linux-kernel - [PATCH v3 1/3] dt-bindings: sdhci-of-at91: new compatible string and update properties

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <20191025080344.15492-1-ludovic.desroches@microchip.com>
Date:   Fri, 25 Oct 2019 10:03:42 +0200
From:   Ludovic Desroches <ludovic.desroches@...rochip.com>
To:     <linux-arm-kernel@...ts.infradead.org>,
        <linux-mmc@...r.kernel.org>, <devicetree@...r.kernel.org>
CC:     <ulf.hansson@...aro.org>, <nicolas.ferre@...rochip.com>,
        <adrian.hunter@...el.com>, <linux-kernel@...r.kernel.org>,
        <robh+dt@...nel.org>, <mark.rutland@....com>,
        <claudiu.beznea@...rochip.com>, <Eugen.Hristev@...rochip.com>,
        <alexandre.belloni@...tlin.com>,
        "Ludovic Desroches" <ludovic.desroches@...rochip.com>,
        Rob Herring <robh@...nel.org>
Subject: [PATCH v3 1/3] dt-bindings: sdhci-of-at91: new compatible string and update properties

There is a new compatible string for the SAM9X60 sdhci device. It involves
an update of the properties about the clocks stuff.

Signed-off-by: Ludovic Desroches <ludovic.desroches@...rochip.com>
Reviewed-by: Rob Herring <robh@...nel.org>
---

Changes:
- v3: rebase due to conflict with Nicolas' patch
- v2: remove the extra example and fix node label

 .../devicetree/bindings/mmc/sdhci-atmel.txt         | 13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/mmc/sdhci-atmel.txt b/Documentation/devicetree/bindings/mmc/sdhci-atmel.txt
index 503c6dbac1b2..69edfd4d3922 100644
--- a/Documentation/devicetree/bindings/mmc/sdhci-atmel.txt
+++ b/Documentation/devicetree/bindings/mmc/sdhci-atmel.txt
@@ -5,11 +5,16 @@ Documentation/devicetree/bindings/mmc/mmc.txt and the properties used by the
 sdhci-of-at91 driver.
 
 Required properties:
-- compatible:		Must be "atmel,sama5d2-sdhci".
+- compatible:		Must be "atmel,sama5d2-sdhci" or "microchip,sam9x60-sdhci".
 - clocks:		Phandlers to the clocks.
-- clock-names:		Must be "hclock", "multclk", "baseclk";
+- clock-names:		Must be "hclock", "multclk", "baseclk" for
+			"atmel,sama5d2-sdhci".
+			Must be "hclock", "multclk" for "microchip,sam9x60-sdhci".
 
 Optional properties:
+- assigned-clocks:	The same with "multclk".
+- assigned-clock-rates	The rate of "multclk" in order to not rely on the
+			gck configuration set by previous components.
 - microchip,sdcal-inverted: when present, polarity on the SDCAL SoC pin is
   inverted. The default polarity for this signal is described in the datasheet.
   For instance on SAMA5D2, the pin is usually tied to the GND with a resistor
@@ -17,10 +22,12 @@ Optional properties:
 
 Example:
 
-sdmmc0: sdio-host@...00000 {
+mmc0: sdio-host@...00000 {
 	compatible = "atmel,sama5d2-sdhci";
 	reg = <0xa0000000 0x300>;
 	interrupts = <31 IRQ_TYPE_LEVEL_HIGH 0>;
 	clocks = <&sdmmc0_hclk>, <&sdmmc0_gclk>, <&main>;
 	clock-names = "hclock", "multclk", "baseclk";
+	assigned-clocks = <&sdmmc0_gclk>;
+	assigned-clock-rates = <480000000>;
 };
-- 
2.24.0.rc0