linux-kernel - Re: [PATCH v10 06/16] leds: lp50xx: Add the LP50XX family of the RGB LED driver

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <d674fcb2-922e-7801-a3a1-ee86f571eb64@gmail.com>
Date:   Sun, 6 Oct 2019 18:12:45 +0200
From:   Jacek Anaszewski <jacek.anaszewski@...il.com>
To:     Dan Murphy <dmurphy@...com>, pavel@....cz
Cc:     linux-leds@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v10 06/16] leds: lp50xx: Add the LP50XX family of the RGB
 LED driver

Dan,

On 10/1/19 4:56 PM, Dan Murphy wrote:
> Introduce the LP5036/30/24/18/12/9 RGB LED driver.
> The difference in these parts are the number of
> LED outputs where the:
> 
> LP5036 can control 36 LEDs
> LP5030 can control 30 LEDs
> LP5024 can control 24 LEDs
> LP5018 can control 18 LEDs
> LP5012 can control 12 LEDs
> LP5009 can control 9 LEDs
> 
> The device has the ability to group LED output into control banks
> so that multiple LED banks can be controlled with the same mixing and
> brightness.  Inversely the LEDs can also be controlled independently.
> 
> Signed-off-by: Dan Murphy <dmurphy@...com>
> ---
>  drivers/leds/Kconfig       |  11 +
>  drivers/leds/Makefile      |   1 +
>  drivers/leds/leds-lp50xx.c | 784 +++++++++++++++++++++++++++++++++++++
>  3 files changed, 796 insertions(+)
>  create mode 100644 drivers/leds/leds-lp50xx.c
> 
> diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
> index cfb1ebb6517f..84f60e35c5ee 100644
> --- a/drivers/leds/Kconfig
> +++ b/drivers/leds/Kconfig
> @@ -363,6 +363,17 @@ config LEDS_LP3952
>  	  To compile this driver as a module, choose M here: the
>  	  module will be called leds-lp3952.
>  
> +config LEDS_LP50XX
> +	tristate "LED Support for TI LP5036/30/24/18/12/9 LED driver chip"
> +	depends on LEDS_CLASS && REGMAP_I2C
> +	depends on LEDS_CLASS_MULTI_COLOR
> +	help
> +	  If you say yes here you get support for the Texas Instruments
> +	  LP5036, LP5030, LP5024, LP5018, LP5012 and LP5009 LED driver.
> +
> +	  To compile this driver as a module, choose M here: the
> +	  module will be called leds-lp50xx.
> +
>  config LEDS_LP55XX_COMMON
>  	tristate "Common Driver for TI/National LP5521/5523/55231/5562/8501"
>  	depends on LEDS_LP5521 || LEDS_LP5523 || LEDS_LP5562 || LEDS_LP8501
> diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
> index 841038cfe35b..7a208a0f7b84 100644
> --- a/drivers/leds/Makefile
> +++ b/drivers/leds/Makefile
> @@ -34,6 +34,7 @@ obj-$(CONFIG_LEDS_GPIO_REGISTER)	+= leds-gpio-register.o
>  obj-$(CONFIG_LEDS_GPIO)			+= leds-gpio.o
>  obj-$(CONFIG_LEDS_LP3944)		+= leds-lp3944.o
>  obj-$(CONFIG_LEDS_LP3952)		+= leds-lp3952.o
> +obj-$(CONFIG_LEDS_LP50XX)		+= leds-lp50xx.o
>  obj-$(CONFIG_LEDS_LP55XX_COMMON)	+= leds-lp55xx-common.o
>  obj-$(CONFIG_LEDS_LP5521)		+= leds-lp5521.o
>  obj-$(CONFIG_LEDS_LP5523)		+= leds-lp5523.o
> diff --git a/drivers/leds/leds-lp50xx.c b/drivers/leds/leds-lp50xx.c
[...]
> +static int lp50xx_probe_dt(struct lp50xx *priv)
> +{
> +	u32 led_banks[LP5036_MAX_LED_MODULES];
> +	struct fwnode_handle *child = NULL;
> +	struct fwnode_handle *led_node = NULL;
> +	struct led_init_data init_data;
> +	struct lp50xx_led *led;
> +	int num_colors;
> +	u32 color_id;
> +	int led_number;
> +	size_t i = 0;
> +	int ret;
> +
> +	priv->enable_gpio = devm_gpiod_get_optional(&priv->client->dev,
> +						   "enable", GPIOD_OUT_LOW);
> +	if (IS_ERR(priv->enable_gpio)) {
> +		ret = PTR_ERR(priv->enable_gpio);
> +		dev_err(&priv->client->dev, "Failed to get enable gpio: %d\n",
> +			ret);
> +		return ret;
> +	}
> +
> +	priv->regulator = devm_regulator_get(&priv->client->dev, "vled");
> +	if (IS_ERR(priv->regulator))
> +		priv->regulator = NULL;
> +
> +	device_for_each_child_node(&priv->client->dev, child) {
> +		led = &priv->leds[i];
> +		if (fwnode_property_present(child, "ti,led-bank")) {
> +			ret = fwnode_property_read_u32_array(child,
> +							     "ti,led-bank",
> +							     NULL, 0);
> +			ret = fwnode_property_read_u32_array(child,
> +							     "ti,led-bank",
> +							     led_banks,
> +							     ret);

You could check if bank numbers are within a range.

> +			if (ret) {
> +				dev_err(&priv->client->dev,
> +					"led-bank property is missing\n");
> +				fwnode_handle_put(child);
> +				goto child_out;
> +			}
> +
> +			priv->num_of_banked_leds = ARRAY_SIZE(led_banks);
> +
> +			ret = lp50xx_set_banks(priv, led_banks);
> +			if (ret) {
> +				dev_err(&priv->client->dev,
> +					"Cannot setup banked LEDs\n");
> +				fwnode_handle_put(child);
> +				goto child_out;
> +			}
> +			led->ctrl_bank_enabled = 1;
> +
> +		} else {
> +			ret = fwnode_property_read_u32(child, "reg",
> +					       &led_number);

The same applies to the led_number.

> +			if (ret) {
> +				dev_err(&priv->client->dev,
> +					"led reg property missing\n");
> +				fwnode_handle_put(child);
> +				goto child_out;
> +			}
> +
> +			led->led_number = led_number;
> +		}

-- 
Best regards,
Jacek Anaszewski