| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <alpine.DEB.2.21.1910112336440.3284@hadrien>
Date: Fri, 11 Oct 2019 23:38:44 +0200 (CEST)
From: Julia Lawall <julia.lawall@...6.fr>
To: Jules Irenge <jbi.octave@...il.com>
cc: outreachy-kernel@...glegroups.com, gregkh@...uxfoundation.org,
eric@...olt.net, wahrenst@....net, linux-kernel@...r.kernel.org,
devel@...verdev.osuosl.org, linux-arm-kernel@...ts.infradead.org,
linux-rpi-kernel@...ts.infradead.org, daniela.mormocea@...il.com,
dave.stevenson@...pberrypi.org, hverkuil-cisco@...all.nl,
mchehab+samsung@...nel.org, bcm-kernel-feedback-list@...adcom.com,
sbranden@...adcom.com, rjui@...adcom.com, f.fainelli@...il.com
Subject: Re: [Outreachy kernel] [PATCH] staging: vc04_services: fix warning
of Logical continuations should be on the previous line
On Fri, 11 Oct 2019, Jules Irenge wrote:
> Fix warning of logical continuations should be on the previous line.
> Issue detected by checkpatch tool.
There seem to be several changes mixed together in this patch.
Don't have a subject line that is identical to a line in the log message.
The subject line should be short.
Keeping the arguments of && on the same line, but breaking the line after
a == doesn't seem to be a good idea. It would be better to have the left
argument of == on one line and the right argument on another, if that is
needed.
julia
>
> Signed-off-by: Jules Irenge <jbi.octave@...il.com>
> ---
> .../bcm2835-camera/bcm2835-camera.c | 41 ++++++++-----------
> 1 file changed, 17 insertions(+), 24 deletions(-)
>
> diff --git a/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c b/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c
> index d4d1e44b16b2..365bcd97e19d 100644
> --- a/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c
> +++ b/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c
> @@ -337,9 +337,8 @@ static void buffer_cb(struct vchiq_mmal_instance *instance,
> if (is_capturing(dev)) {
> v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev,
> "Grab another frame");
> - vchiq_mmal_port_parameter_set(
> - instance,
> - dev->capture.camera_port,
> + vchiq_mmal_port_parameter_set(instance,
> + dev->capture.camera_port,
> MMAL_PARAMETER_CAPTURE,
> &dev->capture.frame_count,
> sizeof(dev->capture.frame_count));
> @@ -392,9 +391,8 @@ static void buffer_cb(struct vchiq_mmal_instance *instance,
> is_capturing(dev)) {
> v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev,
> "Grab another frame as buffer has EOS");
> - vchiq_mmal_port_parameter_set(
> - instance,
> - dev->capture.camera_port,
> + vchiq_mmal_port_parameter_set(instance,
> + dev->capture.camera_port,
> MMAL_PARAMETER_CAPTURE,
> &dev->capture.frame_count,
> sizeof(dev->capture.frame_count));
> @@ -1090,8 +1088,7 @@ static int mmal_setup_components(struct bm2835_mmal_dev *dev,
>
> ret = vchiq_mmal_port_set_format(dev->instance, camera_port);
>
> - if (!ret
> - && camera_port ==
> + if (!ret && camera_port ==
> &dev->component[COMP_CAMERA]->output[CAM_PORT_VIDEO]) {
> bool overlay_enabled =
> !!dev->component[COMP_PREVIEW]->enabled;
> @@ -1124,9 +1121,8 @@ static int mmal_setup_components(struct bm2835_mmal_dev *dev,
> dev->capture.timeperframe.numerator;
> ret = vchiq_mmal_port_set_format(dev->instance, preview_port);
> if (overlay_enabled) {
> - ret = vchiq_mmal_port_connect_tunnel(
> - dev->instance,
> - preview_port,
> + ret = vchiq_mmal_port_connect_tunnel(dev->instance,
> + preview_port,
> &dev->component[COMP_PREVIEW]->input[0]);
> if (!ret)
> ret = vchiq_mmal_port_enable(dev->instance,
> @@ -1154,9 +1150,8 @@ static int mmal_setup_components(struct bm2835_mmal_dev *dev,
> camera_port->recommended_buffer.num;
>
> ret =
> - vchiq_mmal_port_connect_tunnel(
> - dev->instance,
> - camera_port,
> + vchiq_mmal_port_connect_tunnel(dev->instance,
> + camera_port,
> &encode_component->input[0]);
> if (ret) {
> v4l2_dbg(1, bcm2835_v4l2_debug,
> @@ -1655,8 +1650,8 @@ static int mmal_init(struct bm2835_mmal_dev *dev)
> dev->capture.enc_level = V4L2_MPEG_VIDEO_H264_LEVEL_4_0;
>
> /* get the preview component ready */
> - ret = vchiq_mmal_component_init(
> - dev->instance, "ril.video_render",
> + ret = vchiq_mmal_component_init(dev->instance,
> + "ril.video_render",
> &dev->component[COMP_PREVIEW]);
> if (ret < 0)
> goto unreg_camera;
> @@ -1669,8 +1664,8 @@ static int mmal_init(struct bm2835_mmal_dev *dev)
> }
>
> /* get the image encoder component ready */
> - ret = vchiq_mmal_component_init(
> - dev->instance, "ril.image_encode",
> + ret = vchiq_mmal_component_init(dev->instance,
> + "ril.image_encode",
> &dev->component[COMP_IMAGE_ENCODE]);
> if (ret < 0)
> goto unreg_preview;
> @@ -1731,15 +1726,13 @@ static int mmal_init(struct bm2835_mmal_dev *dev)
>
> unreg_vid_encoder:
> pr_err("Cleanup: Destroy video encoder\n");
> - vchiq_mmal_component_finalise(
> - dev->instance,
> - dev->component[COMP_VIDEO_ENCODE]);
> + vchiq_mmal_component_finalise(dev->instance,
> + dev->component[COMP_VIDEO_ENCODE]);
>
> unreg_image_encoder:
> pr_err("Cleanup: Destroy image encoder\n");
> - vchiq_mmal_component_finalise(
> - dev->instance,
> - dev->component[COMP_IMAGE_ENCODE]);
> + vchiq_mmal_component_finalise(dev->instance,
> + dev->component[COMP_IMAGE_ENCODE]);
>
> unreg_preview:
> pr_err("Cleanup: Destroy video render\n");
> --
> 2.21.0
>
> --
> You received this message because you are subscribed to the Google Groups "outreachy-kernel" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to outreachy-kernel+unsubscribe@...glegroups.com.
> To view this discussion on the web visit https://groups.google.com/d/msgid/outreachy-kernel/20191011212745.20262-1-jbi.octave%40gmail.com.
>
Powered by blists - more mailing lists