| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20191021051322.297560-8-bjorn.andersson@linaro.org>
Date: Sun, 20 Oct 2019 22:13:18 -0700
From: Bjorn Andersson <bjorn.andersson@...aro.org>
To: Andy Gross <agross@...nel.org>, Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>
Cc: linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: [PATCH 07/11] arm64: dts: qcom: db820c: Remove pin specific files
Rather than scattering pinctrl definitions in various files, merge the
nodes into db820c.dtsi to make it easier to navigate.
Signed-off-by: Bjorn Andersson <bjorn.andersson@...aro.org>
---
.../boot/dts/qcom/apq8096-db820c-pins.dtsi | 109 ----------
.../dts/qcom/apq8096-db820c-pmic-pins.dtsi | 92 ---------
arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi | 192 +++++++++++++++++-
3 files changed, 190 insertions(+), 203 deletions(-)
delete mode 100644 arch/arm64/boot/dts/qcom/apq8096-db820c-pins.dtsi
delete mode 100644 arch/arm64/boot/dts/qcom/apq8096-db820c-pmic-pins.dtsi
diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c-pins.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c-pins.dtsi
deleted file mode 100644
index a5cc80d6e82f..000000000000
--- a/arch/arm64/boot/dts/qcom/apq8096-db820c-pins.dtsi
+++ /dev/null
@@ -1,109 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (c) 2013-2016, The Linux Foundation. All rights reserved.
- */
-&msmgpio {
- sdc2_cd_on: sdc2_cd_on {
- mux {
- pins = "gpio38";
- function = "gpio";
- };
-
- config {
- pins = "gpio38";
- bias-pull-up; /* pull up */
- drive-strength = <16>; /* 16 MA */
- };
- };
-
- sdc2_cd_off: sdc2_cd_off {
- mux {
- pins = "gpio38";
- function = "gpio";
- };
-
- config {
- pins = "gpio38";
- bias-pull-up; /* pull up */
- drive-strength = <2>; /* 2 MA */
- };
- };
-
- blsp1_uart1_default: blsp1_uart1_default {
- mux {
- pins = "gpio41", "gpio42", "gpio43", "gpio44";
- function = "blsp_uart2";
- };
-
- config {
- pins = "gpio41", "gpio42", "gpio43", "gpio44";
- drive-strength = <16>;
- bias-disable;
- };
- };
-
- blsp1_uart1_sleep: blsp1_uart1_sleep {
- mux {
- pins = "gpio41", "gpio42", "gpio43", "gpio44";
- function = "gpio";
- };
-
- config {
- pins = "gpio41", "gpio42", "gpio43", "gpio44";
- drive-strength = <2>;
- bias-disable;
- };
- };
-
- hdmi_hpd_active: hdmi_hpd_active {
- mux {
- pins = "gpio34";
- function = "hdmi_hot";
- };
-
- config {
- pins = "gpio34";
- bias-pull-down;
- drive-strength = <16>;
- };
- };
-
- hdmi_hpd_suspend: hdmi_hpd_suspend {
- mux {
- pins = "gpio34";
- function = "hdmi_hot";
- };
-
- config {
- pins = "gpio34";
- bias-pull-down;
- drive-strength = <2>;
- };
- };
-
- hdmi_ddc_active: hdmi_ddc_active {
- mux {
- pins = "gpio32", "gpio33";
- function = "hdmi_ddc";
- };
-
- config {
- pins = "gpio32", "gpio33";
- drive-strength = <2>;
- bias-pull-up;
- };
- };
-
- hdmi_ddc_suspend: hdmi_ddc_suspend {
- mux {
- pins = "gpio32", "gpio33";
- function = "hdmi_ddc";
- };
-
- config {
- pins = "gpio32", "gpio33";
- drive-strength = <2>;
- bias-pull-down;
- };
- };
-};
diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c-pmic-pins.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c-pmic-pins.dtsi
deleted file mode 100644
index 31a3e3311ad5..000000000000
--- a/arch/arm64/boot/dts/qcom/apq8096-db820c-pmic-pins.dtsi
+++ /dev/null
@@ -1,92 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-
-#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
-&pm8994_gpios {
-
- pinctrl-names = "default";
- pinctrl-0 = <&ls_exp_gpio_f &bt_en_gpios>;
-
- ls_exp_gpio_f: pm8994_gpio5 {
- pinconf {
- pins = "gpio5";
- output-low;
- power-source = <2>; // PM8994_GPIO_S4, 1.8V
- };
- };
-
- bt_en_gpios: bt_en_gpios {
- pinconf {
- pins = "gpio19";
- function = PMIC_GPIO_FUNC_NORMAL;
- output-low;
- power-source = <PM8994_GPIO_S4>; // 1.8V
- qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
- bias-pull-down;
- };
- };
-
- wlan_en_gpios: wlan_en_gpios {
- pinconf {
- pins = "gpio8";
- function = PMIC_GPIO_FUNC_NORMAL;
- output-low;
- power-source = <PM8994_GPIO_S4>; // 1.8V
- qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
- bias-pull-down;
- };
- };
-
- audio_mclk: clk_div1 {
- pinconf {
- pins = "gpio15";
- function = "func1";
- power-source = <PM8994_GPIO_S4>; // 1.8V
- };
- };
-
- volume_up_gpio: pm8996_gpio2 {
- pinconf {
- pins = "gpio2";
- function = "normal";
- input-enable;
- drive-push-pull;
- bias-pull-up;
- qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
- power-source = <PM8994_GPIO_S4>; // 1.8V
- };
- };
-
- divclk4_pin_a: divclk4 {
- pinconf {
- pins = "gpio18";
- function = PMIC_GPIO_FUNC_FUNC2;
-
- bias-disable;
- power-source = <PM8994_GPIO_S4>;
- };
- };
-
- usb3_vbus_det_gpio: pm8996_gpio22 {
- pinconf {
- pins = "gpio22";
- function = PMIC_GPIO_FUNC_NORMAL;
- input-enable;
- bias-pull-down;
- qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
- power-source = <PM8994_GPIO_S4>; // 1.8V
- };
- };
-};
-
-&pmi8994_gpios {
- usb2_vbus_det_gpio: pmi8996_gpio6 {
- pinconf {
- pins = "gpio6";
- function = PMIC_GPIO_FUNC_NORMAL;
- input-enable;
- bias-pull-down;
- qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
- power-source = <PM8994_GPIO_S4>; // 1.8V
- };
- };
-};
diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
index 99990a139938..6c64deecf950 100644
--- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
@@ -6,10 +6,9 @@
#include "msm8996.dtsi"
#include "pm8994.dtsi"
#include "pmi8994.dtsi"
-#include "apq8096-db820c-pins.dtsi"
-#include "apq8096-db820c-pmic-pins.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
#include <dt-bindings/sound/qcom,q6afe.h>
#include <dt-bindings/sound/qcom,q6asm.h>
@@ -384,6 +383,110 @@
"NC", /* GPIO_147 */
"NC", /* GPIO_148 */
"NC"; /* GPIO_149 */
+
+ sdc2_cd_on: sdc2_cd_on {
+ mux {
+ pins = "gpio38";
+ function = "gpio";
+ };
+
+ config {
+ pins = "gpio38";
+ bias-pull-up; /* pull up */
+ drive-strength = <16>; /* 16 MA */
+ };
+ };
+
+ sdc2_cd_off: sdc2_cd_off {
+ mux {
+ pins = "gpio38";
+ function = "gpio";
+ };
+
+ config {
+ pins = "gpio38";
+ bias-pull-up; /* pull up */
+ drive-strength = <2>; /* 2 MA */
+ };
+ };
+
+ blsp1_uart1_default: blsp1_uart1_default {
+ mux {
+ pins = "gpio41", "gpio42", "gpio43", "gpio44";
+ function = "blsp_uart2";
+ };
+
+ config {
+ pins = "gpio41", "gpio42", "gpio43", "gpio44";
+ drive-strength = <16>;
+ bias-disable;
+ };
+ };
+
+ blsp1_uart1_sleep: blsp1_uart1_sleep {
+ mux {
+ pins = "gpio41", "gpio42", "gpio43", "gpio44";
+ function = "gpio";
+ };
+
+ config {
+ pins = "gpio41", "gpio42", "gpio43", "gpio44";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ hdmi_hpd_active: hdmi_hpd_active {
+ mux {
+ pins = "gpio34";
+ function = "hdmi_hot";
+ };
+
+ config {
+ pins = "gpio34";
+ bias-pull-down;
+ drive-strength = <16>;
+ };
+ };
+
+ hdmi_hpd_suspend: hdmi_hpd_suspend {
+ mux {
+ pins = "gpio34";
+ function = "hdmi_hot";
+ };
+
+ config {
+ pins = "gpio34";
+ bias-pull-down;
+ drive-strength = <2>;
+ };
+ };
+
+ hdmi_ddc_active: hdmi_ddc_active {
+ mux {
+ pins = "gpio32", "gpio33";
+ function = "hdmi_ddc";
+ };
+
+ config {
+ pins = "gpio32", "gpio33";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ hdmi_ddc_suspend: hdmi_ddc_suspend {
+ mux {
+ pins = "gpio32", "gpio33";
+ function = "hdmi_ddc";
+ };
+
+ config {
+ pins = "gpio32", "gpio33";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+ };
};
&pcie0 {
@@ -436,6 +539,80 @@
"PMIC_SLB",
"PMIC_BUA",
"USB_VBUS_DET";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&ls_exp_gpio_f &bt_en_gpios>;
+
+ ls_exp_gpio_f: pm8994_gpio5 {
+ pinconf {
+ pins = "gpio5";
+ output-low;
+ power-source = <2>; // PM8994_GPIO_S4, 1.8V
+ };
+ };
+
+ bt_en_gpios: bt_en_gpios {
+ pinconf {
+ pins = "gpio19";
+ function = PMIC_GPIO_FUNC_NORMAL;
+ output-low;
+ power-source = <PM8994_GPIO_S4>; // 1.8V
+ qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+ bias-pull-down;
+ };
+ };
+
+ wlan_en_gpios: wlan_en_gpios {
+ pinconf {
+ pins = "gpio8";
+ function = PMIC_GPIO_FUNC_NORMAL;
+ output-low;
+ power-source = <PM8994_GPIO_S4>; // 1.8V
+ qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+ bias-pull-down;
+ };
+ };
+
+ audio_mclk: clk_div1 {
+ pinconf {
+ pins = "gpio15";
+ function = "func1";
+ power-source = <PM8994_GPIO_S4>; // 1.8V
+ };
+ };
+
+ volume_up_gpio: pm8996_gpio2 {
+ pinconf {
+ pins = "gpio2";
+ function = "normal";
+ input-enable;
+ drive-push-pull;
+ bias-pull-up;
+ qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+ power-source = <PM8994_GPIO_S4>; // 1.8V
+ };
+ };
+
+ divclk4_pin_a: divclk4 {
+ pinconf {
+ pins = "gpio18";
+ function = PMIC_GPIO_FUNC_FUNC2;
+
+ bias-disable;
+ power-source = <PM8994_GPIO_S4>;
+ };
+ };
+
+ usb3_vbus_det_gpio: pm8996_gpio22 {
+ pinconf {
+ pins = "gpio22";
+ function = PMIC_GPIO_FUNC_NORMAL;
+ input-enable;
+ bias-pull-down;
+ qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+ power-source = <PM8994_GPIO_S4>; // 1.8V
+ };
+ };
};
&pm8994_mpps {
@@ -462,6 +639,17 @@
"NC",
"NC",
"NC";
+
+ usb2_vbus_det_gpio: pmi8996_gpio6 {
+ pinconf {
+ pins = "gpio6";
+ function = PMIC_GPIO_FUNC_NORMAL;
+ input-enable;
+ bias-pull-down;
+ qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+ power-source = <PM8994_GPIO_S4>; // 1.8V
+ };
+ };
};
&rpm_requests {
--
2.23.0
Powered by blists - more mailing lists