| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Sat, 19 Oct 2019 16:20:07 +0200
From: Lubomir Rintel <lkundrak@...sk>
To: Arnd Bergmann <arnd@...db.de>, Daniel Mack <daniel@...que.org>,
Haojian Zhuang <haojian.zhuang@...il.com>,
Robert Jarzmik <robert.jarzmik@...e.fr>
Cc: linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
Linus Walleij <linus.walleij@...aro.org>
Subject: Re: [PATCH 44/46] ARM: mmp: remove tavorevb board support
On Fri, 2019-10-18 at 17:41 +0200, Arnd Bergmann wrote:
> There are two tavorevb boards in the kernel, one using a PXA930 chip in
> mach-pxa, and one using the later PXA910 chip in mach-mmp. They use the
> same board number, which is generally a bad idea, and in a multiplatform
> kernel, we can end up with funny link errors like this one resulting
> from two boards gettting controlled by the same Kconfig symbol:
>
> arch/arm/mach-mmp/tavorevb.o: In function `tavorevb_init':
> tavorevb.c:(.init.text+0x4c): undefined reference to `pxa910_device_uart1'
> tavorevb.c:(.init.text+0x50): undefined reference to `pxa910_device_gpio'
> tavorevb.o:(.arch.info.init+0x54): undefined reference to `pxa910_init_irq'
> tavorevb.o:(.arch.info.init+0x58): undefined reference to `pxa910_timer_init'
>
> The mach-pxa TavorEVB seems much more complete than the mach-mmp one
> that supports only uart, gpio and ethernet. Further, I could find no
> information about the board on the internet aside from references to
> the Linux kernel, so I assume this was never available outside of Marvell
> and can be removed entirely.
>
> There is a third board named TavorEVB in the Kconfig description,
> but this refers to the "TTC_DKB" machine. The two are clearly
> related, so I change the Kconfig description to just list both
> names.
>
> Cc: Lubomir Rintel <lkundrak@...sk>
> Signed-off-by: Arnd Bergmann <arnd@...db.de>
Reviewed-by: Lubomir Rintel <lkundrak@...sk>
In fact, I'd love to see more non-DT boards go from mach-mmp. There are
good indications nobody is looking after MMP2-based "Jasper", "Flint"
and "Brownstone" and they probably weren't seen outside Marvell either.
The latter has a DTS file.
Would anybody miss them?
Thanks
Lubo
> ---
> arch/arm/mach-mmp/Kconfig | 10 +---
> arch/arm/mach-mmp/Makefile | 1 -
> arch/arm/mach-mmp/tavorevb.c | 113 -----------------------------------
> 3 files changed, 1 insertion(+), 123 deletions(-)
> delete mode 100644 arch/arm/mach-mmp/tavorevb.c
>
> diff --git a/arch/arm/mach-mmp/Kconfig b/arch/arm/mach-mmp/Kconfig
> index 0440109e973b..fc8cbe0064ae 100644
> --- a/arch/arm/mach-mmp/Kconfig
> +++ b/arch/arm/mach-mmp/Kconfig
> @@ -39,16 +39,8 @@ config MACH_AVENGERS_LITE
> Say 'Y' here if you want to support the Marvell PXA168-based
> Avengers Lite Development Board.
>
> -config MACH_TAVOREVB
> - bool "Marvell's PXA910 TavorEVB Development Board"
> - depends on ARCH_MULTI_V5
> - select CPU_PXA910
> - help
> - Say 'Y' here if you want to support the Marvell PXA910-based
> - TavorEVB Development Board.
> -
> config MACH_TTC_DKB
> - bool "Marvell's PXA910 TavorEVB Development Board"
> + bool "Marvell's PXA910 TavorEVB/TTC_DKB Development Board"
> depends on ARCH_MULTI_V5
> select CPU_PXA910
> help
> diff --git a/arch/arm/mach-mmp/Makefile b/arch/arm/mach-mmp/Makefile
> index 8f267c7bc6e8..0dc07e1f3196 100644
> --- a/arch/arm/mach-mmp/Makefile
> +++ b/arch/arm/mach-mmp/Makefile
> @@ -27,7 +27,6 @@ endif
> obj-$(CONFIG_MACH_ASPENITE) += aspenite.o
> obj-$(CONFIG_MACH_ZYLONITE2) += aspenite.o
> obj-$(CONFIG_MACH_AVENGERS_LITE)+= avengers_lite.o
> -obj-$(CONFIG_MACH_TAVOREVB) += tavorevb.o
> obj-$(CONFIG_MACH_TTC_DKB) += ttc_dkb.o
> obj-$(CONFIG_MACH_BROWNSTONE) += brownstone.o
> obj-$(CONFIG_MACH_FLINT) += flint.o
> diff --git a/arch/arm/mach-mmp/tavorevb.c b/arch/arm/mach-mmp/tavorevb.c
> deleted file mode 100644
> index 3261d2322198..000000000000
> --- a/arch/arm/mach-mmp/tavorevb.c
> +++ /dev/null
> @@ -1,113 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0-only
> -/*
> - * linux/arch/arm/mach-mmp/tavorevb.c
> - *
> - * Support for the Marvell PXA910-based TavorEVB Development Platform.
> - */
> -#include <linux/gpio.h>
> -#include <linux/gpio-pxa.h>
> -#include <linux/init.h>
> -#include <linux/kernel.h>
> -#include <linux/platform_device.h>
> -#include <linux/smc91x.h>
> -
> -#include <asm/mach-types.h>
> -#include <asm/mach/arch.h>
> -#include "addr-map.h"
> -#include "mfp-pxa910.h"
> -#include "pxa910.h"
> -#include "irqs.h"
> -
> -#include "common.h"
> -
> -static unsigned long tavorevb_pin_config[] __initdata = {
> - /* UART2 */
> - GPIO47_UART2_RXD,
> - GPIO48_UART2_TXD,
> -
> - /* SMC */
> - SM_nCS0_nCS0,
> - SM_ADV_SM_ADV,
> - SM_SCLK_SM_SCLK,
> - SM_SCLK_SM_SCLK,
> - SM_BE0_SM_BE0,
> - SM_BE1_SM_BE1,
> -
> - /* DFI */
> - DF_IO0_ND_IO0,
> - DF_IO1_ND_IO1,
> - DF_IO2_ND_IO2,
> - DF_IO3_ND_IO3,
> - DF_IO4_ND_IO4,
> - DF_IO5_ND_IO5,
> - DF_IO6_ND_IO6,
> - DF_IO7_ND_IO7,
> - DF_IO8_ND_IO8,
> - DF_IO9_ND_IO9,
> - DF_IO10_ND_IO10,
> - DF_IO11_ND_IO11,
> - DF_IO12_ND_IO12,
> - DF_IO13_ND_IO13,
> - DF_IO14_ND_IO14,
> - DF_IO15_ND_IO15,
> - DF_nCS0_SM_nCS2_nCS0,
> - DF_ALE_SM_WEn_ND_ALE,
> - DF_CLE_SM_OEn_ND_CLE,
> - DF_WEn_DF_WEn,
> - DF_REn_DF_REn,
> - DF_RDY0_DF_RDY0,
> -};
> -
> -static struct pxa_gpio_platform_data pxa910_gpio_pdata = {
> - .irq_base = MMP_GPIO_TO_IRQ(0),
> -};
> -
> -static struct smc91x_platdata tavorevb_smc91x_info = {
> - .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
> -};
> -
> -static struct resource smc91x_resources[] = {
> - [0] = {
> - .start = SMC_CS1_PHYS_BASE + 0x300,
> - .end = SMC_CS1_PHYS_BASE + 0xfffff,
> - .flags = IORESOURCE_MEM,
> - },
> - [1] = {
> - .start = MMP_GPIO_TO_IRQ(80),
> - .end = MMP_GPIO_TO_IRQ(80),
> - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
> - }
> -};
> -
> -static struct platform_device smc91x_device = {
> - .name = "smc91x",
> - .id = 0,
> - .dev = {
> - .platform_data = &tavorevb_smc91x_info,
> - },
> - .num_resources = ARRAY_SIZE(smc91x_resources),
> - .resource = smc91x_resources,
> -};
> -
> -static void __init tavorevb_init(void)
> -{
> - mfp_config(ARRAY_AND_SIZE(tavorevb_pin_config));
> -
> - /* on-chip devices */
> - pxa910_add_uart(1);
> - platform_device_add_data(&pxa910_device_gpio, &pxa910_gpio_pdata,
> - sizeof(struct pxa_gpio_platform_data));
> - platform_device_register(&pxa910_device_gpio);
> -
> - /* off-chip devices */
> - platform_device_register(&smc91x_device);
> -}
> -
> -MACHINE_START(TAVOREVB, "PXA910 Evaluation Board (aka TavorEVB)")
> - .map_io = mmp_map_io,
> - .nr_irqs = MMP_NR_IRQS,
> - .init_irq = pxa910_init_irq,
> - .init_time = pxa910_timer_init,
> - .init_machine = tavorevb_init,
> - .restart = mmp_restart,
> -MACHINE_END
Powered by blists - more mailing lists