| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAHX4x85WTGKMDn22T6SmaemVS1km8yNRgXNj3AgyAzB=69B3nA@mail.gmail.com>
Date: Wed, 9 Oct 2019 09:00:19 -0600
From: Nick Crews <ncrews@...omium.org>
To: Daniel Campello <campello@...omium.org>
Cc: LKML <linux-kernel@...r.kernel.org>,
Enric Balletbo i Serra <enric.balletbo@...labora.com>,
Benson Leung <bleung@...omium.org>,
Raul E Rangel <rrangel@...omium.org>
Subject: Re: [PATCH v4] wilco_ec: Add Dell's USB PowerShare Policy control
On Tue, Oct 8, 2019 at 4:18 PM Daniel Campello <campello@...omium.org> wrote:
>
> USB PowerShare is a policy which affects charging via the special
> USB PowerShare port (marked with a small lightning bolt or battery icon)
> when in low power states:
> - In S0, the port will always provide power.
> - In S0ix, if usb_charge is enabled, then power will be supplied to
> the port when on AC or if battery is > 50%. Else no power is supplied.
> - In S5, if usb_charge is enabled, then power will be supplied to
> the port when on AC. Else no power is supplied.
>
> Signed-off-by: Daniel Campello <campello@...omium.org>
> Signed-off-by: Nick Crews <ncrews@...omium.org>
> ---
>
> v4 changes:
> - Renamed from usb_power_share to usb_charge to match existing feature
> in other platforms in the kernel (i.e., sony-laptop, samsung-laptop,
> lg-laptop)
Daniel and I put in considerable effort trying to get this integrated
with the USB subsystem. However, it was becoming much too
complicated, so we hoped that if we made this more consistent
with the three existing examples it would be acceptable.
Thanks for the thoughts,
Nick
> v3 changes:
> - Drop a silly blank line
> - Use val > 1 instead of val != 0 && val != 1
> v2 changes:
> - Move documentation to Documentation/ABI/testing/sysfs-platform-wilco-ec
> - Zero out reserved bytes in requests.
>
> .../ABI/testing/sysfs-platform-wilco-ec | 17 ++++
> drivers/platform/chrome/wilco_ec/sysfs.c | 91 +++++++++++++++++++
> 2 files changed, 108 insertions(+)
>
> diff --git a/Documentation/ABI/testing/sysfs-platform-wilco-ec b/Documentation/ABI/testing/sysfs-platform-wilco-ec
> index 8827a734f933..bb7ba67cae97 100644
> --- a/Documentation/ABI/testing/sysfs-platform-wilco-ec
> +++ b/Documentation/ABI/testing/sysfs-platform-wilco-ec
> @@ -31,6 +31,23 @@ Description:
> Output will a version string be similar to the example below:
> 08B6
>
> +What: /sys/bus/platform/devices/GOOG000C\:00/usb_charge
> +Date: October 2019
> +KernelVersion: 5.5
> +Description:
> + Control the USB PowerShare Policy. USB PowerShare is a policy
> + which affects charging via the special USB PowerShare port
> + (marked with a small lightning bolt or battery icon) when in
> + low power states:
> + - In S0, the port will always provide power.
> + - In S0ix, if usb_charge is enabled, then power will be
> + supplied to the port when on AC or if battery is > 50%.
> + Else no power is supplied.
> + - In S5, if usb_charge is enabled, then power will be supplied
> + to the port when on AC. Else no power is supplied.
> +
> + Input should be either "0" or "1".
> +
> What: /sys/bus/platform/devices/GOOG000C\:00/version
> Date: May 2019
> KernelVersion: 5.3
> diff --git a/drivers/platform/chrome/wilco_ec/sysfs.c b/drivers/platform/chrome/wilco_ec/sysfs.c
> index 3b86a21005d3..f0d174b6bb21 100644
> --- a/drivers/platform/chrome/wilco_ec/sysfs.c
> +++ b/drivers/platform/chrome/wilco_ec/sysfs.c
> @@ -23,6 +23,26 @@ struct boot_on_ac_request {
> u8 reserved7;
> } __packed;
>
> +#define CMD_USB_CHARGE 0x39
> +
> +enum usb_charge_op {
> + USB_CHARGE_GET = 0,
> + USB_CHARGE_SET = 1,
> +};
> +
> +struct usb_charge_request {
> + u8 cmd; /* Always CMD_USB_CHARGE */
> + u8 reserved;
> + u8 op; /* One of enum usb_charge_op */
> + u8 val; /* When setting, either 0 or 1 */
> +} __packed;
> +
> +struct usb_charge_response {
> + u8 reserved;
> + u8 status; /* Set by EC to 0 on success, other value on failure */
> + u8 val; /* When getting, set by EC to either 0 or 1 */
> +} __packed;
> +
> #define CMD_EC_INFO 0x38
> enum get_ec_info_op {
> CMD_GET_EC_LABEL = 0,
> @@ -131,12 +151,83 @@ static ssize_t model_number_show(struct device *dev,
>
> static DEVICE_ATTR_RO(model_number);
>
> +static int send_usb_charge(struct wilco_ec_device *ec,
> + struct usb_charge_request *rq,
> + struct usb_charge_response *rs)
> +{
> + struct wilco_ec_message msg;
> + int ret;
> +
> + memset(&msg, 0, sizeof(msg));
> + msg.type = WILCO_EC_MSG_LEGACY;
> + msg.request_data = rq;
> + msg.request_size = sizeof(*rq);
> + msg.response_data = rs;
> + msg.response_size = sizeof(*rs);
> + ret = wilco_ec_mailbox(ec, &msg);
> + if (ret < 0)
> + return ret;
> + if (rs->status)
> + return -EIO;
> +
> + return 0;
> +}
> +
> +static ssize_t usb_charge_show(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + struct wilco_ec_device *ec = dev_get_drvdata(dev);
> + struct usb_charge_request rq;
> + struct usb_charge_response rs;
> + int ret;
> +
> + memset(&rq, 0, sizeof(rq));
> + rq.cmd = CMD_USB_CHARGE;
> + rq.op = USB_CHARGE_GET;
> +
> + ret = send_usb_charge(ec, &rq, &rs);
> + if (ret < 0)
> + return ret;
> +
> + return sprintf(buf, "%d\n", rs.val);
> +}
> +
> +static ssize_t usb_charge_store(struct device *dev,
> + struct device_attribute *attr,
> + const char *buf, size_t count)
> +{
> + struct wilco_ec_device *ec = dev_get_drvdata(dev);
> + struct usb_charge_request rq;
> + struct usb_charge_response rs;
> + int ret;
> + u8 val;
> +
> + ret = kstrtou8(buf, 10, &val);
> + if (ret < 0)
> + return ret;
> + if (val > 1)
> + return -EINVAL;
> +
> + memset(&rq, 0, sizeof(rq));
> + rq.cmd = CMD_USB_CHARGE;
> + rq.op = USB_CHARGE_SET;
> + rq.val = val;
> +
> + ret = send_usb_charge(ec, &rq, &rs);
> + if (ret < 0)
> + return ret;
> +
> + return count;
> +}
> +
> +static DEVICE_ATTR_RW(usb_charge);
>
> static struct attribute *wilco_dev_attrs[] = {
> &dev_attr_boot_on_ac.attr,
> &dev_attr_build_date.attr,
> &dev_attr_build_revision.attr,
> &dev_attr_model_number.attr,
> + &dev_attr_usb_charge.attr,
> &dev_attr_version.attr,
> NULL,
> };
> --
> 2.23.0.581.g78d2f28ef7-goog
>
Powered by blists - more mailing lists