linux-kernel - [PATCH v2] x86/hyperv: make vapic support x2apic mode

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Date:   Wed, 2 Oct 2019 10:19:30 +0000
From:   Roman Kagan <rkagan@...tuozzo.com>
To:     Michael Kelley <mikelley@...rosoft.com>,
        Lan Tianyu <Tianyu.Lan@...rosoft.com>,
        Joerg Roedel <jroedel@...e.de>,
        "K. Y. Srinivasan" <kys@...rosoft.com>,
        Haiyang Zhang <haiyangz@...rosoft.com>,
        Stephen Hemminger <sthemmin@...rosoft.com>,
        Sasha Levin <sashal@...nel.org>,
        Thomas Gleixner <tglx@...utronix.de>,
        Ingo Molnar <mingo@...hat.com>, Borislav Petkov <bp@...en8.de>,
        "H. Peter Anvin" <hpa@...or.com>,
        "x86@...nel.org" <x86@...nel.org>,
        "linux-hyperv@...r.kernel.org" <linux-hyperv@...r.kernel.org>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
CC:     "kvm@...r.kernel.org" <kvm@...r.kernel.org>
Subject: [PATCH v2] x86/hyperv: make vapic support x2apic mode

Now that there's Hyper-V IOMMU driver, Linux can switch to x2apic mode
when supported by the vcpus.

However, the apic access functions for Hyper-V enlightened apic assume
xapic mode only.

As a result, Linux fails to bring up secondary cpus when run as a guest
in QEMU/KVM with both hv_apic and x2apic enabled.

I didn't manage to make my instance of Hyper-V expose x2apic to the
guest; nor does Hyper-V spec document the expected behavior.  However,
a Windows guest running in QEMU/KVM with hv_apic and x2apic and a big
number of vcpus (so that it turns on x2apic mode) does use enlightened
apic MSRs passing unshifted 32bit destination id and falls back to the
regular x2apic MSRs for less frequently used apic fields.

So implement the same behavior, by replacing enlightened apic access
functions (only those where it makes a difference) with their
x2apic-aware versions when x2apic is in use.

Fixes: 29217a474683 ("iommu/hyper-v: Add Hyper-V stub IOMMU driver")
Fixes: 6b48cb5f8347 ("X86/Hyper-V: Enlighten APIC access")
Cc: stable@...r.kernel.org
Signed-off-by: Roman Kagan <rkagan@...tuozzo.com>
---
v1 -> v2:
- add ifdefs to handle !CONFIG_X86_X2APIC

 arch/x86/hyperv/hv_apic.c | 54 ++++++++++++++++++++++++++++++++++++---
 1 file changed, 51 insertions(+), 3 deletions(-)

diff --git a/arch/x86/hyperv/hv_apic.c b/arch/x86/hyperv/hv_apic.c
index 5c056b8aebef..eb1434ae9e46 100644
--- a/arch/x86/hyperv/hv_apic.c
+++ b/arch/x86/hyperv/hv_apic.c
@@ -84,6 +84,44 @@ static void hv_apic_write(u32 reg, u32 val)
 	}
 }
 
+#ifdef CONFIG_X86_X2APIC
+static void hv_x2apic_icr_write(u32 low, u32 id)
+{
+	wrmsr(HV_X64_MSR_ICR, low, id);
+}
+
+static u32 hv_x2apic_read(u32 reg)
+{
+	u32 reg_val, hi;
+
+	switch (reg) {
+	case APIC_EOI:
+		rdmsr(HV_X64_MSR_EOI, reg_val, hi);
+		return reg_val;
+	case APIC_TASKPRI:
+		rdmsr(HV_X64_MSR_TPR, reg_val, hi);
+		return reg_val;
+
+	default:
+		return native_apic_msr_read(reg);
+	}
+}
+
+static void hv_x2apic_write(u32 reg, u32 val)
+{
+	switch (reg) {
+	case APIC_EOI:
+		wrmsr(HV_X64_MSR_EOI, val, 0);
+		break;
+	case APIC_TASKPRI:
+		wrmsr(HV_X64_MSR_TPR, val, 0);
+		break;
+	default:
+		native_apic_msr_write(reg, val);
+	}
+}
+#endif /* CONFIG_X86_X2APIC */
+
 static void hv_apic_eoi_write(u32 reg, u32 val)
 {
 	struct hv_vp_assist_page *hvp = hv_vp_assist_page[smp_processor_id()];
@@ -262,9 +300,19 @@ void __init hv_apic_init(void)
 	if (ms_hyperv.hints & HV_X64_APIC_ACCESS_RECOMMENDED) {
 		pr_info("Hyper-V: Using MSR based APIC access\n");
 		apic_set_eoi_write(hv_apic_eoi_write);
-		apic->read      = hv_apic_read;
-		apic->write     = hv_apic_write;
-		apic->icr_write = hv_apic_icr_write;
+#ifdef CONFIG_X86_X2APIC
+		if (x2apic_enabled()) {
+			apic->read      = hv_x2apic_read;
+			apic->write     = hv_x2apic_write;
+			apic->icr_write = hv_x2apic_icr_write;
+		} else {
+#endif
+			apic->read      = hv_apic_read;
+			apic->write     = hv_apic_write;
+			apic->icr_write = hv_apic_icr_write;
+#ifdef CONFIG_X86_X2APIC
+		}
+#endif
 		apic->icr_read  = hv_apic_icr_read;
 	}
 }
-- 
2.21.0