| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20191021051322.297560-3-bjorn.andersson@linaro.org>
Date: Sun, 20 Oct 2019 22:13:13 -0700
From: Bjorn Andersson <bjorn.andersson@...aro.org>
To: Andy Gross <agross@...nel.org>, Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>
Cc: linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: [PATCH 02/11] arm64: dts: qcom: msm8996: Use node references in db820c
Instead of mimicing the structure of the platform, reference nodes by
their label in apq8096-db820c.dtsi. Add labels in msm8996.dtsi where
necessary.
Signed-off-by: Bjorn Andersson <bjorn.andersson@...aro.org>
---
arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi | 691 +++++++++----------
arch/arm64/boot/dts/qcom/msm8996.dtsi | 4 +-
2 files changed, 341 insertions(+), 354 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
index da2f01eb3be2..44ec3eb1c8e8 100644
--- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
@@ -77,396 +77,383 @@
enable-gpios = <&pm8994_gpios 15 0>;
};
};
+};
- soc {
- serial@...0000 {
- label = "BT-UART";
- status = "okay";
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&blsp1_uart1_default>;
- pinctrl-1 = <&blsp1_uart1_sleep>;
+&blsp1_uart1 {
+ label = "BT-UART";
+ status = "okay";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&blsp1_uart1_default>;
+ pinctrl-1 = <&blsp1_uart1_sleep>;
- bluetooth {
- compatible = "qcom,qca6174-bt";
+ bluetooth {
+ compatible = "qcom,qca6174-bt";
- /* bt_disable_n gpio */
- enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>;
+ /* bt_disable_n gpio */
+ enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>;
- clocks = <&divclk4>;
- };
- };
+ clocks = <&divclk4>;
+ };
+};
- serial@...0000 {
- label = "LS-UART1";
- status = "okay";
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&blsp2_uart1_2pins_default>;
- pinctrl-1 = <&blsp2_uart1_2pins_sleep>;
- };
+&blsp2_uart1 {
+ label = "LS-UART1";
+ status = "okay";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&blsp2_uart1_2pins_default>;
+ pinctrl-1 = <&blsp2_uart1_2pins_sleep>;
+};
- serial@...1000 {
- label = "LS-UART0";
- status = "disabled";
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&blsp2_uart2_4pins_default>;
- pinctrl-1 = <&blsp2_uart2_4pins_sleep>;
- };
+&blsp2_uart2 {
+ label = "LS-UART0";
+ status = "disabled";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&blsp2_uart2_4pins_default>;
+ pinctrl-1 = <&blsp2_uart2_4pins_sleep>;
+};
- i2c@...7000 {
- /* On Low speed expansion */
- label = "LS-I2C0";
- status = "okay";
- };
+&blsp1_i2c2 {
+ /* On Low speed expansion */
+ label = "LS-I2C0";
+ status = "okay";
+};
- i2c@...6000 {
- /* On Low speed expansion */
- label = "LS-I2C1";
- status = "okay";
- };
+&blsp2_i2c1 {
+ /* On Low speed expansion */
+ label = "LS-I2C1";
+ status = "okay";
+};
- spi@...5000 {
- /* On Low speed expansion */
- label = "LS-SPI0";
- status = "okay";
- };
+&blsp1_spi0 {
+ /* On Low speed expansion */
+ label = "LS-SPI0";
+ status = "okay";
+};
- i2c@...5000 {
- /* On High speed expansion */
- label = "HS-I2C2";
- status = "okay";
- };
+&blsp2_i2c0 {
+ /* On High speed expansion */
+ label = "HS-I2C2";
+ status = "okay";
+};
- spi@...a000{
- /* On High speed expansion */
- label = "HS-SPI1";
- status = "okay";
- };
+&blsp2_spi5 {
+ /* On High speed expansion */
+ label = "HS-SPI1";
+ status = "okay";
+};
- sdhci@...4900 {
- /* External SD card */
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
- pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
- cd-gpios = <&msmgpio 38 0x1>;
- vmmc-supply = <&pm8994_l21>;
- vqmmc-supply = <&pm8994_l13>;
- status = "okay";
- };
+&sdhc2 {
+ /* External SD card */
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
+ pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
+ cd-gpios = <&msmgpio 38 0x1>;
+ vmmc-supply = <&pm8994_l21>;
+ vqmmc-supply = <&pm8994_l13>;
+ status = "okay";
+};
- phy@...000 {
- status = "okay";
- };
+&ufsphy {
+ status = "okay";
+};
- ufshc@...000 {
- status = "okay";
- };
+&ufshc {
+ status = "okay";
+};
- pinctrl@...0000 {
- gpio-line-names =
- "[SPI0_DOUT]", /* GPIO_0, BLSP1_SPI_MOSI, LSEC pin 14 */
- "[SPI0_DIN]", /* GPIO_1, BLSP1_SPI_MISO, LSEC pin 10 */
- "[SPI0_CS]", /* GPIO_2, BLSP1_SPI_CS_N, LSEC pin 12 */
- "[SPI0_SCLK]", /* GPIO_3, BLSP1_SPI_CLK, LSEC pin 8 */
- "[UART1_TxD]", /* GPIO_4, BLSP8_UART_TX, LSEC pin 11 */
- "[UART1_RxD]", /* GPIO_5, BLSP8_UART_RX, LSEC pin 13 */
- "[I2C1_SDA]", /* GPIO_6, BLSP8_I2C_SDA, LSEC pin 21 */
- "[I2C1_SCL]", /* GPIO_7, BLSP8_I2C_SCL, LSEC pin 19 */
- "GPIO-H", /* GPIO_8, LCD0_RESET_N, LSEC pin 30 */
- "TP93", /* GPIO_9 */
- "GPIO-G", /* GPIO_10, MDP_VSYNC_P, LSEC pin 29 */
- "[MDP_VSYNC_S]", /* GPIO_11, S HSEC pin 55 */
- "NC", /* GPIO_12 */
- "[CSI0_MCLK]", /* GPIO_13, CAM_MCLK0, P HSEC pin 15 */
- "[CAM_MCLK1]", /* GPIO_14, J14 pin 11 */
- "[CSI1_MCLK]", /* GPIO_15, CAM_MCLK2, P HSEC pin 17 */
- "TP99", /* GPIO_16 */
- "[I2C2_SDA]", /* GPIO_17, CCI_I2C_SDA0, P HSEC pin 34 */
- "[I2C2_SCL]", /* GPIO_18, CCI_I2C_SCL0, P HSEC pin 32 */
- "[CCI_I2C_SDA1]", /* GPIO_19, S HSEC pin 38 */
- "[CCI_I2C_SCL1]", /* GPIO_20, S HSEC pin 36 */
- "FLASH_STROBE_EN", /* GPIO_21, S HSEC pin 5 */
- "FLASH_STROBE_TRIG", /* GPIO_22, S HSEC pin 1 */
- "GPIO-K", /* GPIO_23, CAM2_RST_N, LSEC pin 33 */
- "GPIO-D", /* GPIO_24, LSEC pin 26 */
- "GPIO-I", /* GPIO_25, CAM0_RST_N, LSEC pin 31 */
- "GPIO-J", /* GPIO_26, CAM0_STANDBY_N, LSEC pin 32 */
- "BLSP6_I2C_SDA", /* GPIO_27 */
- "BLSP6_I2C_SCL", /* GPIO_28 */
- "GPIO-B", /* GPIO_29, TS0_RESET_N, LSEC pin 24 */
- "GPIO30", /* GPIO_30, S HSEC pin 4 */
- "HDMI_CEC", /* GPIO_31 */
- "HDMI_DDC_CLOCK", /* GPIO_32 */
- "HDMI_DDC_DATA", /* GPIO_33 */
- "HDMI_HOT_PLUG_DETECT", /* GPIO_34 */
- "PCIE0_RST_N", /* GPIO_35 */
- "PCIE0_CLKREQ_N", /* GPIO_36 */
- "PCIE0_WAKE", /* GPIO_37 */
- "SD_CARD_DET_N", /* GPIO_38 */
- "TSIF1_SYNC", /* GPIO_39, S HSEC pin 48 */
- "W_DISABLE_N", /* GPIO_40 */
- "[BLSP9_UART_TX]", /* GPIO_41 */
- "[BLSP9_UART_RX]", /* GPIO_42 */
- "[BLSP2_UART_CTS_N]", /* GPIO_43 */
- "[BLSP2_UART_RFR_N]", /* GPIO_44 */
- "[BLSP3_UART_TX]", /* GPIO_45 */
- "[BLSP3_UART_RX]", /* GPIO_46 */
- "[I2C0_SDA]", /* GPIO_47, LS_I2C0_SDA, LSEC pin 17 */
- "[I2C0_SCL]", /* GPIO_48, LS_I2C0_SCL, LSEC pin 15 */
- "[UART0_TxD]", /* GPIO_49, BLSP9_UART_TX, LSEC pin 5 */
- "[UART0_RxD]", /* GPIO_50, BLSP9_UART_RX, LSEC pin 7 */
- "[UART0_CTS]", /* GPIO_51, BLSP9_UART_CTS_N, LSEC pin 3 */
- "[UART0_RTS]", /* GPIO_52, BLSP9_UART_RFR_N, LSEC pin 9 */
- "[CODEC_INT1_N]", /* GPIO_53 */
- "[CODEC_INT2_N]", /* GPIO_54 */
- "[BLSP7_I2C_SDA]", /* GPIO_55 */
- "[BLSP7_I2C_SCL]", /* GPIO_56 */
- "MI2S_MCLK", /* GPIO_57, S HSEC pin 3 */
- "[PCM_CLK]", /* GPIO_58, QUA_MI2S_SCK, LSEC pin 18 */
- "[PCM_FS]", /* GPIO_59, QUA_MI2S_WS, LSEC pin 16 */
- "[PCM_DO]", /* GPIO_60, QUA_MI2S_DATA0, LSEC pin 20 */
- "[PCM_DI]", /* GPIO_61, QUA_MI2S_DATA1, LSEC pin 22 */
- "GPIO-E", /* GPIO_62, LSEC pin 27 */
- "TP87", /* GPIO_63 */
- "[CODEC_RST_N]", /* GPIO_64 */
- "[PCM1_CLK]", /* GPIO_65 */
- "[PCM1_SYNC]", /* GPIO_66 */
- "[PCM1_DIN]", /* GPIO_67 */
- "[PCM1_DOUT]", /* GPIO_68 */
- "AUDIO_REF_CLK", /* GPIO_69 */
- "SLIMBUS_CLK", /* GPIO_70 */
- "SLIMBUS_DATA0", /* GPIO_71 */
- "SLIMBUS_DATA1", /* GPIO_72 */
- "NC", /* GPIO_73 */
- "NC", /* GPIO_74 */
- "NC", /* GPIO_75 */
- "NC", /* GPIO_76 */
- "TP94", /* GPIO_77 */
- "NC", /* GPIO_78 */
- "TP95", /* GPIO_79 */
- "GPIO-A", /* GPIO_80, MEMS_RESET_N, LSEC pin 23 */
- "TP88", /* GPIO_81 */
- "TP89", /* GPIO_82 */
- "TP90", /* GPIO_83 */
- "TP91", /* GPIO_84 */
- "[SD_DAT0]", /* GPIO_85, BLSP12_SPI_MOSI, P HSEC pin 1 */
- "[SD_CMD]", /* GPIO_86, BLSP12_SPI_MISO, P HSEC pin 11 */
- "[SD_DAT3]", /* GPIO_87, BLSP12_SPI_CS_N, P HSEC pin 7 */
- "[SD_SCLK]", /* GPIO_88, BLSP12_SPI_CLK, P HSEC pin 9 */
- "TSIF1_CLK", /* GPIO_89, S HSEC pin 42 */
- "TSIF1_EN", /* GPIO_90, S HSEC pin 46 */
- "TSIF1_DATA", /* GPIO_91, S HSEC pin 44 */
- "NC", /* GPIO_92 */
- "TSIF2_CLK", /* GPIO_93, S HSEC pin 52 */
- "TSIF2_EN", /* GPIO_94, S HSEC pin 56 */
- "TSIF2_DATA", /* GPIO_95, S HSEC pin 54 */
- "TSIF2_SYNC", /* GPIO_96, S HSEC pin 58 */
- "NC", /* GPIO_97 */
- "CAM1_STANDBY_N", /* GPIO_98 */
- "NC", /* GPIO_99 */
- "NC", /* GPIO_100 */
- "[LCD1_RESET_N]", /* GPIO_101, S HSEC pin 51 */
- "BOOT_CONFIG1", /* GPIO_102 */
- "USB_HUB_RESET", /* GPIO_103 */
- "CAM1_RST_N", /* GPIO_104 */
- "NC", /* GPIO_105 */
- "NC", /* GPIO_106 */
- "NC", /* GPIO_107 */
- "NC", /* GPIO_108 */
- "NC", /* GPIO_109 */
- "NC", /* GPIO_110 */
- "NC", /* GPIO_111 */
- "NC", /* GPIO_112 */
- "PMI8994_BUA", /* GPIO_113 */
- "PCIE2_RST_N", /* GPIO_114 */
- "PCIE2_CLKREQ_N", /* GPIO_115 */
- "PCIE2_WAKE", /* GPIO_116 */
- "SSC_IRQ_0", /* GPIO_117 */
- "SSC_IRQ_1", /* GPIO_118 */
- "SSC_IRQ_2", /* GPIO_119 */
- "NC", /* GPIO_120 */
- "GPIO121", /* GPIO_121, S HSEC pin 2 */
- "NC", /* GPIO_122 */
- "SSC_IRQ_6", /* GPIO_123 */
- "SSC_IRQ_7", /* GPIO_124 */
- "GPIO-C", /* GPIO_125, TS_INT0, LSEC pin 25 */
- "BOOT_CONFIG5", /* GPIO_126 */
- "NC", /* GPIO_127 */
- "NC", /* GPIO_128 */
- "BOOT_CONFIG7", /* GPIO_129 */
- "PCIE1_RST_N", /* GPIO_130 */
- "PCIE1_CLKREQ_N", /* GPIO_131 */
- "PCIE1_WAKE", /* GPIO_132 */
- "GPIO-L", /* GPIO_133, CAM2_STANDBY_N, LSEC pin 34 */
- "NC", /* GPIO_134 */
- "NC", /* GPIO_135 */
- "BOOT_CONFIG8", /* GPIO_136 */
- "NC", /* GPIO_137 */
- "NC", /* GPIO_138 */
- "GPS_SSBI2", /* GPIO_139 */
- "GPS_SSBI1", /* GPIO_140 */
- "NC", /* GPIO_141 */
- "NC", /* GPIO_142 */
- "NC", /* GPIO_143 */
- "BOOT_CONFIG6", /* GPIO_144 */
- "NC", /* GPIO_145 */
- "NC", /* GPIO_146 */
- "NC", /* GPIO_147 */
- "NC", /* GPIO_148 */
- "NC"; /* GPIO_149 */
- };
+&msmgpio {
+ gpio-line-names =
+ "[SPI0_DOUT]", /* GPIO_0, BLSP1_SPI_MOSI, LSEC pin 14 */
+ "[SPI0_DIN]", /* GPIO_1, BLSP1_SPI_MISO, LSEC pin 10 */
+ "[SPI0_CS]", /* GPIO_2, BLSP1_SPI_CS_N, LSEC pin 12 */
+ "[SPI0_SCLK]", /* GPIO_3, BLSP1_SPI_CLK, LSEC pin 8 */
+ "[UART1_TxD]", /* GPIO_4, BLSP8_UART_TX, LSEC pin 11 */
+ "[UART1_RxD]", /* GPIO_5, BLSP8_UART_RX, LSEC pin 13 */
+ "[I2C1_SDA]", /* GPIO_6, BLSP8_I2C_SDA, LSEC pin 21 */
+ "[I2C1_SCL]", /* GPIO_7, BLSP8_I2C_SCL, LSEC pin 19 */
+ "GPIO-H", /* GPIO_8, LCD0_RESET_N, LSEC pin 30 */
+ "TP93", /* GPIO_9 */
+ "GPIO-G", /* GPIO_10, MDP_VSYNC_P, LSEC pin 29 */
+ "[MDP_VSYNC_S]", /* GPIO_11, S HSEC pin 55 */
+ "NC", /* GPIO_12 */
+ "[CSI0_MCLK]", /* GPIO_13, CAM_MCLK0, P HSEC pin 15 */
+ "[CAM_MCLK1]", /* GPIO_14, J14 pin 11 */
+ "[CSI1_MCLK]", /* GPIO_15, CAM_MCLK2, P HSEC pin 17 */
+ "TP99", /* GPIO_16 */
+ "[I2C2_SDA]", /* GPIO_17, CCI_I2C_SDA0, P HSEC pin 34 */
+ "[I2C2_SCL]", /* GPIO_18, CCI_I2C_SCL0, P HSEC pin 32 */
+ "[CCI_I2C_SDA1]", /* GPIO_19, S HSEC pin 38 */
+ "[CCI_I2C_SCL1]", /* GPIO_20, S HSEC pin 36 */
+ "FLASH_STROBE_EN", /* GPIO_21, S HSEC pin 5 */
+ "FLASH_STROBE_TRIG", /* GPIO_22, S HSEC pin 1 */
+ "GPIO-K", /* GPIO_23, CAM2_RST_N, LSEC pin 33 */
+ "GPIO-D", /* GPIO_24, LSEC pin 26 */
+ "GPIO-I", /* GPIO_25, CAM0_RST_N, LSEC pin 31 */
+ "GPIO-J", /* GPIO_26, CAM0_STANDBY_N, LSEC pin 32 */
+ "BLSP6_I2C_SDA", /* GPIO_27 */
+ "BLSP6_I2C_SCL", /* GPIO_28 */
+ "GPIO-B", /* GPIO_29, TS0_RESET_N, LSEC pin 24 */
+ "GPIO30", /* GPIO_30, S HSEC pin 4 */
+ "HDMI_CEC", /* GPIO_31 */
+ "HDMI_DDC_CLOCK", /* GPIO_32 */
+ "HDMI_DDC_DATA", /* GPIO_33 */
+ "HDMI_HOT_PLUG_DETECT", /* GPIO_34 */
+ "PCIE0_RST_N", /* GPIO_35 */
+ "PCIE0_CLKREQ_N", /* GPIO_36 */
+ "PCIE0_WAKE", /* GPIO_37 */
+ "SD_CARD_DET_N", /* GPIO_38 */
+ "TSIF1_SYNC", /* GPIO_39, S HSEC pin 48 */
+ "W_DISABLE_N", /* GPIO_40 */
+ "[BLSP9_UART_TX]", /* GPIO_41 */
+ "[BLSP9_UART_RX]", /* GPIO_42 */
+ "[BLSP2_UART_CTS_N]", /* GPIO_43 */
+ "[BLSP2_UART_RFR_N]", /* GPIO_44 */
+ "[BLSP3_UART_TX]", /* GPIO_45 */
+ "[BLSP3_UART_RX]", /* GPIO_46 */
+ "[I2C0_SDA]", /* GPIO_47, LS_I2C0_SDA, LSEC pin 17 */
+ "[I2C0_SCL]", /* GPIO_48, LS_I2C0_SCL, LSEC pin 15 */
+ "[UART0_TxD]", /* GPIO_49, BLSP9_UART_TX, LSEC pin 5 */
+ "[UART0_RxD]", /* GPIO_50, BLSP9_UART_RX, LSEC pin 7 */
+ "[UART0_CTS]", /* GPIO_51, BLSP9_UART_CTS_N, LSEC pin 3 */
+ "[UART0_RTS]", /* GPIO_52, BLSP9_UART_RFR_N, LSEC pin 9 */
+ "[CODEC_INT1_N]", /* GPIO_53 */
+ "[CODEC_INT2_N]", /* GPIO_54 */
+ "[BLSP7_I2C_SDA]", /* GPIO_55 */
+ "[BLSP7_I2C_SCL]", /* GPIO_56 */
+ "MI2S_MCLK", /* GPIO_57, S HSEC pin 3 */
+ "[PCM_CLK]", /* GPIO_58, QUA_MI2S_SCK, LSEC pin 18 */
+ "[PCM_FS]", /* GPIO_59, QUA_MI2S_WS, LSEC pin 16 */
+ "[PCM_DO]", /* GPIO_60, QUA_MI2S_DATA0, LSEC pin 20 */
+ "[PCM_DI]", /* GPIO_61, QUA_MI2S_DATA1, LSEC pin 22 */
+ "GPIO-E", /* GPIO_62, LSEC pin 27 */
+ "TP87", /* GPIO_63 */
+ "[CODEC_RST_N]", /* GPIO_64 */
+ "[PCM1_CLK]", /* GPIO_65 */
+ "[PCM1_SYNC]", /* GPIO_66 */
+ "[PCM1_DIN]", /* GPIO_67 */
+ "[PCM1_DOUT]", /* GPIO_68 */
+ "AUDIO_REF_CLK", /* GPIO_69 */
+ "SLIMBUS_CLK", /* GPIO_70 */
+ "SLIMBUS_DATA0", /* GPIO_71 */
+ "SLIMBUS_DATA1", /* GPIO_72 */
+ "NC", /* GPIO_73 */
+ "NC", /* GPIO_74 */
+ "NC", /* GPIO_75 */
+ "NC", /* GPIO_76 */
+ "TP94", /* GPIO_77 */
+ "NC", /* GPIO_78 */
+ "TP95", /* GPIO_79 */
+ "GPIO-A", /* GPIO_80, MEMS_RESET_N, LSEC pin 23 */
+ "TP88", /* GPIO_81 */
+ "TP89", /* GPIO_82 */
+ "TP90", /* GPIO_83 */
+ "TP91", /* GPIO_84 */
+ "[SD_DAT0]", /* GPIO_85, BLSP12_SPI_MOSI, P HSEC pin 1 */
+ "[SD_CMD]", /* GPIO_86, BLSP12_SPI_MISO, P HSEC pin 11 */
+ "[SD_DAT3]", /* GPIO_87, BLSP12_SPI_CS_N, P HSEC pin 7 */
+ "[SD_SCLK]", /* GPIO_88, BLSP12_SPI_CLK, P HSEC pin 9 */
+ "TSIF1_CLK", /* GPIO_89, S HSEC pin 42 */
+ "TSIF1_EN", /* GPIO_90, S HSEC pin 46 */
+ "TSIF1_DATA", /* GPIO_91, S HSEC pin 44 */
+ "NC", /* GPIO_92 */
+ "TSIF2_CLK", /* GPIO_93, S HSEC pin 52 */
+ "TSIF2_EN", /* GPIO_94, S HSEC pin 56 */
+ "TSIF2_DATA", /* GPIO_95, S HSEC pin 54 */
+ "TSIF2_SYNC", /* GPIO_96, S HSEC pin 58 */
+ "NC", /* GPIO_97 */
+ "CAM1_STANDBY_N", /* GPIO_98 */
+ "NC", /* GPIO_99 */
+ "NC", /* GPIO_100 */
+ "[LCD1_RESET_N]", /* GPIO_101, S HSEC pin 51 */
+ "BOOT_CONFIG1", /* GPIO_102 */
+ "USB_HUB_RESET", /* GPIO_103 */
+ "CAM1_RST_N", /* GPIO_104 */
+ "NC", /* GPIO_105 */
+ "NC", /* GPIO_106 */
+ "NC", /* GPIO_107 */
+ "NC", /* GPIO_108 */
+ "NC", /* GPIO_109 */
+ "NC", /* GPIO_110 */
+ "NC", /* GPIO_111 */
+ "NC", /* GPIO_112 */
+ "PMI8994_BUA", /* GPIO_113 */
+ "PCIE2_RST_N", /* GPIO_114 */
+ "PCIE2_CLKREQ_N", /* GPIO_115 */
+ "PCIE2_WAKE", /* GPIO_116 */
+ "SSC_IRQ_0", /* GPIO_117 */
+ "SSC_IRQ_1", /* GPIO_118 */
+ "SSC_IRQ_2", /* GPIO_119 */
+ "NC", /* GPIO_120 */
+ "GPIO121", /* GPIO_121, S HSEC pin 2 */
+ "NC", /* GPIO_122 */
+ "SSC_IRQ_6", /* GPIO_123 */
+ "SSC_IRQ_7", /* GPIO_124 */
+ "GPIO-C", /* GPIO_125, TS_INT0, LSEC pin 25 */
+ "BOOT_CONFIG5", /* GPIO_126 */
+ "NC", /* GPIO_127 */
+ "NC", /* GPIO_128 */
+ "BOOT_CONFIG7", /* GPIO_129 */
+ "PCIE1_RST_N", /* GPIO_130 */
+ "PCIE1_CLKREQ_N", /* GPIO_131 */
+ "PCIE1_WAKE", /* GPIO_132 */
+ "GPIO-L", /* GPIO_133, CAM2_STANDBY_N, LSEC pin 34 */
+ "NC", /* GPIO_134 */
+ "NC", /* GPIO_135 */
+ "BOOT_CONFIG8", /* GPIO_136 */
+ "NC", /* GPIO_137 */
+ "NC", /* GPIO_138 */
+ "GPS_SSBI2", /* GPIO_139 */
+ "GPS_SSBI1", /* GPIO_140 */
+ "NC", /* GPIO_141 */
+ "NC", /* GPIO_142 */
+ "NC", /* GPIO_143 */
+ "BOOT_CONFIG6", /* GPIO_144 */
+ "NC", /* GPIO_145 */
+ "NC", /* GPIO_146 */
+ "NC", /* GPIO_147 */
+ "NC", /* GPIO_148 */
+ "NC"; /* GPIO_149 */
+};
- qcom,spmi@...f000 {
- pmic@0 {
- gpios@...0 {
- gpio-line-names =
- "NC",
- "KEY_VOLP_N",
- "NC",
- "BL1_PWM",
- "GPIO-F", /* BL0_PWM, LSEC pin 28 */
- "BL1_EN",
- "NC",
- "WLAN_EN",
- "NC",
- "NC",
- "NC",
- "NC",
- "NC",
- "NC",
- "DIVCLK1",
- "DIVCLK2",
- "DIVCLK3",
- "DIVCLK4",
- "BT_EN",
- "PMIC_SLB",
- "PMIC_BUA",
- "USB_VBUS_DET";
- };
-
- mpps@...0 {
- gpio-line-names =
- "VDDPX_BIAS",
- "WIFI_LED",
- "NC",
- "BT_LED",
- "PM_MPP05",
- "PM_MPP06",
- "PM_MPP07",
- "NC";
- };
- };
+&pm8994_gpios {
+ gpio-line-names =
+ "NC",
+ "KEY_VOLP_N",
+ "NC",
+ "BL1_PWM",
+ "GPIO-F", /* BL0_PWM, LSEC pin 28 */
+ "BL1_EN",
+ "NC",
+ "WLAN_EN",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "DIVCLK1",
+ "DIVCLK2",
+ "DIVCLK3",
+ "DIVCLK4",
+ "BT_EN",
+ "PMIC_SLB",
+ "PMIC_BUA",
+ "USB_VBUS_DET";
+};
- pmic@2 {
- gpios@...0 {
- gpio-line-names =
- "NC",
- "SPKR_AMP_EN1",
- "SPKR_AMP_EN2",
- "TP61",
- "NC",
- "USB2_VBUS_DET",
- "NC",
- "NC",
- "NC",
- "NC";
- };
- };
- };
+&pm8994_mpps {
+ gpio-line-names =
+ "VDDPX_BIAS",
+ "WIFI_LED",
+ "NC",
+ "BT_LED",
+ "PM_MPP05",
+ "PM_MPP06",
+ "PM_MPP07",
+ "NC";
+};
- phy@...00 {
- status = "okay";
- };
+&pmi8994_gpios {
+ gpio-line-names =
+ "NC",
+ "SPKR_AMP_EN1",
+ "SPKR_AMP_EN2",
+ "TP61",
+ "NC",
+ "USB2_VBUS_DET",
+ "NC",
+ "NC",
+ "NC",
+ "NC";
+};
- phy@...0000 {
- status = "okay";
- };
+&pcie_phy {
+ status = "okay";
+};
- phy@...1000 {
- status = "okay";
- };
+&usb3phy {
+ status = "okay";
+};
- phy@...2000 {
- status = "okay";
- };
+&hsusb_phy1 {
+ status = "okay";
+};
- usb@...8800 {
- status = "okay";
- extcon = <&usb3_id>;
+&hsusb_phy2 {
+ status = "okay";
+};
- dwc3@...0000 {
- extcon = <&usb3_id>;
- dr_mode = "otg";
- };
- };
+&usb3 {
+ status = "okay";
+ extcon = <&usb3_id>;
- usb@...8800 {
- status = "okay";
- extcon = <&usb2_id>;
+ dwc3@...0000 {
+ extcon = <&usb3_id>;
+ dr_mode = "otg";
+ };
+};
- dwc3@...0000 {
- extcon = <&usb2_id>;
- dr_mode = "otg";
- maximum-speed = "high-speed";
- };
- };
+&usb2 {
+ status = "okay";
+ extcon = <&usb2_id>;
- agnoc@0 {
- pcie@...000 {
- status = "okay";
- perst-gpio = <&msmgpio 35 GPIO_ACTIVE_LOW>;
- vddpe-3v3-supply = <&wlan_en>;
- };
+ dwc3@...0000 {
+ extcon = <&usb2_id>;
+ dr_mode = "otg";
+ maximum-speed = "high-speed";
+ };
+};
- pcie@...000 {
- status = "okay";
- perst-gpio = <&msmgpio 130 GPIO_ACTIVE_LOW>;
- };
+&pcie0 {
+ status = "okay";
+ perst-gpio = <&msmgpio 35 GPIO_ACTIVE_LOW>;
+ vddpe-3v3-supply = <&wlan_en>;
+};
- pcie@...000 {
- status = "okay";
- perst-gpio = <&msmgpio 114 GPIO_ACTIVE_LOW>;
- };
- };
+&pcie1 {
+ status = "okay";
+ perst-gpio = <&msmgpio 130 GPIO_ACTIVE_LOW>;
+};
- slim_msm: slim@...0000 {
- ngd@1 {
- wcd9335: codec@1{
- clock-names = "mclk", "slimbus";
- clocks = <&div1_mclk>,
- <&rpmcc RPM_SMD_BB_CLK1>;
- };
- };
- };
+&pcie2 {
+ status = "okay";
+ perst-gpio = <&msmgpio 114 GPIO_ACTIVE_LOW>;
+};
- mdss@...000 {
- status = "okay";
+&wcd9335 {
+ clock-names = "mclk", "slimbus";
+ clocks = <&div1_mclk>,
+ <&rpmcc RPM_SMD_BB_CLK1>;
+};
- mdp@...000 {
- status = "okay";
- };
+&mdss {
+ status = "okay";
+};
- hdmi-phy@...600 {
- status = "okay";
+&mdp {
+ status = "okay";
+};
- vddio-supply = <&pm8994_l12>;
- vcca-supply = <&pm8994_l28>;
- #phy-cells = <0>;
- };
+&hdmi_phy {
+ status = "okay";
- hdmi-tx@...000 {
- status = "okay";
+ vddio-supply = <&pm8994_l12>;
+ vcca-supply = <&pm8994_l28>;
+ #phy-cells = <0>;
+};
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&hdmi_hpd_active &hdmi_ddc_active>;
- pinctrl-1 = <&hdmi_hpd_suspend &hdmi_ddc_suspend>;
+&hdmi {
+ status = "okay";
- core-vdda-supply = <&pm8994_l12>;
- core-vcc-supply = <&pm8994_s4>;
- };
- };
- };
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&hdmi_hpd_active &hdmi_ddc_active>;
+ pinctrl-1 = <&hdmi_hpd_suspend &hdmi_ddc_suspend>;
+ core-vdda-supply = <&pm8994_l12>;
+ core-vcc-supply = <&pm8994_s4>;
+};
+/ {
gpio_keys {
compatible = "gpio-keys";
#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 87f4d9c1b0d4..36f161547aa6 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -1443,7 +1443,7 @@
};
};
- phy@...00 {
+ pcie_phy: phy@...00 {
compatible = "qcom,msm8996-qmp-pcie-phy";
reg = <0x34000 0x488>;
#clock-cells = <1>;
@@ -1505,7 +1505,7 @@
};
};
- phy@...0000 {
+ usb3phy: phy@...0000 {
compatible = "qcom,msm8996-qmp-usb3-phy";
reg = <0x7410000 0x1c4>;
#clock-cells = <1>;
--
2.23.0
Powered by blists - more mailing lists