| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20191008161749.1.I4476e6e2b1026ff388eb11813310264e25aa9cc9@changeid>
Date: Tue, 8 Oct 2019 16:18:30 -0600
From: Daniel Campello <campello@...omium.org>
To: LKML <linux-kernel@...r.kernel.org>
Cc: Daniel Campello <campello@...omium.org>,
Nick Crews <ncrews@...omium.org>,
Enric Balletbo i Serra <enric.balletbo@...labora.com>,
Benson Leung <bleung@...omium.org>,
Raul E Rangel <rrangel@...omium.org>
Subject: [PATCH v4] wilco_ec: Add Dell's USB PowerShare Policy control
USB PowerShare is a policy which affects charging via the special
USB PowerShare port (marked with a small lightning bolt or battery icon)
when in low power states:
- In S0, the port will always provide power.
- In S0ix, if usb_charge is enabled, then power will be supplied to
the port when on AC or if battery is > 50%. Else no power is supplied.
- In S5, if usb_charge is enabled, then power will be supplied to
the port when on AC. Else no power is supplied.
Signed-off-by: Daniel Campello <campello@...omium.org>
Signed-off-by: Nick Crews <ncrews@...omium.org>
---
v4 changes:
- Renamed from usb_power_share to usb_charge to match existing feature
in other platforms in the kernel (i.e., sony-laptop, samsung-laptop,
lg-laptop)
v3 changes:
- Drop a silly blank line
- Use val > 1 instead of val != 0 && val != 1
v2 changes:
- Move documentation to Documentation/ABI/testing/sysfs-platform-wilco-ec
- Zero out reserved bytes in requests.
.../ABI/testing/sysfs-platform-wilco-ec | 17 ++++
drivers/platform/chrome/wilco_ec/sysfs.c | 91 +++++++++++++++++++
2 files changed, 108 insertions(+)
diff --git a/Documentation/ABI/testing/sysfs-platform-wilco-ec b/Documentation/ABI/testing/sysfs-platform-wilco-ec
index 8827a734f933..bb7ba67cae97 100644
--- a/Documentation/ABI/testing/sysfs-platform-wilco-ec
+++ b/Documentation/ABI/testing/sysfs-platform-wilco-ec
@@ -31,6 +31,23 @@ Description:
Output will a version string be similar to the example below:
08B6
+What: /sys/bus/platform/devices/GOOG000C\:00/usb_charge
+Date: October 2019
+KernelVersion: 5.5
+Description:
+ Control the USB PowerShare Policy. USB PowerShare is a policy
+ which affects charging via the special USB PowerShare port
+ (marked with a small lightning bolt or battery icon) when in
+ low power states:
+ - In S0, the port will always provide power.
+ - In S0ix, if usb_charge is enabled, then power will be
+ supplied to the port when on AC or if battery is > 50%.
+ Else no power is supplied.
+ - In S5, if usb_charge is enabled, then power will be supplied
+ to the port when on AC. Else no power is supplied.
+
+ Input should be either "0" or "1".
+
What: /sys/bus/platform/devices/GOOG000C\:00/version
Date: May 2019
KernelVersion: 5.3
diff --git a/drivers/platform/chrome/wilco_ec/sysfs.c b/drivers/platform/chrome/wilco_ec/sysfs.c
index 3b86a21005d3..f0d174b6bb21 100644
--- a/drivers/platform/chrome/wilco_ec/sysfs.c
+++ b/drivers/platform/chrome/wilco_ec/sysfs.c
@@ -23,6 +23,26 @@ struct boot_on_ac_request {
u8 reserved7;
} __packed;
+#define CMD_USB_CHARGE 0x39
+
+enum usb_charge_op {
+ USB_CHARGE_GET = 0,
+ USB_CHARGE_SET = 1,
+};
+
+struct usb_charge_request {
+ u8 cmd; /* Always CMD_USB_CHARGE */
+ u8 reserved;
+ u8 op; /* One of enum usb_charge_op */
+ u8 val; /* When setting, either 0 or 1 */
+} __packed;
+
+struct usb_charge_response {
+ u8 reserved;
+ u8 status; /* Set by EC to 0 on success, other value on failure */
+ u8 val; /* When getting, set by EC to either 0 or 1 */
+} __packed;
+
#define CMD_EC_INFO 0x38
enum get_ec_info_op {
CMD_GET_EC_LABEL = 0,
@@ -131,12 +151,83 @@ static ssize_t model_number_show(struct device *dev,
static DEVICE_ATTR_RO(model_number);
+static int send_usb_charge(struct wilco_ec_device *ec,
+ struct usb_charge_request *rq,
+ struct usb_charge_response *rs)
+{
+ struct wilco_ec_message msg;
+ int ret;
+
+ memset(&msg, 0, sizeof(msg));
+ msg.type = WILCO_EC_MSG_LEGACY;
+ msg.request_data = rq;
+ msg.request_size = sizeof(*rq);
+ msg.response_data = rs;
+ msg.response_size = sizeof(*rs);
+ ret = wilco_ec_mailbox(ec, &msg);
+ if (ret < 0)
+ return ret;
+ if (rs->status)
+ return -EIO;
+
+ return 0;
+}
+
+static ssize_t usb_charge_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct wilco_ec_device *ec = dev_get_drvdata(dev);
+ struct usb_charge_request rq;
+ struct usb_charge_response rs;
+ int ret;
+
+ memset(&rq, 0, sizeof(rq));
+ rq.cmd = CMD_USB_CHARGE;
+ rq.op = USB_CHARGE_GET;
+
+ ret = send_usb_charge(ec, &rq, &rs);
+ if (ret < 0)
+ return ret;
+
+ return sprintf(buf, "%d\n", rs.val);
+}
+
+static ssize_t usb_charge_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct wilco_ec_device *ec = dev_get_drvdata(dev);
+ struct usb_charge_request rq;
+ struct usb_charge_response rs;
+ int ret;
+ u8 val;
+
+ ret = kstrtou8(buf, 10, &val);
+ if (ret < 0)
+ return ret;
+ if (val > 1)
+ return -EINVAL;
+
+ memset(&rq, 0, sizeof(rq));
+ rq.cmd = CMD_USB_CHARGE;
+ rq.op = USB_CHARGE_SET;
+ rq.val = val;
+
+ ret = send_usb_charge(ec, &rq, &rs);
+ if (ret < 0)
+ return ret;
+
+ return count;
+}
+
+static DEVICE_ATTR_RW(usb_charge);
static struct attribute *wilco_dev_attrs[] = {
&dev_attr_boot_on_ac.attr,
&dev_attr_build_date.attr,
&dev_attr_build_revision.attr,
&dev_attr_model_number.attr,
+ &dev_attr_usb_charge.attr,
&dev_attr_version.attr,
NULL,
};
--
2.23.0.581.g78d2f28ef7-goog
Powered by blists - more mailing lists