Date:   Wed, 9 Oct 2019 12:43:14 +0300
From:   Grygorii Strashko <grygorii.strashko@...com>
To:     Tony Lindgren <tony@...mide.com>,
        Jeroen Hofstee <jhofstee@...tronenergy.com>
CC:     "linux-omap@...r.kernel.org" <linux-omap@...r.kernel.org>,
        Koen Kooi <koen@...inion.thruhere.net>,
        Benoît Cousson <bcousson@...libre.com>,
        open list <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH] ARM: dts: am335x-sancloud-bbe: Fix PHY mode for ethernet



On 08/10/2019 20:02, Tony Lindgren wrote:
> * Jeroen Hofstee <jhofstee@...tronenergy.com> [191008 17:00]:
>> Hi,
>>
>> On 10/8/19 6:51 PM, Tony Lindgren wrote:
>>> * Jeroen Hofstee <jhofstee@...tronenergy.com> [191008 16:43]:
>>>> Hello Tony,
>>>>
>>>> On 10/8/19 6:14 PM, Tony Lindgren wrote:
>>>>> * Jeroen Hofstee <jhofstee@...tronenergy.com> [191008 16:03]:
>>>>>> Hello Tony,
>>>>>>
>>>>>> On 10/8/19 4:23 PM, Tony Lindgren wrote:
>>>>>>> * Grygorii Strashko <grygorii.strashko@...com> [191003 02:32]:
>>>>>>>> On 03/10/2019 11:16, Jeroen Hofstee wrote:
>>>>>>>>> Furthermore 4.19 is fine, so there is no need to include it in stable
>>>>>>>>> and have a note to make sure also other patches are required etc.
>>>>>>>> Hence all above patches went in 5.1 it would be correct to mention only
>>>>>>>> 6d4cd041f0af net: phy: at803x: disable delay only for RGMII mode
>>>>>>> Jeroen, can you please send an updated patch with the fixes
>>>>>>> tag changed?
>>>>>>>
>>>>>> For completeness, there is no "Fixes tag" as you mentioned.
>>>>>> The commit only refers to another commit which introduces
>>>>>> a problem.
>>>>> Well please add the fixes tag, that way this will get
>>>>> properly applied to earlier stable kernels too :)
>>>> But 4.19 is fine, this is an issue in 5.1 as in EOL...
>>>> I really don't understand why I should waste time
>>>> to figure out what happened exactly during the 5.1
>>>> release cycle...
>>> Hmm so what's the issue with just adding the fixes tag Grygorii
>>> suggested:
>>>
>>> 6d4cd041f0af ("net: phy: at803x: disable delay only for RGMII mode")
>>>
>>> No need to dig further?
>>
>> Grygorii doesn't suggest to add a fixes tag, just to change the referenced
>> commit to another. Obviously I would like to understand why another commit
>> should be referenced. And then I should read and parse the response, so there
>> is no special reason, just time...
> 
> OK sure. Well once you guys have the commit figured out, let me
> know what to apply. And we know Grygorii is mostly right based
> on his history of comments so best to not ignore that :)

Sry, but I do not think my request is somehow special.
Yes, your patch is correct by itself, but commit description is not:
1) commit cd28d1d6e52e: ("net: phy: at803x: Disable phy delay for RGMII mode")  which you've mentioned is A BUG
and should not be merged first of all (which you can find out by reading corresponding thread).

just try checkout that commit and apply your patch on top - networking should not work.

But it was merged and not reverted - instead two more patches were applied to fix regression.

2) Those commits are defined final behavior (which i again explained above) and that new behavior hardly can
be called "the bug in the at803x driver" as, unfortunately, there were no common conclusion how default values for
RX/TX delay should be handled vs phy-mode = "rgmii-txid"/"rgmii-rxid".
Originally many PHY driver kept them default (as per boot strapping/bootloader configuration), but now
some driver (including at803x) started disabling RX delay if "rgmii-txid" or TX delay if "rgmii-rxid".

Hence, pls update commit message and add proper fixes tag. smth like:
"Now after commit 6d4cd041f0af net: phy: at803x: disable delay only for RGMII mode the driver will forcibly disable
RGMII RX delay if phy-mode = "rgmii-txid" is specified in DT which will break networking on ..

Hence change .. to ensure ...
Fixes: "


-- 
Best regards,
grygorii

Powered by blists - more mailing lists