| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20191014091622.23562-1-benjamin.gaignard@st.com>
Date: Mon, 14 Oct 2019 11:16:22 +0200
From: Benjamin Gaignard <benjamin.gaignard@...com>
To: <airlied@...ux.ie>, <daniel@...ll.ch>, <robh+dt@...nel.org>,
<mark.rutland@....com>, <alexandre.torgue@...com>,
<yannick.fertre@...com>, <philippe.cornu@...com>
CC: <dri-devel@...ts.freedesktop.org>, <devicetree@...r.kernel.org>,
<linux-stm32@...md-mailman.stormreply.com>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>,
Benjamin Gaignard <benjamin.gaignard@...com>
Subject: [PATCH v3] dt-bindings: display: Convert stm32 display bindings to json-schema
Convert the STM32 display binding to DT schema format using json-schema.
Split the original bindings in two yaml files:
- one for display controller (ltdc)
- one for DSI controller
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@...com>
---
changes in v3:
- use (GPL-2.0-only OR BSD-2-Clause) license
changes in v2:
- use BSD-2-Clause license
- add panel property
- fix identation
- remove pinctrl-names: true
- remove pinctrl-[0-9]+: true
- rework ports block to include port@0 and port@1
- use const for #adress-cells and #size-cells
- add additionalProperties: false
.../devicetree/bindings/display/st,stm32-dsi.yaml | 151 +++++++++++++++++++++
.../devicetree/bindings/display/st,stm32-ltdc.txt | 144 --------------------
.../devicetree/bindings/display/st,stm32-ltdc.yaml | 81 +++++++++++
3 files changed, 232 insertions(+), 144 deletions(-)
create mode 100644 Documentation/devicetree/bindings/display/st,stm32-dsi.yaml
delete mode 100644 Documentation/devicetree/bindings/display/st,stm32-ltdc.txt
create mode 100644 Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml
diff --git a/Documentation/devicetree/bindings/display/st,stm32-dsi.yaml b/Documentation/devicetree/bindings/display/st,stm32-dsi.yaml
new file mode 100644
index 000000000000..8dd727c7533e
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/st,stm32-dsi.yaml
@@ -0,0 +1,151 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/st,stm32-dsi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 DSI host controller
+
+maintainers:
+ - Philippe Cornu <philippe.cornu@...com>
+ - Yannick Fertre <yannick.fertre@...com>
+
+description:
+ The STMicroelectronics STM32 DSI controller uses the Synopsys DesignWare MIPI-DSI host controller.
+
+properties:
+ compatible:
+ const: st,stm32-dsi
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: Module Clock
+ - description: DSI bus clock
+ - description: Pixel clock
+ minItems: 2
+ maxItems: 3
+
+ clock-names:
+ items:
+ - const: pclk
+ - const: ref
+ - const: px_clk
+ minItems: 2
+ maxItems: 3
+
+ resets:
+ maxItems: 1
+
+ reset-names:
+ items:
+ - const: apb
+
+ phy-dsi-supply:
+ maxItems: 1
+ description:
+ Phandle of the regulator that provides the supply voltage.
+
+ ports:
+ type: object
+ description:
+ A node containing DSI input & output port nodes with endpoint
+ definitions as documented in
+ Documentation/devicetree/bindings/media/video-interfaces.txt
+ Documentation/devicetree/bindings/graph.txt
+ properties:
+ port@0:
+ type: object
+ description:
+ DSI input port node, connected to the ltdc rgb output port.
+
+ port@1:
+ type: object
+ description:
+ DSI output port node, connected to a panel or a bridge input port"
+
+patternProperties:
+ "^(panel|panel-dsi)@[0-9]$":
+ type: object
+ description:
+ A node containing the panel or bridge description as documented in
+ Documentation/devicetree/bindings/display/mipi-dsi-bus.txt
+ properties:
+ port@0:
+ type: object
+ description:
+ Panel or bridge port node, connected to the DSI output port (port@1)
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+required:
+ - "#address-cells"
+ - "#size-cells"
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - ports
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/stm32mp1-clks.h>
+ #include <dt-bindings/reset/stm32mp1-resets.h>
+ #include <dt-bindings/gpio/gpio.h>
+ dsi: dsi@...00000 {
+ compatible = "st,stm32-dsi";
+ reg = <0x5a000000 0x800>;
+ clocks = <&rcc DSI_K>, <&clk_hse>, <&rcc DSI_PX>;
+ clock-names = "pclk", "ref", "px_clk";
+ resets = <&rcc DSI_R>;
+ reset-names = "apb";
+ phy-dsi-supply = <®18>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dsi_in: endpoint {
+ remote-endpoint = <<dc_ep1_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dsi_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+ };
+
+ panel-dsi@0 {
+ compatible = "orisetech,otm8009a";
+ reg = <0>;
+ reset-gpios = <&gpioe 4 GPIO_ACTIVE_LOW>;
+ power-supply = <&v3v3>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&dsi_out>;
+ };
+ };
+ };
+ };
+
+...
+
+
diff --git a/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt b/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt
deleted file mode 100644
index 60c54da4e526..000000000000
--- a/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt
+++ /dev/null
@@ -1,144 +0,0 @@
-* STMicroelectronics STM32 lcd-tft display controller
-
-- ltdc: lcd-tft display controller host
- Required properties:
- - compatible: "st,stm32-ltdc"
- - reg: Physical base address of the IP registers and length of memory mapped region.
- - clocks: A list of phandle + clock-specifier pairs, one for each
- entry in 'clock-names'.
- - clock-names: A list of clock names. For ltdc it should contain:
- - "lcd" for the clock feeding the output pixel clock & IP clock.
- - resets: reset to be used by the device (defined by use of RCC macro).
- Required nodes:
- - Video port for DPI RGB output: ltdc has one video port with up to 2
- endpoints:
- - for external dpi rgb panel or bridge, using gpios.
- - for internal dpi input of the MIPI DSI host controller.
- Note: These 2 endpoints cannot be activated simultaneously.
-
-* STMicroelectronics STM32 DSI controller specific extensions to Synopsys
- DesignWare MIPI DSI host controller
-
-The STMicroelectronics STM32 DSI controller uses the Synopsys DesignWare MIPI
-DSI host controller. For all mandatory properties & nodes, please refer
-to the related documentation in [5].
-
-Mandatory properties specific to STM32 DSI:
-- #address-cells: Should be <1>.
-- #size-cells: Should be <0>.
-- compatible: "st,stm32-dsi".
-- clock-names:
- - phy pll reference clock string name, must be "ref".
-- resets: see [5].
-- reset-names: see [5].
-
-Mandatory nodes specific to STM32 DSI:
-- ports: A node containing DSI input & output port nodes with endpoint
- definitions as documented in [3] & [4].
- - port@0: DSI input port node, connected to the ltdc rgb output port.
- - port@1: DSI output port node, connected to a panel or a bridge input port.
-- panel or bridge node: A node containing the panel or bridge description as
- documented in [6].
- - port: panel or bridge port node, connected to the DSI output port (port@1).
-Optional properties:
-- phy-dsi-supply: phandle of the regulator that provides the supply voltage.
-
-Note: You can find more documentation in the following references
-[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-[2] Documentation/devicetree/bindings/reset/reset.txt
-[3] Documentation/devicetree/bindings/media/video-interfaces.txt
-[4] Documentation/devicetree/bindings/graph.txt
-[5] Documentation/devicetree/bindings/display/bridge/dw_mipi_dsi.txt
-[6] Documentation/devicetree/bindings/display/mipi-dsi-bus.txt
-
-Example 1: RGB panel
-/ {
- ...
- soc {
- ...
- ltdc: display-controller@...16800 {
- compatible = "st,stm32-ltdc";
- reg = <0x40016800 0x200>;
- interrupts = <88>, <89>;
- resets = <&rcc STM32F4_APB2_RESET(LTDC)>;
- clocks = <&rcc 1 CLK_LCD>;
- clock-names = "lcd";
-
- port {
- ltdc_out_rgb: endpoint {
- };
- };
- };
- };
-};
-
-Example 2: DSI panel
-
-/ {
- ...
- soc {
- ...
- ltdc: display-controller@...16800 {
- compatible = "st,stm32-ltdc";
- reg = <0x40016800 0x200>;
- interrupts = <88>, <89>;
- resets = <&rcc STM32F4_APB2_RESET(LTDC)>;
- clocks = <&rcc 1 CLK_LCD>;
- clock-names = "lcd";
-
- port {
- ltdc_out_dsi: endpoint {
- remote-endpoint = <&dsi_in>;
- };
- };
- };
-
-
- dsi: dsi@...16c00 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "st,stm32-dsi";
- reg = <0x40016c00 0x800>;
- clocks = <&rcc 1 CLK_F469_DSI>, <&clk_hse>;
- clock-names = "pclk", "ref";
- resets = <&rcc STM32F4_APB2_RESET(DSI)>;
- reset-names = "apb";
- phy-dsi-supply = <®18>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- dsi_in: endpoint {
- remote-endpoint = <<dc_out_dsi>;
- };
- };
-
- port@1 {
- reg = <1>;
- dsi_out: endpoint {
- remote-endpoint = <&dsi_in_panel>;
- };
- };
-
- };
-
- panel-dsi@0 {
- reg = <0>; /* dsi virtual channel (0..3) */
- compatible = ...;
- enable-gpios = ...;
-
- port {
- dsi_in_panel: endpoint {
- remote-endpoint = <&dsi_out>;
- };
- };
-
- };
-
- };
-
- };
-};
diff --git a/Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml b/Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml
new file mode 100644
index 000000000000..94a4137f7236
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/st,stm32-ltdc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 lcd-tft display controller
+
+maintainers:
+ - Philippe Cornu <philippe.cornu@...com>
+ - Yannick Fertre <yannick.fertre@...com>
+
+properties:
+ compatible:
+ const: st,stm32-ltdc
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ minItems: 2
+ maxItems: 2
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ items:
+ - const: lcd
+
+ resets:
+ maxItems: 1
+
+ port:
+ type: object
+ description:
+ "Video port for DPI RGB output.
+ ltdc has one video port with up to 2 endpoints:
+ - for external dpi rgb panel or bridge, using gpios.
+ - for internal dpi input of the MIPI DSI host controller.
+ Note: These 2 endpoints cannot be activated simultaneously.
+ Please refer to the bindings defined in
+ Documentation/devicetree/bindings/media/video-interfaces.txt."
+
+ dma-ranges:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+ - resets
+ - port
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/stm32mp1-clks.h>
+ #include <dt-bindings/reset/stm32mp1-resets.h>
+ ltdc: display-controller@...16800 {
+ compatible = "st,stm32-ltdc";
+ reg = <0x5a001000 0x400>;
+ interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc LTDC_PX>;
+ clock-names = "lcd";
+ resets = <&rcc LTDC_R>;
+
+ port {
+ ltdc_out_dsi: endpoint {
+ remote-endpoint = <&dsi_in>;
+ };
+ };
+ };
+
+...
+
--
2.15.0
Powered by blists - more mailing lists