| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20191022125601.24653506@archlinux>
Date: Tue, 22 Oct 2019 12:56:01 +0100
From: Jonathan Cameron <jic23@...nel.org>
To: Fabrice Gasnier <fabrice.gasnier@...com>
Cc: <linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>, <mcoquelin.stm32@...il.com>,
<alexandre.torgue@...com>, <linux-iio@...r.kernel.org>,
<lars@...afoo.de>, <knaack.h@....de>, <pmeerw@...erw.net>,
<linux-stm32@...md-mailman.stormreply.com>
Subject: Re: [PATCH] iio: adc: stm32-adc: fix kernel-doc warnings
On Sat, 21 Sep 2019 19:03:57 +0100
Jonathan Cameron <jic23@...nel.org> wrote:
> On Fri, 20 Sep 2019 13:50:06 +0200
> Fabrice Gasnier <fabrice.gasnier@...com> wrote:
>
> > Fix the following warnings when documentation is built:
> > drivers/iio/adc/stm32-adc-core.c:62: warning: cannot understand function
> > prototype: 'struct stm32_adc_common_regs '
> > drivers/iio/adc/stm32-adc-core.c:78: warning: cannot understand function
> > prototype: 'struct stm32_adc_priv_cfg '
> > drivers/iio/adc/stm32-adc-core.c:123: warning: Function parameter or
> > member 'pdev' not described in 'stm32f4_adc_clk_sel'
> > drivers/iio/adc/stm32-adc.c:219: warning: cannot understand function
> > prototype: 'struct stm32_adc_regs '
> > drivers/iio/adc/stm32-adc.c:237: warning: cannot understand function
> > prototype: 'struct stm32_adc_regspec '
> > drivers/iio/adc/stm32-adc.c:264: warning: cannot understand function
> > prototype: 'struct stm32_adc_cfg '
> > drivers/iio/adc/stm32-adc.c:323: warning: Function parameter or member
> > 'difsel' not described in 'N'
> > drivers/iio/adc/stm32-adc.c:323: warning: Function parameter or member
> > 'pcsel' not described in 'stm32_adc'
> > drivers/iio/adc/stm32-adc.c:371: warning: cannot understand function
> > prototype: 'const struct stm32_adc_regs stm32f4_sq[STM32_ADC_MAX_SQ + 1]
> > drivers/iio/adc/stm32-adc.c:417: warning: cannot understand function
> > prototype: 'const struct stm32_adc_regs stm32f4_smp_bits[] = '
> > drivers/iio/adc/stm32-adc.c:508: warning: cannot understand function
> > prototype: 'const struct stm32_adc_regs stm32h7_smp_bits[] = '
> > drivers/iio/adc/stm32-adc.c:1112: warning: Function parameter or member
> > 'indio_dev' not described in 'stm32_adc_get_trig_extsel'
> > drivers/iio/adc/stm32-adc.c:1420: warning: Function parameter or member
> > 'indio_dev' not described in 'stm32_adc_debugfs_reg_access'
> > drivers/iio/adc/stm32-adc.c:1420: warning: Function parameter or member
> > 'reg' not described in 'stm32_adc_debugfs_reg_access'
> > drivers/iio/adc/stm32-adc.c:1420: warning: Function parameter or member
> > 'writeval' not described in 'stm32_adc_debugfs_reg_access'
> > drivers/iio/adc/stm32-adc.c:1420: warning: Function parameter or member
> > 'readval' not described in 'stm32_adc_debugfs_reg_access'
> >
> > Signed-off-by: Fabrice Gasnier <fabrice.gasnier@...com>
>
> As I don't think we build these particular docs by default, I'm not going
> to take this as a fix. Hence it'll have to wait for the below to be
> upstream of my togreg branch.
>
> Give me a poke if that's true and I seem to have missed it.
Applied to the togreg branch of iio.git and pushed out as testing
for the autobuilders to play with it.
Thanks,
Jonathan
>
> Thanks,
>
> Jonathan
>
> > ---
> > Note: this applies on top of "iio: adc: stm32-adc: fix a race when using
> > several adcs with dma and irq"
> > ---
> > drivers/iio/adc/stm32-adc-core.c | 11 ++++++-----
> > drivers/iio/adc/stm32-adc.c | 21 +++++++++++++--------
> > 2 files changed, 19 insertions(+), 13 deletions(-)
> >
> > diff --git a/drivers/iio/adc/stm32-adc-core.c b/drivers/iio/adc/stm32-adc-core.c
> > index 93a096a..20c626c 100644
> > --- a/drivers/iio/adc/stm32-adc-core.c
> > +++ b/drivers/iio/adc/stm32-adc-core.c
> > @@ -38,12 +38,12 @@
> > #define HAS_ANASWVDD BIT(1)
> >
> > /**
> > - * stm32_adc_common_regs - stm32 common registers, compatible dependent data
> > + * struct stm32_adc_common_regs - stm32 common registers
> > * @csr: common status register offset
> > * @ccr: common control register offset
> > - * @eoc1: adc1 end of conversion flag in @csr
> > - * @eoc2: adc2 end of conversion flag in @csr
> > - * @eoc3: adc3 end of conversion flag in @csr
> > + * @eoc1_msk: adc1 end of conversion flag in @csr
> > + * @eoc2_msk: adc2 end of conversion flag in @csr
> > + * @eoc3_msk: adc3 end of conversion flag in @csr
> > * @ier: interrupt enable register offset for each adc
> > * @eocie_msk: end of conversion interrupt enable mask in @ier
> > */
> > @@ -60,7 +60,7 @@ struct stm32_adc_common_regs {
> > struct stm32_adc_priv;
> >
> > /**
> > - * stm32_adc_priv_cfg - stm32 core compatible configuration data
> > + * struct stm32_adc_priv_cfg - stm32 core compatible configuration data
> > * @regs: common registers for all instances
> > * @clk_sel: clock selection routine
> > * @max_clk_rate_hz: maximum analog clock rate (Hz, from datasheet)
> > @@ -117,6 +117,7 @@ static int stm32f4_pclk_div[] = {2, 4, 6, 8};
> >
> > /**
> > * stm32f4_adc_clk_sel() - Select stm32f4 ADC common clock prescaler
> > + * @pdev: platform device
> > * @priv: stm32 ADC core private data
> > * Select clock prescaler used for analog conversions, before using ADC.
> > */
> > diff --git a/drivers/iio/adc/stm32-adc.c b/drivers/iio/adc/stm32-adc.c
> > index 663f8a5..76a247b 100644
> > --- a/drivers/iio/adc/stm32-adc.c
> > +++ b/drivers/iio/adc/stm32-adc.c
> > @@ -102,7 +102,7 @@ struct stm32_adc_calib {
> > };
> >
> > /**
> > - * stm32_adc_regs - stm32 ADC misc registers & bitfield desc
> > + * struct stm32_adc_regs - stm32 ADC misc registers & bitfield desc
> > * @reg: register offset
> > * @mask: bitfield mask
> > * @shift: left shift
> > @@ -114,7 +114,7 @@ struct stm32_adc_regs {
> > };
> >
> > /**
> > - * stm32_adc_regspec - stm32 registers definition, compatible dependent data
> > + * struct stm32_adc_regspec - stm32 registers definition
> > * @dr: data register offset
> > * @ier_eoc: interrupt enable register & eocie bitfield
> > * @isr_eoc: interrupt status register & eoc bitfield
> > @@ -140,7 +140,7 @@ struct stm32_adc_regspec {
> > struct stm32_adc;
> >
> > /**
> > - * stm32_adc_cfg - stm32 compatible configuration data
> > + * struct stm32_adc_cfg - stm32 compatible configuration data
> > * @regs: registers descriptions
> > * @adc_info: per instance input channels definitions
> > * @trigs: external trigger sources
> > @@ -183,8 +183,8 @@ struct stm32_adc_cfg {
> > * @rx_buf: dma rx buffer cpu address
> > * @rx_dma_buf: dma rx buffer bus address
> > * @rx_buf_sz: dma rx buffer size
> > - * @difsel bitmask to set single-ended/differential channel
> > - * @pcsel bitmask to preselect channels on some devices
> > + * @difsel: bitmask to set single-ended/differential channel
> > + * @pcsel: bitmask to preselect channels on some devices
> > * @smpr_val: sampling time settings (e.g. smpr1 / smpr2)
> > * @cal: optional calibration data on some devices
> > * @chan_name: channel name array
> > @@ -254,7 +254,7 @@ static const struct stm32_adc_info stm32h7_adc_info = {
> > .num_res = ARRAY_SIZE(stm32h7_adc_resolutions),
> > };
> >
> > -/**
> > +/*
> > * stm32f4_sq - describe regular sequence registers
> > * - L: sequence len (register & bit field)
> > * - SQ1..SQ16: sequence entries (register & bit field)
> > @@ -301,7 +301,7 @@ static struct stm32_adc_trig_info stm32f4_adc_trigs[] = {
> > {}, /* sentinel */
> > };
> >
> > -/**
> > +/*
> > * stm32f4_smp_bits[] - describe sampling time register index & bit fields
> > * Sorted so it can be indexed by channel number.
> > */
> > @@ -392,7 +392,7 @@ static struct stm32_adc_trig_info stm32h7_adc_trigs[] = {
> > {},
> > };
> >
> > -/**
> > +/*
> > * stm32h7_smp_bits - describe sampling time register index & bit fields
> > * Sorted so it can be indexed by channel number.
> > */
> > @@ -994,6 +994,7 @@ static int stm32_adc_conf_scan_seq(struct iio_dev *indio_dev,
> >
> > /**
> > * stm32_adc_get_trig_extsel() - Get external trigger selection
> > + * @indio_dev: IIO device structure
> > * @trig: trigger
> > *
> > * Returns trigger extsel value, if trig matches, -EINVAL otherwise.
> > @@ -1297,6 +1298,10 @@ static int stm32_adc_of_xlate(struct iio_dev *indio_dev,
> >
> > /**
> > * stm32_adc_debugfs_reg_access - read or write register value
> > + * @indio_dev: IIO device structure
> > + * @reg: register offset
> > + * @writeval: value to write
> > + * @readval: value to read
> > *
> > * To read a value from an ADC register:
> > * echo [ADC reg offset] > direct_reg_access
>
Powered by blists - more mailing lists