODES:
> + if (ctrl->val) {
> + if (core->mode == XSDIRXSS_SDI_STD_3G) {
> + dev_dbg(core->dev, "Upto 3G supported\n");
> + ctrl->val &= ~(BIT(XSDIRX_MODE_6G_OFFSET) |
> + BIT(XSDIRX_MODE_12GI_OFFSET) |
> + BIT(XSDIRX_MODE_12GF_OFFSET));
> + }
> +
> + if (core->mode == XSDIRXSS_SDI_STD_6G) {
> + dev_dbg(core->dev, "Upto 6G supported\n");
> + ctrl->val &= ~(BIT(XSDIRX_MODE_12GI_OFFSET) |
> + BIT(XSDIRX_MODE_12GF_OFFSET));
> + }
> +
> + ret = xsdirx_set_modedetect(core, ctrl->val);
> + } else {
> + dev_err(core->dev, "Select at least one mode!\n");
> + return -EINVAL;
> + }
> + break;
> + default:
> + xsdirxss_set(core, XSDIRX_RST_CTRL_REG,
> + XSDIRX_RST_CTRL_SS_EN_MASK);
> + return -EINVAL;
> + }
> + xsdirx_core_enable(core);
> + return ret;
> +}
> +
> +/**
> + * xsdirxss_g_volatile_ctrl - get the Xilinx SDI Rx controls
> + * @ctrl: Pointer to V4L2 control
> + *
> + * Return: 0 on success, errors otherwise
> + */
> +static int xsdirxss_g_volatile_ctrl(struct v4l2_ctrl *ctrl)
> +{
> + u32 val;
> + struct xsdirxss_state *xsdirxss =
> + container_of(ctrl->handler,
> + struct xsdirxss_state, ctrl_handler);
> + struct xsdirxss_core *core = &xsdirxss->core;
> +
> + switch (ctrl->id) {
> + case V4L2_CID_XILINX_SDIRX_MODE_DETECT:
> + if (!xsdirxss->vidlocked) {
> + dev_err(core->dev, "Can't get values when video not locked!\n");
> + return -EINVAL;
> + }
> + val = xsdirxss_read(core, XSDIRX_MODE_DET_STAT_REG);
> + val &= XSDIRX_MODE_DET_STAT_RX_MODE_MASK;
> +
> + switch (val) {
> + case XSDIRX_MODE_SD_MASK:
> + ctrl->val = XSDIRX_MODE_SD_OFFSET;
> + break;
> + case XSDIRX_MODE_HD_MASK:
> + ctrl->val = XSDIRX_MODE_HD_OFFSET;
> + break;
> + case XSDIRX_MODE_3G_MASK:
> + ctrl->val = XSDIRX_MODE_3G_OFFSET;
> + break;
> + case XSDIRX_MODE_6G_MASK:
> + ctrl->val = XSDIRX_MODE_6G_OFFSET;
> + break;
> + case XSDIRX_MODE_12GI_MASK:
> + ctrl->val = XSDIRX_MODE_12GI_OFFSET;
> + break;
> + case XSDIRX_MODE_12GF_MASK:
> + ctrl->val = XSDIRX_MODE_12GF_OFFSET;
> + break;
> + }
> + break;
> + case V4L2_CID_XILINX_SDIRX_CRC:
> + ctrl->val = xsdirxss_read(core, XSDIRX_CRC_ERRCNT_REG);
> + xsdirxss_write(core, XSDIRX_CRC_ERRCNT_REG, 0xFFFF);
> + break;
> + case V4L2_CID_XILINX_SDIRX_EDH_ERRCNT:
> + val = xsdirxss_read(core, XSDIRX_MODE_DET_STAT_REG);
> + val &= XSDIRX_MODE_DET_STAT_RX_MODE_MASK;
> + if (val == XSDIRX_MODE_SD_MASK) {
> + ctrl->val = xsdirxss_read(core, XSDIRX_EDH_ERRCNT_REG);
> + } else {
> + dev_dbg(core->dev, "%d - not in SD mode\n", ctrl->id);
> + return -EINVAL;
> + }
> + break;
> + case V4L2_CID_XILINX_SDIRX_EDH_STATUS:
> + val = xsdirxss_read(core, XSDIRX_MODE_DET_STAT_REG);
> + val &= XSDIRX_MODE_DET_STAT_RX_MODE_MASK;
> + if (val == XSDIRX_MODE_SD_MASK) {
> + ctrl->val = xsdirxss_read(core, XSDIRX_EDH_STAT_REG);
> + } else {
> + dev_dbg(core->dev, "%d - not in SD mode\n", ctrl->id);
> + return -EINVAL;
> + }
> + break;
> + case V4L2_CID_XILINX_SDIRX_TS_IS_INTERLACED:
> + if (!xsdirxss->vidlocked) {
> + dev_err(core->dev, "Can't get values when video not locked!\n");
> + return -EINVAL;
> + }
> + ctrl->val = xsdirxss->ts_is_interlaced;
> + break;
> + case V4L2_CID_XILINX_SDIRX_ACTIVE_STREAMS:
> + if (!xsdirxss->vidlocked) {
> + dev_err(core->dev, "Can't get values when video not locked!\n");
> + return -EINVAL;
> + }
> + val = xsdirxss_read(core, XSDIRX_MODE_DET_STAT_REG);
> + val &= XSDIRX_MODE_DET_STAT_ACT_STREAM_MASK;
> + val >>= XSDIRX_MODE_DET_STAT_ACT_STREAM_OFFSET;
> + ctrl->val = 1 << val;
> + break;
> + case V4L2_CID_XILINX_SDIRX_IS_3GB:
> + if (!xsdirxss->vidlocked) {
> + dev_err(core->dev, "Can't get values when video not locked!\n");
> + return -EINVAL;
> + }
> + val = xsdirxss_read(core, XSDIRX_MODE_DET_STAT_REG);
> + val &= XSDIRX_MODE_DET_STAT_LVLB_3G_MASK;
> + ctrl->val = val ? true : false;
> + break;
> + default:
> + dev_err(core->dev, "Get Invalid control id 0x%0x\n", ctrl->id);
> + return -EINVAL;
> + }
> + dev_dbg(core->dev, "Get ctrl id = 0x%08x val = 0x%08x\n",
> + ctrl->id, ctrl->val);
> + return 0;
> +}
> +
> +/**
> + * xsdirxss_log_status - Logs the status of the SDI Rx Subsystem
> + * @sd: Pointer to V4L2 subdevice structure
> + *
> + * This function prints the current status of Xilinx SDI Rx Subsystem
> + *
> + * Return: 0 on success
> + */
> +static int xsdirxss_log_status(struct v4l2_subdev *sd)
> +{
> + struct xsdirxss_state *xsdirxss = to_xsdirxssstate(sd);
> + struct xsdirxss_core *core = &xsdirxss->core;
> + u32 data, i;
> +
> + v4l2_info(sd, "***** SDI Rx subsystem reg dump start *****\n");
> + for (i = 0; i < 0x28; i++) {
> + data = xsdirxss_read(core, i * 4);
> + v4l2_info(sd, "offset 0x%08x data 0x%08x\n",
> + i * 4, data);
> + }
> + v4l2_info(sd, "***** SDI Rx subsystem reg dump end *****\n");
> + return 0;
> +}
> +
> +static void xsdirxss_start_stream(struct xsdirxss_state *xsdirxss)
> +{
> + xsdirx_streamflow_control(&xsdirxss->core, true);
> +}
> +
> +static void xsdirxss_stop_stream(struct xsdirxss_state *xsdirxss)
> +{
> + xsdirx_streamflow_control(&xsdirxss->core, false);
> +}
> +
> +/**
> + * xsdirxss_g_frame_interval - Get the frame interval
> + * @sd: V4L2 Sub device
> + * @fi: Pointer to V4l2 Sub device frame interval structure
> + *
> + * This function is used to get the frame interval.
> + * The frame rate can be integral or fractional.
> + * Integral frame rate e.g. numerator = 1000, denominator = 24000 => 24 fps
> + * Fractional frame rate e.g. numerator = 1001, denominator = 24000 => 23.97 fps
> + *
> + * Return: 0 on success
> + */
> +static int xsdirxss_g_frame_interval(struct v4l2_subdev *sd,
> + struct v4l2_subdev_frame_interval *fi)
> +{
> + struct xsdirxss_state *xsdirxss = to_xsdirxssstate(sd);
> + struct xsdirxss_core *core = &xsdirxss->core;
> +
> + if (!xsdirxss->vidlocked) {
> + dev_err(core->dev, "Video not locked!\n");
> + return -EINVAL;
> + }
> +
> + fi->interval = xsdirxss->frame_interval;
> +
> + dev_dbg(core->dev, "frame rate numerator = %d denominator = %d\n",
> + xsdirxss->frame_interval.numerator,
> + xsdirxss->frame_interval.denominator);
> + return 0;
> +}
> +
> +/**
> + * xsdirxss_s_stream - It is used to start/stop the streaming.
> + * @sd: V4L2 Sub device
> + * @enable: Flag (True / False)
> + *
> + * This function controls the start or stop of streaming for the
> + * Xilinx SDI Rx Subsystem.
> + *
> + * Return: 0 on success, errors otherwise
> + */
> +static int xsdirxss_s_stream(struct v4l2_subdev *sd, int enable)
> +{
> + struct xsdirxss_state *xsdirxss = to_xsdirxssstate(sd);
> + struct xsdirxss_core *core = &xsdirxss->core;
> +
> + if (enable) {
> + if (!xsdirxss->vidlocked) {
> + dev_dbg(core->dev, "Video is not locked\n");
> + return -EINVAL;
> + }
> + if (xsdirxss->streaming) {
> + dev_dbg(core->dev, "Already streaming\n");
> + return -EINVAL;
> + }
> +
> + xsdirxss_start_stream(xsdirxss);
> + xsdirxss->streaming = true;
> + dev_dbg(core->dev, "Streaming started\n");
> + } else {
> + if (!xsdirxss->streaming) {
> + dev_dbg(core->dev, "Stopped streaming already\n");
> + return -EINVAL;
> + }
> +
> + xsdirxss_stop_stream(xsdirxss);
> + xsdirxss->streaming = false;
> + dev_dbg(core->dev, "Streaming stopped\n");
> + }
> +
> + return 0;
> +}
> +
> +static struct v4l2_mbus_framefmt *
> +__xsdirxss_get_pad_format(struct xsdirxss_state *xsdirxss,
> + struct v4l2_subdev_pad_config *cfg,
> + unsigned int pad, u32 which)
> +{
> + switch (which) {
> + case V4L2_SUBDEV_FORMAT_TRY:
> + return v4l2_subdev_get_try_format(&xsdirxss->subdev, cfg, pad);
> + case V4L2_SUBDEV_FORMAT_ACTIVE:
> + return &xsdirxss->formats[pad];
> + default:
> + return NULL;
> + }
> +}
> +
> +/**
> + * xsdirxss_get_format - Get the pad format
> + * @sd: Pointer to V4L2 Sub device structure
> + * @cfg: Pointer to sub device pad information structure
> + * @fmt: Pointer to pad level media bus format
> + *
> + * This function is used to get the pad format information.
> + *
> + * Return: 0 on success
> + */
> +static int xsdirxss_get_format(struct v4l2_subdev *sd,
> + struct v4l2_subdev_pad_config *cfg,
> + struct v4l2_subdev_format *fmt)
> +{
> + struct xsdirxss_state *xsdirxss = to_xsdirxssstate(sd);
> + struct xsdirxss_core *core = &xsdirxss->core;
> +
> + if (!xsdirxss->vidlocked) {
> + dev_err(core->dev, "Video not locked!\n");
> + return -EINVAL;
> + }
> +
> + fmt->format = *__xsdirxss_get_pad_format(xsdirxss, cfg,
> + fmt->pad, fmt->which);
> +
> + dev_dbg(core->dev, "Stream width = %d height = %d Field = %d\n",
> + fmt->format.width, fmt->format.height, fmt->format.field);
> +
> + return 0;
> +}
> +
> +/**
> + * xsdirxss_set_format - This is used to set the pad format
> + * @sd: Pointer to V4L2 Sub device structure
> + * @cfg: Pointer to sub device pad information structure
> + * @fmt: Pointer to pad level media bus format
> + *
> + * This function is used to set the pad format.
> + * Since the pad format is fixed in hardware, it can't be
> + * modified on run time.
> + *
> + * Return: 0 on success
> + */
> +static int xsdirxss_set_format(struct v4l2_subdev *sd,
> + struct v4l2_subdev_pad_config *cfg,
> + struct v4l2_subdev_format *fmt)
> +{
> + struct v4l2_mbus_framefmt *__format;
> + struct xsdirxss_state *xsdirxss = to_xsdirxssstate(sd);
> +
> + dev_dbg(xsdirxss->core.dev,
> + "set width %d height %d code %d field %d colorspace %d\n",
> + fmt->format.width, fmt->format.height,
> + fmt->format.code, fmt->format.field,
> + fmt->format.colorspace);
> +
> + __format = __xsdirxss_get_pad_format(xsdirxss, cfg,
> + fmt->pad, fmt->which);
> +
> + /* Currently reset the code to one fixed in hardware */
> + /* TODO : Add checks for width height */
> + fmt->format.code = __format->code;
> +
> + return 0;
> +}
> +
> +/**
> + * xsdirxss_open - Called on v4l2_open()
> + * @sd: Pointer to V4L2 sub device structure
> + * @fh: Pointer to V4L2 File handle
> + *
> + * This function is called on v4l2_open(). It sets the default format for pad.
> + *
> + * Return: 0 on success
> + */
> +static int xsdirxss_open(struct v4l2_subdev *sd,
> + struct v4l2_subdev_fh *fh)
> +{
> + struct v4l2_mbus_framefmt *format;
> + struct xsdirxss_state *xsdirxss = to_xsdirxssstate(sd);
> +
> + format = v4l2_subdev_get_try_format(sd, fh->pad, 0);
> + *format = xsdirxss->default_format;
How about using the init_cfg op instead?
> +
> + return 0;
> +}
> +
> +/**
> + * xsdirxss_close - Called on v4l2_close()
> + * @sd: Pointer to V4L2 sub device structure
> + * @fh: Pointer to V4L2 File handle
> + *
> + * This function is called on v4l2_close().
> + *
> + * Return: 0 on success
> + */
> +static int xsdirxss_close(struct v4l2_subdev *sd,
> + struct v4l2_subdev_fh *fh)
> +{
> + return 0;
No need to implement an empty close op.
> +}
> +
> +/* -----------------------------------------------------------------------------
> + * Media Operations
> + */
> +
> +static const struct media_entity_operations xsdirxss_media_ops = {
> + .link_validate = v4l2_subdev_link_validate
> +};
> +
> +static const struct v4l2_ctrl_ops xsdirxss_ctrl_ops = {
> + .g_volatile_ctrl = xsdirxss_g_volatile_ctrl,
> + .s_ctrl = xsdirxss_s_ctrl
> +};
> +
> +static struct v4l2_ctrl_config xsdirxss_edh_ctrls[] = {
> + {
> + .ops = &xsdirxss_ctrl_ops,
> + .id = V4L2_CID_XILINX_SDIRX_EDH_ERRCNT_ENABLE,
> + .name = "SDI Rx : EDH Error Count Enable",
> + .type = V4L2_CTRL_TYPE_BITMASK,
> + .min = 0,
> + .max = XSDIRX_EDH_ALLERR_MASK,
> + .def = 0,
> + }, {
> + .ops = &xsdirxss_ctrl_ops,
> + .id = V4L2_CID_XILINX_SDIRX_EDH_ERRCNT,
> + .name = "SDI Rx : EDH Error Count",
> + .type = V4L2_CTRL_TYPE_INTEGER,
> + .min = 0,
> + .max = 0xFFFF,
> + .step = 1,
> + .def = 0,
> + .flags = V4L2_CTRL_FLAG_VOLATILE | V4L2_CTRL_FLAG_READ_ONLY,
> + }, {
> + .ops = &xsdirxss_ctrl_ops,
> + .id = V4L2_CID_XILINX_SDIRX_EDH_STATUS,
> + .name = "SDI Rx : EDH Status",
> + .type = V4L2_CTRL_TYPE_INTEGER,
> + .min = 0,
> + .max = 0xFFFFFFFF,
> + .step = 1,
> + .def = 0,
> + .flags = V4L2_CTRL_FLAG_VOLATILE | V4L2_CTRL_FLAG_READ_ONLY,
> + }
> +};
> +
> +static struct v4l2_ctrl_config xsdirxss_ctrls[] = {
> + {
> + .ops = &xsdirxss_ctrl_ops,
> + .id = V4L2_CID_XILINX_SDIRX_FRAMER,
> + .name = "SDI Rx : Enable Framer",
> + .type = V4L2_CTRL_TYPE_BOOLEAN,
> + .min = false,
> + .max = true,
> + .step = 1,
> + .def = true,
> + }, {
> + .ops = &xsdirxss_ctrl_ops,
> + .id = V4L2_CID_XILINX_SDIRX_VIDLOCK_WINDOW,
> + .name = "SDI Rx : Video Lock Window",
> + .type = V4L2_CTRL_TYPE_INTEGER,
> + .min = 0,
> + .max = 0xFFFFFFFF,
> + .step = 1,
> + .def = XSDIRX_DEFAULT_VIDEO_LOCK_WINDOW,
> + }, {
> + .ops = &xsdirxss_ctrl_ops,
> + .id = V4L2_CID_XILINX_SDIRX_SEARCH_MODES,
> + .name = "SDI Rx : Modes search Mask",
> + .type = V4L2_CTRL_TYPE_BITMASK,
> + .min = 0,
> + .max = XSDIRX_DETECT_ALL_MODES,
> + .def = XSDIRX_DETECT_ALL_MODES,
> + }, {
> + .ops = &xsdirxss_ctrl_ops,
> + .id = V4L2_CID_XILINX_SDIRX_MODE_DETECT,
> + .name = "SDI Rx : Mode Detect Status",
> + .type = V4L2_CTRL_TYPE_INTEGER,
> + .min = XSDIRX_MODE_SD_OFFSET,
> + .max = XSDIRX_MODE_12GF_OFFSET,
> + .step = 1,
> + .flags = V4L2_CTRL_FLAG_VOLATILE | V4L2_CTRL_FLAG_READ_ONLY,
> + }, {
> + .ops = &xsdirxss_ctrl_ops,
> + .id = V4L2_CID_XILINX_SDIRX_CRC,
> + .name = "SDI Rx : CRC Error status",
> + .type = V4L2_CTRL_TYPE_INTEGER,
> + .min = 0,
> + .max = 0xFFFFFFFF,
> + .step = 1,
> + .def = 0,
> + .flags = V4L2_CTRL_FLAG_VOLATILE | V4L2_CTRL_FLAG_READ_ONLY,
> + }, {
> + .ops = &xsdirxss_ctrl_ops,
> + .id = V4L2_CID_XILINX_SDIRX_TS_IS_INTERLACED,
> + .name = "SDI Rx : TS is Interlaced",
> + .type = V4L2_CTRL_TYPE_BOOLEAN,
> + .min = false,
> + .max = true,
> + .def = false,
> + .step = 1,
> + .flags = V4L2_CTRL_FLAG_VOLATILE | V4L2_CTRL_FLAG_READ_ONLY,
> + }, {
> + .ops = &xsdirxss_ctrl_ops,
> + .id = V4L2_CID_XILINX_SDIRX_ACTIVE_STREAMS,
> + .name = "SDI Rx : Active Streams",
> + .type = V4L2_CTRL_TYPE_INTEGER,
> + .min = 1,
> + .max = 16,
> + .def = 1,
> + .step = 1,
> + .flags = V4L2_CTRL_FLAG_VOLATILE | V4L2_CTRL_FLAG_READ_ONLY,
> + }, {
> + .ops = &xsdirxss_ctrl_ops,
> + .id = V4L2_CID_XILINX_SDIRX_IS_3GB,
> + .name = "SDI Rx : Is 3GB",
> + .type = V4L2_CTRL_TYPE_BOOLEAN,
> + .min = false,
> + .max = true,
> + .def = false,
> + .step = 1,
> + .flags = V4L2_CTRL_FLAG_VOLATILE | V4L2_CTRL_FLAG_READ_ONLY,
> + }
> +};
> +
> +static const struct v4l2_subdev_core_ops xsdirxss_core_ops = {
> + .log_status = xsdirxss_log_status,
> + .subscribe_event = xsdirxss_subscribe_event,
> + .unsubscribe_event = xsdirxss_unsubscribe_event
> +};
> +
> +static struct v4l2_subdev_video_ops xsdirxss_video_ops = {
> + .g_frame_interval = xsdirxss_g_frame_interval,
> + .s_stream = xsdirxss_s_stream
> +};
> +
> +static struct v4l2_subdev_pad_ops xsdirxss_pad_ops = {
> + .get_fmt = xsdirxss_get_format,
> + .set_fmt = xsdirxss_set_format,
> +};
> +
> +static struct v4l2_subdev_ops xsdirxss_ops = {
> + .core = &xsdirxss_core_ops,
> + .video = &xsdirxss_video_ops,
> + .pad = &xsdirxss_pad_ops
> +};
> +
> +static const struct v4l2_subdev_internal_ops xsdirxss_internal_ops = {
> + .open = xsdirxss_open,
> + .close = xsdirxss_close
> +};
> +
> +/* -----------------------------------------------------------------------------
> + * Platform Device Driver
> + */
> +
> +static int xsdirxss_parse_of(struct xsdirxss_state *xsdirxss)
> +{
> + struct device_node *node = xsdirxss->core.dev->of_node;
> + struct device_node *ports = NULL;
> + struct device_node *port = NULL;
> + unsigned int nports = 0;
> + struct xsdirxss_core *core = &xsdirxss->core;
> + int ret;
> + const char *sdi_std;
> +
> + core->include_edh = of_property_read_bool(node, "xlnx,include-edh");
> + dev_dbg(core->dev, "EDH property = %s\n",
> + core->include_edh ? "Present" : "Absent");
> +
> + ret = of_property_read_string(node, "xlnx,line-rate",
> + &sdi_std);
> + if (ret < 0) {
> + dev_err(core->dev, "xlnx,line-rate property not found\n");
> + return ret;
> + }
> +
> + if (!strncmp(sdi_std, "12G_SDI_8DS", XSDIRX_MAX_STR_LENGTH)) {
> + core->mode = XSDIRXSS_SDI_STD_12G_8DS;
> + } else if (!strncmp(sdi_std, "6G_SDI", XSDIRX_MAX_STR_LENGTH)) {
> + core->mode = XSDIRXSS_SDI_STD_6G;
> + } else if (!strncmp(sdi_std, "3G_SDI", XSDIRX_MAX_STR_LENGTH)) {
> + core->mode = XSDIRXSS_SDI_STD_3G;
> + } else {
> + dev_err(core->dev, "Invalid Line Rate\n");
> + return -EINVAL;
> + }
> + dev_dbg(core->dev, "SDI Rx Line Rate = %s, mode = %d\n", sdi_std,
> + core->mode);
> +
> + ports = of_get_child_by_name(node, "ports");
> + if (!ports)
> + ports = node;
> +
> + for_each_child_of_node(ports, port) {
Please use the graph API to parse the graph instead.
> + const struct xvip_video_format *format;
> + struct device_node *endpoint;
> +
> + if (!port->name || of_node_cmp(port->name, "port"))
> + continue;
> +
> + format = xvip_of_get_format(port);
> + if (IS_ERR(format)) {
> + dev_err(core->dev, "invalid format in DT");
> + return PTR_ERR(format);
> + }
> +
> + dev_dbg(core->dev, "vf_code = %d bpc = %d bpp = %d\n",
> + format->vf_code, format->width, format->bpp);
> +
> + if (format->vf_code != XVIP_VF_YUV_422 &&
> + format->vf_code != XVIP_VF_YUV_420) {
> + dev_err(core->dev, "Incorrect UG934 video format set.\n");
> + return -EINVAL;
> + }
> + xsdirxss->vip_format = format;
> +
> + endpoint = of_get_next_child(port, NULL);
> + if (!endpoint) {
> + dev_err(core->dev, "No port at\n");
> + return -EINVAL;
> + }
> +
> + /* Count the number of ports. */
> + nports++;
> + }
> +
> + if (nports != 1) {
> + dev_err(core->dev, "invalid number of ports %u\n", nports);
> + return -EINVAL;
> + }
> +
> + /* Register interrupt handler */
> + core->irq = irq_of_parse_and_map(node, 0);
> +
> + ret = devm_request_irq(core->dev, core->irq, xsdirxss_irq_handler,
> + IRQF_SHARED, "xilinx-sdirxss", xsdirxss);
> + if (ret) {
> + dev_err(core->dev, "Err = %d Interrupt handler reg failed!\n",
> + ret);
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static int xsdirxss_probe(struct platform_device *pdev)
> +{
> + struct v4l2_subdev *subdev;
> + struct xsdirxss_state *xsdirxss;
> + struct xsdirxss_core *core;
> + struct resource *res;
> + int ret;
> + unsigned int num_ctrls, num_edh_ctrls = 0, i;
> +
> + xsdirxss = devm_kzalloc(&pdev->dev, sizeof(*xsdirxss), GFP_KERNEL);
> + if (!xsdirxss)
> + return -ENOMEM;
> +
> + xsdirxss->core.dev = &pdev->dev;
> + core = &xsdirxss->core;
> +
> + core->axi_clk = devm_clk_get(&pdev->dev, "s_axi_aclk");
> + if (IS_ERR(core->axi_clk)) {
> + ret = PTR_ERR(core->axi_clk);
> + dev_err(&pdev->dev, "failed to get s_axi_clk (%d)\n", ret);
> + return ret;
> + }
> +
> + core->sdirx_clk = devm_clk_get(&pdev->dev, "sdi_rx_clk");
> + if (IS_ERR(core->sdirx_clk)) {
> + ret = PTR_ERR(core->sdirx_clk);
> + dev_err(&pdev->dev, "failed to get sdi_rx_clk (%d)\n", ret);
> + return ret;
> + }
> +
> + core->vidout_clk = devm_clk_get(&pdev->dev, "video_out_clk");
> + if (IS_ERR(core->vidout_clk)) {
> + ret = PTR_ERR(core->vidout_clk);
> + dev_err(&pdev->dev, "failed to get video_out_aclk (%d)\n", ret);
> + return ret;
> + }
> +
> + ret = clk_prepare_enable(core->axi_clk);
> + if (ret) {
> + dev_err(&pdev->dev, "failed to enable axi_clk (%d)\n", ret);
> + return ret;
> + }
> +
> + ret = clk_prepare_enable(core->sdirx_clk);
> + if (ret) {
> + dev_err(&pdev->dev, "failed to enable sdirx_clk (%d)\n", ret);
> + goto rx_clk_err;
> + }
> +
> + ret = clk_prepare_enable(core->vidout_clk);
> + if (ret) {
> + dev_err(&pdev->dev, "failed to enable vidout_clk (%d)\n", ret);
> + goto vidout_clk_err;
> + }
> +
> + ret = xsdirxss_parse_of(xsdirxss);
> + if (ret < 0)
> + goto clk_err;
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + xsdirxss->core.iomem = devm_ioremap_resource(xsdirxss->core.dev, res);
> + if (IS_ERR(xsdirxss->core.iomem)) {
> + ret = PTR_ERR(xsdirxss->core.iomem);
> + goto clk_err;
> + }
> +
> + /* Reset the core */
> + xsdirx_streamflow_control(core, false);
> + xsdirx_core_disable(core);
> + xsdirx_clearintr(core, XSDIRX_INTR_ALL_MASK);
> + xsdirx_disableintr(core, XSDIRX_INTR_ALL_MASK);
> + xsdirx_enableintr(core, XSDIRX_INTR_ALL_MASK);
> + xsdirx_globalintr(core, true);
> + xsdirxss_write(core, XSDIRX_CRC_ERRCNT_REG, 0xFFFF);
> +
> + /* Initialize V4L2 subdevice and media entity */
> + xsdirxss->pads[0].flags = MEDIA_PAD_FL_SOURCE;
> +
> + /* Initialize the default format */
> + xsdirxss->default_format.code = xsdirxss->vip_format->code;
> + xsdirxss->default_format.field = V4L2_FIELD_NONE;
> + xsdirxss->default_format.colorspace = V4L2_COLORSPACE_DEFAULT;
> + xsdirxss->default_format.width = XSDIRX_DEFAULT_WIDTH;
> + xsdirxss->default_format.height = XSDIRX_DEFAULT_HEIGHT;
> +
> + xsdirxss->formats[0] = xsdirxss->default_format;
> +
> + /* Initialize V4L2 subdevice and media entity */
> + subdev = &xsdirxss->subdev;
> + v4l2_subdev_init(subdev, &xsdirxss_ops);
> +
> + subdev->dev = &pdev->dev;
> + subdev->internal_ops = &xsdirxss_internal_ops;
> + strlcpy(subdev->name, dev_name(&pdev->dev), sizeof(subdev->name));
> +
> + subdev->flags |= V4L2_SUBDEV_FL_HAS_EVENTS | V4L2_SUBDEV_FL_HAS_DEVNODE;
> +
> + subdev->entity.ops = &xsdirxss_media_ops;
> +
> + v4l2_set_subdevdata(subdev, xsdirxss);
> +
> + ret = media_entity_pads_init(&subdev->entity, 1, xsdirxss->pads);
> + if (ret < 0)
> + goto error;
> +
> + /* Initialise and register the controls */
> + num_ctrls = ARRAY_SIZE(xsdirxss_ctrls);
> +
> + if (xsdirxss->core.include_edh)
> + num_edh_ctrls = ARRAY_SIZE(xsdirxss_edh_ctrls);
> +
> + v4l2_ctrl_handler_init(&xsdirxss->ctrl_handler,
> + (num_ctrls + num_edh_ctrls));
> +
> + for (i = 0; i < num_ctrls; i++) {
> + struct v4l2_ctrl *ctrl;
> +
> + dev_dbg(xsdirxss->core.dev, "%d %s ctrl = 0x%x\n",
> + i, xsdirxss_ctrls[i].name, xsdirxss_ctrls[i].id);
> +
> + ctrl = v4l2_ctrl_new_custom(&xsdirxss->ctrl_handler,
> + &xsdirxss_ctrls[i], NULL);
> + if (!ctrl) {
> + dev_dbg(xsdirxss->core.dev, "Failed to add %s ctrl\n",
> + xsdirxss_ctrls[i].name);
> + goto error;
> + }
> + }
> +
> + if (xsdirxss->core.include_edh) {
> + for (i = 0; i < num_edh_ctrls; i++) {
> + struct v4l2_ctrl *ctrl;
> +
> + dev_dbg(xsdirxss->core.dev, "%d %s ctrl = 0x%x\n",
> + i, xsdirxss_edh_ctrls[i].name,
> + xsdirxss_edh_ctrls[i].id);
> +
> + ctrl = v4l2_ctrl_new_custom(&xsdirxss->ctrl_handler,
> + &xsdirxss_edh_ctrls[i],
> + NULL);
> + if (!ctrl) {
> + dev_dbg(xsdirxss->core.dev, "Failed to add %s ctrl\n",
> + xsdirxss_edh_ctrls[i].name);
> + goto error;
> + }
> + }
> + } else {
> + dev_dbg(xsdirxss->core.dev, "Not registering the EDH controls as EDH is disabled in IP\n");
> + }
> +
> + if (xsdirxss->ctrl_handler.error) {
> + dev_err(&pdev->dev, "failed to add controls\n");
> + ret = xsdirxss->ctrl_handler.error;
> + goto error;
> + }
> +
> + subdev->ctrl_handler = &xsdirxss->ctrl_handler;
> +
> + ret = v4l2_ctrl_handler_setup(&xsdirxss->ctrl_handler);
> + if (ret < 0) {
> + dev_err(&pdev->dev, "failed to set controls\n");
> + goto error;
> + }
> +
> + platform_set_drvdata(pdev, xsdirxss);
> +
> + ret = v4l2_async_register_subdev(subdev);
> + if (ret < 0) {
> + dev_err(&pdev->dev, "failed to register subdev\n");
> + goto error;
> + }
> +
> + xsdirxss->streaming = false;
> +
> + dev_info(xsdirxss->core.dev, "Xilinx SDI Rx Subsystem device found!\n");
> +
> + xsdirx_core_enable(core);
> +
> + return 0;
> +error:
> + v4l2_ctrl_handler_free(&xsdirxss->ctrl_handler);
> + media_entity_cleanup(&subdev->entity);
> +
> +clk_err:
> + clk_disable_unprepare(core->vidout_clk);
> +vidout_clk_err:
> + clk_disable_unprepare(core->sdirx_clk);
> +rx_clk_err:
> + clk_disable_unprepare(core->axi_clk);
> + return ret;
> +}
> +
> +static int xsdirxss_remove(struct platform_device *pdev)
> +{
> + struct xsdirxss_state *xsdirxss = platform_get_drvdata(pdev);
> + struct v4l2_subdev *subdev = &xsdirxss->subdev;
> +
> + v4l2_async_unregister_subdev(subdev);
> + v4l2_ctrl_handler_free(&xsdirxss->ctrl_handler);
> + media_entity_cleanup(&subdev->entity);
> + clk_disable_unprepare(xsdirxss->core.vidout_clk);
> + clk_disable_unprepare(xsdirxss->core.sdirx_clk);
> + clk_disable_unprepare(xsdirxss->core.axi_clk);
> + return 0;
> +}
> +
> +static const struct of_device_id xsdirxss_of_id_table[] = {
> + { .compatible = "xlnx,v-smpte-uhdsdi-rx-ss" },
> + { }
> +};
> +MODULE_DEVICE_TABLE(of, xsdirxss_of_id_table);
> +
> +static struct platform_driver xsdirxss_driver = {
> + .driver = {
> + .name = "xilinx-sdirxss",
> + .of_match_table = xsdirxss_of_id_table,
> + },
> + .probe = xsdirxss_probe,
> + .remove = xsdirxss_remove,
> +};
> +
> +module_platform_driver(xsdirxss_driver);
> +
> +MODULE_AUTHOR("Vishal Sagar <vsagar@...inx.com>");
> +MODULE_DESCRIPTION("Xilinx SDI Rx Subsystem Driver");
> +MODULE_LICENSE("GPL v2");
> diff --git a/include/uapi/linux/xilinx-sdirxss.h b/include/uapi/linux/xilinx-sdirxss.h
> new file mode 100644
> index 0000000..983a43b
> --- /dev/null
> +++ b/include/uapi/linux/xilinx-sdirxss.h
> @@ -0,0 +1,63 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Xilinx SDI Rx Subsystem mode and flag definitions.
> + *
> + * Copyright (C) 2019 Xilinx, Inc.
> + *
> + * Contacts: Vishal Sagar <vishal.sagar@...inx.com>
> + *
> + */
> +
> +#ifndef __UAPI_XILINX_SDIRXSS_H__
> +#define __UAPI_XILINX_SDIRXSS_H__
> +
> +#include <linux/types.h>
> +#include <linux/videodev2.h>
> +
> +/*
> + * This enum is used to prepare the bitmask of modes to be detected
> + */
> +enum {
> + XSDIRX_MODE_SD_OFFSET = 0,
> + XSDIRX_MODE_HD_OFFSET,
> + XSDIRX_MODE_3G_OFFSET,
> + XSDIRX_MODE_6G_OFFSET,
> + XSDIRX_MODE_12GI_OFFSET,
> + XSDIRX_MODE_12GF_OFFSET,
> + XSDIRX_MODE_NUM_SUPPORTED,
> +};
> +
> +#define XSDIRX_DETECT_ALL_MODES (BIT(XSDIRX_MODE_SD_OFFSET) | \
> + BIT(XSDIRX_MODE_HD_OFFSET) | \
> + BIT(XSDIRX_MODE_3G_OFFSET) | \
> + BIT(XSDIRX_MODE_6G_OFFSET) | \
> + BIT(XSDIRX_MODE_12GI_OFFSET) | \
> + BIT(XSDIRX_MODE_12GF_OFFSET))
> +
> +/*
> + * EDH Error Types
> + * ANC - Ancillary Data Packet Errors
> + * FF - Full Field Errors
> + * AP - Active Portion Errors
> + */
> +
> +#define XSDIRX_EDH_ERRCNT_ANC_EDH_ERR BIT(0)
> +#define XSDIRX_EDH_ERRCNT_ANC_EDA_ERR BIT(1)
> +#define XSDIRX_EDH_ERRCNT_ANC_IDH_ERR BIT(2)
> +#define XSDIRX_EDH_ERRCNT_ANC_IDA_ERR BIT(3)
> +#define XSDIRX_EDH_ERRCNT_ANC_UES_ERR BIT(4)
> +#define XSDIRX_EDH_ERRCNT_FF_EDH_ERR BIT(5)
> +#define XSDIRX_EDH_ERRCNT_FF_EDA_ERR BIT(6)
> +#define XSDIRX_EDH_ERRCNT_FF_IDH_ERR BIT(7)
> +#define XSDIRX_EDH_ERRCNT_FF_IDA_ERR BIT(8)
> +#define XSDIRX_EDH_ERRCNT_FF_UES_ERR BIT(9)
> +#define XSDIRX_EDH_ERRCNT_AP_EDH_ERR BIT(10)
> +#define XSDIRX_EDH_ERRCNT_AP_EDA_ERR BIT(11)
> +#define XSDIRX_EDH_ERRCNT_AP_IDH_ERR BIT(12)
> +#define XSDIRX_EDH_ERRCNT_AP_IDA_ERR BIT(13)
> +#define XSDIRX_EDH_ERRCNT_AP_UES_ERR BIT(14)
> +#define XSDIRX_EDH_ERRCNT_PKT_CHKSUM_ERR BIT(15)
> +
> +#define XSDIRX_EDH_ALLERR_MASK 0xFFFF
> +
> +#endif /* __UAPI_XILINX_SDIRXSS_H__ */
> diff --git a/include/uapi/linux/xilinx-v4l2-controls.h b/include/uapi/linux/xilinx-v4l2-controls.h
> index f023623..4c68a10 100644
> --- a/include/uapi/linux/xilinx-v4l2-controls.h
> +++ b/include/uapi/linux/xilinx-v4l2-controls.h
> @@ -83,4 +83,34 @@
> /* Reset all event counters */
> #define V4L2_CID_XILINX_MIPICSISS_RESET_COUNTERS (V4L2_CID_XILINX_MIPICSISS + 2)
>
> +/*
> + * Xilinx SDI Rx Subsystem
> + */
> +
> +/* Base ID */
> +#define V4L2_CID_XILINX_SDIRX (V4L2_CID_USER_BASE + 0xc100)
> +
> +/* Framer Control */
> +#define V4L2_CID_XILINX_SDIRX_FRAMER (V4L2_CID_XILINX_SDIRX + 1)
> +/* Video Lock Window Control */
> +#define V4L2_CID_XILINX_SDIRX_VIDLOCK_WINDOW (V4L2_CID_XILINX_SDIRX + 2)
> +/* EDH Error Mask Control */
> +#define V4L2_CID_XILINX_SDIRX_EDH_ERRCNT_ENABLE (V4L2_CID_XILINX_SDIRX + 3)
> +/* Mode search Control */
> +#define V4L2_CID_XILINX_SDIRX_SEARCH_MODES (V4L2_CID_XILINX_SDIRX + 4)
> +/* Get Detected Mode control */
> +#define V4L2_CID_XILINX_SDIRX_MODE_DETECT (V4L2_CID_XILINX_SDIRX + 5)
> +/* Get CRC error status */
> +#define V4L2_CID_XILINX_SDIRX_CRC (V4L2_CID_XILINX_SDIRX + 6)
> +/* Get EDH error count control */
> +#define V4L2_CID_XILINX_SDIRX_EDH_ERRCNT (V4L2_CID_XILINX_SDIRX + 7)
> +/* Get EDH status control */
> +#define V4L2_CID_XILINX_SDIRX_EDH_STATUS (V4L2_CID_XILINX_SDIRX + 8)
> +/* Get Transport Interlaced status */
> +#define V4L2_CID_XILINX_SDIRX_TS_IS_INTERLACED (V4L2_CID_XILINX_SDIRX + 9)
> +/* Get Active Streams count */
> +#define V4L2_CID_XILINX_SDIRX_ACTIVE_STREAMS (V4L2_CID_XILINX_SDIRX + 10)
> +/* Is Mode 3GB */
> +#define V4L2_CID_XILINX_SDIRX_IS_3GB (V4L2_CID_XILINX_SDIRX + 11)
> +
> #endif /* __UAPI_XILINX_V4L2_CONTROLS_H__ */
> diff --git a/include/uapi/linux/xilinx-v4l2-events.h b/include/uapi/linux/xilinx-v4l2-events.h
> index 2aa357c..7b47595 100644
> --- a/include/uapi/linux/xilinx-v4l2-events.h
> +++ b/include/uapi/linux/xilinx-v4l2-events.h
> @@ -18,4 +18,13 @@
> /* Stream Line Buffer full */
> #define V4L2_EVENT_XLNXCSIRX_SLBF (V4L2_EVENT_XLNXCSIRX_CLASS | 0x1)
>
> +/* Xilinx SMPTE UHD-SDI RX Subsystem */
> +#define V4L2_EVENT_XLNXSDIRX_CLASS (V4L2_EVENT_PRIVATE_START | 0x200)
> +/* Video Unlock event */
> +#define V4L2_EVENT_XLNXSDIRX_VIDUNLOCK (V4L2_EVENT_XLNXSDIRX_CLASS | 0x1)
> +/* Video in to AXI4 Stream core underflowed */
> +#define V4L2_EVENT_XLNXSDIRX_UNDERFLOW (V4L2_EVENT_XLNXSDIRX_CLASS | 0x2)
> +/* Video in to AXI4 Stream core overflowed */
> +#define V4L2_EVENT_XLNXSDIRX_OVERFLOW (V4L2_EVENT_XLNXSDIRX_CLASS | 0x3)
> +
> #endif /* __UAPI_XILINX_V4L2_EVENTS_H__ */
> --
> 1.8.3.1
This must be old.
--
Kind regards,
Sakari Ailus
Powered by blists - more mailing lists