| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20191021065522.24511-9-rnayak@codeaurora.org>
Date: Mon, 21 Oct 2019 12:25:17 +0530
From: Rajendra Nayak <rnayak@...eaurora.org>
To: agross@...nel.org, robh+dt@...nel.org, bjorn.andersson@...aro.org
Cc: linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, Kiran Gunda <kgunda@...eaurora.org>,
Rajendra Nayak <rnayak@...eaurora.org>
Subject: [PATCH v2 08/13] arm64: dts: qcom: pm6150: Add PM6150/PM6150L PMIC peripherals
From: Kiran Gunda <kgunda@...eaurora.org>
Add PM6150/PM6150L peripherals such as PON, GPIOs, ADC and other
PMIC infra modules.
Signed-off-by: Kiran Gunda <kgunda@...eaurora.org>
Signed-off-by: Rajendra Nayak <rnayak@...eaurora.org>
---
v2:
* Changed to BSD-3-Clause licence
* Included headers in sc7180-idp.dts
arch/arm64/boot/dts/qcom/pm6150.dtsi | 85 +++++++++++++++++++++++++
arch/arm64/boot/dts/qcom/pm6150l.dtsi | 47 ++++++++++++++
arch/arm64/boot/dts/qcom/sc7180-idp.dts | 2 +
3 files changed, 134 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/pm6150.dtsi
create mode 100644 arch/arm64/boot/dts/qcom/pm6150l.dtsi
diff --git a/arch/arm64/boot/dts/qcom/pm6150.dtsi b/arch/arm64/boot/dts/qcom/pm6150.dtsi
new file mode 100644
index 000000000000..20eb928e5ce3
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm6150.dtsi
@@ -0,0 +1,85 @@
+// SPDX-License-Identifier: BSD-3-Clause
+// Copyright (c) 2019, The Linux Foundation. All rights reserved.
+
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+#include <dt-bindings/thermal/thermal.h>
+
+&spmi_bus {
+ pm6150_lsid0: pmic@0 {
+ compatible = "qcom,pm6150", "qcom,spmi-pmic";
+ reg = <0x0 SPMI_USID>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pm6150_pon: pon@800 {
+ compatible = "qcom,pm8998-pon";
+ reg = <0x800>;
+ mode-bootloader = <0x2>;
+ mode-recovery = <0x1>;
+
+ pwrkey {
+ compatible = "qcom,pm8941-pwrkey";
+ interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
+ debounce = <15625>;
+ bias-pull-up;
+ linux,code = <KEY_POWER>;
+ };
+ };
+
+ pm6150_temp: temp-alarm@...0 {
+ compatible = "qcom,spmi-temp-alarm";
+ reg = <0x2400>;
+ interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>;
+ io-channels = <&pm6150_adc ADC5_DIE_TEMP>;
+ io-channel-names = "thermal";
+ #thermal-sensor-cells = <0>;
+ };
+
+ pm6150_adc: adc@...0 {
+ compatible = "qcom,spmi-adc5";
+ reg = <0x3100>;
+ interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #io-channel-cells = <1>;
+
+ adc-chan@...5_DIE_TEMP {
+ reg = <ADC5_DIE_TEMP>;
+ label = "die_temp";
+ };
+ };
+
+ pm6150_gpio: gpios@...0 {
+ compatible = "qcom,pm6150-gpio", "qcom,spmi-gpio";
+ reg = <0xc000 0xa00>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupts = <0 0xc0 0 IRQ_TYPE_NONE>,
+ <0 0xc1 0 IRQ_TYPE_NONE>,
+ <0 0xc2 0 IRQ_TYPE_NONE>,
+ <0 0xc3 0 IRQ_TYPE_NONE>,
+ <0 0xc4 0 IRQ_TYPE_NONE>,
+ <0 0xc5 0 IRQ_TYPE_NONE>,
+ <0 0xc6 0 IRQ_TYPE_NONE>,
+ <0 0xc7 0 IRQ_TYPE_NONE>,
+ <0 0xc8 0 IRQ_TYPE_NONE>,
+ <0 0xc9 0 IRQ_TYPE_NONE>;
+
+ interrupt-names = "pm6150_gpio1", "pm6150_gpio2",
+ "pm6150_gpio3", "pm6150_gpio4",
+ "pm6150_gpio5", "pm6150_gpio6",
+ "pm6150_gpio7", "pm6150_gpio8",
+ "pm6150_gpio9", "pm6150_gpio10";
+ };
+ };
+
+ pm6150_lsid1: pmic@1 {
+ compatible = "qcom,pm6150", "qcom,spmi-pmic";
+ reg = <0x1 SPMI_USID>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+};
diff --git a/arch/arm64/boot/dts/qcom/pm6150l.dtsi b/arch/arm64/boot/dts/qcom/pm6150l.dtsi
new file mode 100644
index 000000000000..b17bb1af9367
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm6150l.dtsi
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: BSD-3-Clause
+// Copyright (c) 2019, The Linux Foundation. All rights reserved.
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+&spmi_bus {
+ pm6150l_lsid4: pmic@4 {
+ compatible = "qcom,pm6150l", "qcom,spmi-pmic";
+ reg = <0x4 SPMI_USID>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pm6150l_gpios: gpios@...0 {
+ compatible = "qcom,pm6150l-gpio", "qcom,spmi-gpio";
+ reg = <0xc000 0xc00>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupts = <4 0xc0 0 IRQ_TYPE_NONE>,
+ <4 0xc1 0 IRQ_TYPE_NONE>,
+ <4 0xc2 0 IRQ_TYPE_NONE>,
+ <4 0xc3 0 IRQ_TYPE_NONE>,
+ <4 0xc4 0 IRQ_TYPE_NONE>,
+ <4 0xc5 0 IRQ_TYPE_NONE>,
+ <4 0xc6 0 IRQ_TYPE_NONE>,
+ <4 0xc7 0 IRQ_TYPE_NONE>,
+ <4 0xc8 0 IRQ_TYPE_NONE>,
+ <4 0xc9 0 IRQ_TYPE_NONE>,
+ <4 0xca 0 IRQ_TYPE_NONE>,
+ <4 0xcb 0 IRQ_TYPE_NONE>;
+
+ interrupt-names = "pm6150l_gpio1", "pm6150l_gpio2",
+ "pm6150l_gpio3", "pm6150l_gpio4",
+ "pm6150l_gpio5", "pm6150l_gpio6",
+ "pm6150l_gpio7", "pm6150l_gpio8",
+ "pm6150l_gpio9", "pm6150l_gpio10",
+ "pm6150l_gpio11", "pm6150l_gpio12";
+ };
+ };
+
+ pm6150l_lsid5: pmic@5 {
+ compatible = "qcom,pm6150l", "qcom,spmi-pmic";
+ reg = <0x5 SPMI_USID>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-idp.dts b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
index f8b7e098f5b4..1ba389f1fea9 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-idp.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
@@ -8,6 +8,8 @@
/dts-v1/;
#include "sc7180.dtsi"
+#include "pm6150.dtsi"
+#include "pm6150l.dtsi"
/ {
model = "Qualcomm Technologies, Inc. SC7180 IDP";
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
Powered by blists - more mailing lists