| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Sat, 26 Oct 2019 21:57:48 +0200
From: Andreas Kemnade <andreas@...nade.info>
To: robh+dt@...nel.org, mark.rutland@....com, shawnguo@...nel.org,
s.hauer@...gutronix.de, kernel@...gutronix.de, festevam@...il.com,
linux-imx@....com, manivannan.sadhasivam@...aro.org,
andrew.smirnov@...il.com, marex@...x.de, angus@...ea.ca,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, j.neuschaefer@....net,
Discussions about the Letux Kernel
<letux-kernel@...nphoenux.org>,
Marco Felsch <m.felsch@...gutronix.de>
Cc: Andreas Kemnade <andreas@...nade.info>
Subject: [PATCH v4 3/3] ARM: dts: imx: add devicetree for Kobo Clara HD
This adds a devicetree for the Kobo Clara HD Ebook reader. It
is on based on boards called "e60k02". It is equipped with an
imx6sll SoC.
Signed-off-by: Andreas Kemnade <andreas@...nade.info>
---
- remove mux container
- underscore -> hyphen in node names
- reorder nodes
- adding pinmux-* properties which are removed from the dtsi
arch/arm/boot/dts/Makefile | 3 +-
arch/arm/boot/dts/imx6sll-kobo-clarahd.dts | 324 +++++++++++++++++++++
2 files changed, 326 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/boot/dts/imx6sll-kobo-clarahd.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 9159fa2cea90..a8a235c74c37 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -551,7 +551,8 @@ dtb-$(CONFIG_SOC_IMX6SL) += \
imx6sl-evk.dtb \
imx6sl-warp.dtb
dtb-$(CONFIG_SOC_IMX6SLL) += \
- imx6sll-evk.dtb
+ imx6sll-evk.dtb \
+ imx6sll-kobo-clarahd.dtb
dtb-$(CONFIG_SOC_IMX6SX) += \
imx6sx-nitrogen6sx.dtb \
imx6sx-sabreauto.dtb \
diff --git a/arch/arm/boot/dts/imx6sll-kobo-clarahd.dts b/arch/arm/boot/dts/imx6sll-kobo-clarahd.dts
new file mode 100644
index 000000000000..7214d1c98249
--- /dev/null
+++ b/arch/arm/boot/dts/imx6sll-kobo-clarahd.dts
@@ -0,0 +1,324 @@
+// SPDX-License-Identifier: (GPL-2.0)
+/*
+ * Device tree for the Kobo Clara HD ebook reader
+ *
+ * Name on mainboard is: 37NB-E60K00+4A4
+ * Serials start with: E60K02 (a number also seen in
+ * vendor kernel sources)
+ *
+ * This mainboard seems to be equipped with different SoCs.
+ * In the Kobo Clara HD ebook reader it is an i.MX6SLL
+ *
+ * Copyright 2019 Andreas Kemnade
+ * based on works
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "imx6sll.dtsi"
+#include "e60k02.dtsi"
+
+/ {
+ model = "Kobo Clara HD";
+ compatible = "kobo,clarahd", "fsl,imx6sll";
+};
+
+&clks {
+ assigned-clocks = <&clks IMX6SLL_CLK_PLL4_AUDIO_DIV>;
+ assigned-clock-rates = <393216000>;
+};
+
+&cpu0 {
+ arm-supply = <&dcdc3_reg>;
+ soc-supply = <&dcdc1_reg>;
+};
+
+&gpio_keys {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_keys>;
+};
+
+&i2c1 {
+ pinctrl-names = "default","sleep";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ pinctrl-1 = <&pinctrl_i2c1_sleep>;
+};
+
+&i2c2 {
+ pinctrl-names = "default","sleep";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ pinctrl-1 = <&pinctrl_i2c2_sleep>;
+};
+
+&i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ pinctrl_gpio_keys: gpio-keysgrp {
+ fsl,pins = <
+ MX6SLL_PAD_SD1_DATA1__GPIO5_IO08 0x17059 /* PWR_SW */
+ MX6SLL_PAD_SD1_DATA4__GPIO5_IO12 0x17059 /* HALL_EN */
+ >;
+ };
+
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ MX6SLL_PAD_LCD_DATA00__GPIO2_IO20 0x79
+ MX6SLL_PAD_LCD_DATA01__GPIO2_IO21 0x79
+ MX6SLL_PAD_LCD_DATA02__GPIO2_IO22 0x79
+ MX6SLL_PAD_LCD_DATA03__GPIO2_IO23 0x79
+ MX6SLL_PAD_LCD_DATA04__GPIO2_IO24 0x79
+ MX6SLL_PAD_LCD_DATA05__GPIO2_IO25 0x79
+ MX6SLL_PAD_LCD_DATA06__GPIO2_IO26 0x79
+ MX6SLL_PAD_LCD_DATA07__GPIO2_IO27 0x79
+ MX6SLL_PAD_LCD_DATA08__GPIO2_IO28 0x79
+ MX6SLL_PAD_LCD_DATA09__GPIO2_IO29 0x79
+ MX6SLL_PAD_LCD_DATA10__GPIO2_IO30 0x79
+ MX6SLL_PAD_LCD_DATA11__GPIO2_IO31 0x79
+ MX6SLL_PAD_LCD_DATA12__GPIO3_IO00 0x79
+ MX6SLL_PAD_LCD_DATA13__GPIO3_IO01 0x79
+ MX6SLL_PAD_LCD_DATA14__GPIO3_IO02 0x79
+ MX6SLL_PAD_LCD_DATA15__GPIO3_IO03 0x79
+ MX6SLL_PAD_LCD_DATA16__GPIO3_IO04 0x79
+ MX6SLL_PAD_LCD_DATA17__GPIO3_IO05 0x79
+ MX6SLL_PAD_LCD_DATA18__GPIO3_IO06 0x79
+ MX6SLL_PAD_LCD_DATA19__GPIO3_IO07 0x79
+ MX6SLL_PAD_LCD_DATA20__GPIO3_IO08 0x79
+ MX6SLL_PAD_LCD_DATA21__GPIO3_IO09 0x79
+ MX6SLL_PAD_LCD_DATA22__GPIO3_IO10 0x79
+ MX6SLL_PAD_LCD_DATA23__GPIO3_IO11 0x79
+ MX6SLL_PAD_LCD_CLK__GPIO2_IO15 0x79
+ MX6SLL_PAD_LCD_ENABLE__GPIO2_IO16 0x79
+ MX6SLL_PAD_LCD_HSYNC__GPIO2_IO17 0x79
+ MX6SLL_PAD_LCD_VSYNC__GPIO2_IO18 0x79
+ MX6SLL_PAD_LCD_RESET__GPIO2_IO19 0x79
+ MX6SLL_PAD_KEY_COL3__GPIO3_IO30 0x79
+ MX6SLL_PAD_KEY_ROW7__GPIO4_IO07 0x79
+ MX6SLL_PAD_ECSPI2_MOSI__GPIO4_IO13 0x79
+ MX6SLL_PAD_KEY_COL5__GPIO4_IO02 0x79
+ MX6SLL_PAD_KEY_ROW6__GPIO4_IO05 0x79
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX6SLL_PAD_I2C1_SCL__I2C1_SCL 0x4001f8b1
+ MX6SLL_PAD_I2C1_SDA__I2C1_SDA 0x4001f8b1
+ >;
+ };
+
+ pinctrl_i2c1_sleep: i2c1grp-sleep {
+ fsl,pins = <
+ MX6SLL_PAD_I2C1_SCL__I2C1_SCL 0x400108b1
+ MX6SLL_PAD_I2C1_SDA__I2C1_SDA 0x400108b1
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX6SLL_PAD_I2C2_SCL__I2C2_SCL 0x4001f8b1
+ MX6SLL_PAD_I2C2_SDA__I2C2_SDA 0x4001f8b1
+ >;
+ };
+
+ pinctrl_i2c2_sleep: i2c2grp-sleep {
+ fsl,pins = <
+ MX6SLL_PAD_I2C2_SCL__I2C2_SCL 0x400108b1
+ MX6SLL_PAD_I2C2_SDA__I2C2_SDA 0x400108b1
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX6SLL_PAD_REF_CLK_24M__I2C3_SCL 0x4001f8b1
+ MX6SLL_PAD_REF_CLK_32K__I2C3_SDA 0x4001f8b1
+ >;
+ };
+
+ pinctrl_led: ledgrp {
+ fsl,pins = <
+ MX6SLL_PAD_SD1_DATA6__GPIO5_IO07 0x17059
+ >;
+ };
+
+ pinctrl_lm3630a_bl_gpio: lm3630a-bl-gpiogrp {
+ fsl,pins = <
+ MX6SLL_PAD_EPDC_PWR_CTRL3__GPIO2_IO10 0x10059 /* HWEN */
+ >;
+ };
+
+ pinctrl_ricoh_gpio: ricoh-gpiogrp {
+ fsl,pins = <
+ MX6SLL_PAD_SD1_CLK__GPIO5_IO15 0x1b8b1 /* ricoh619 chg */
+ MX6SLL_PAD_SD1_DATA0__GPIO5_IO11 0x1b8b1 /* ricoh619 irq */
+ MX6SLL_PAD_KEY_COL2__GPIO3_IO28 0x1b8b1 /* ricoh619 bat_low_int */
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX6SLL_PAD_UART1_TXD__UART1_DCE_TX 0x1b0b1
+ MX6SLL_PAD_UART1_RXD__UART1_DCE_RX 0x1b0b1
+ >;
+ };
+
+ pinctrl_usbotg1: usbotg1grp {
+ fsl,pins = <
+ MX6SLL_PAD_EPDC_PWR_COM__USB_OTG1_ID 0x17059
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX6SLL_PAD_SD2_CMD__SD2_CMD 0x17059
+ MX6SLL_PAD_SD2_CLK__SD2_CLK 0x13059
+ MX6SLL_PAD_SD2_DATA0__SD2_DATA0 0x17059
+ MX6SLL_PAD_SD2_DATA1__SD2_DATA1 0x17059
+ MX6SLL_PAD_SD2_DATA2__SD2_DATA2 0x17059
+ MX6SLL_PAD_SD2_DATA3__SD2_DATA3 0x17059
+ >;
+ };
+
+ pinctrl_usdhc2_100mhz: usdhc2grp-100mhz {
+ fsl,pins = <
+ MX6SLL_PAD_SD2_CMD__SD2_CMD 0x170b9
+ MX6SLL_PAD_SD2_CLK__SD2_CLK 0x130b9
+ MX6SLL_PAD_SD2_DATA0__SD2_DATA0 0x170b9
+ MX6SLL_PAD_SD2_DATA1__SD2_DATA1 0x170b9
+ MX6SLL_PAD_SD2_DATA2__SD2_DATA2 0x170b9
+ MX6SLL_PAD_SD2_DATA3__SD2_DATA3 0x170b9
+ >;
+ };
+
+ pinctrl_usdhc2_200mhz: usdhc2grp-200mhz {
+ fsl,pins = <
+ MX6SLL_PAD_SD2_CMD__SD2_CMD 0x170f9
+ MX6SLL_PAD_SD2_CLK__SD2_CLK 0x130f9
+ MX6SLL_PAD_SD2_DATA0__SD2_DATA0 0x170f9
+ MX6SLL_PAD_SD2_DATA1__SD2_DATA1 0x170f9
+ MX6SLL_PAD_SD2_DATA2__SD2_DATA2 0x170f9
+ MX6SLL_PAD_SD2_DATA3__SD2_DATA3 0x170f9
+ >;
+ };
+
+ pinctrl_usdhc2_sleep: usdhc2grp-sleep {
+ fsl,pins = <
+ MX6SLL_PAD_SD2_CMD__GPIO5_IO04 0x100f9
+ MX6SLL_PAD_SD2_CLK__GPIO5_IO05 0x100f9
+ MX6SLL_PAD_SD2_DATA0__GPIO5_IO01 0x100f9
+ MX6SLL_PAD_SD2_DATA1__GPIO4_IO30 0x100f9
+ MX6SLL_PAD_SD2_DATA2__GPIO5_IO03 0x100f9
+ MX6SLL_PAD_SD2_DATA3__GPIO4_IO28 0x100f9
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX6SLL_PAD_SD3_CMD__SD3_CMD 0x11059
+ MX6SLL_PAD_SD3_CLK__SD3_CLK 0x11059
+ MX6SLL_PAD_SD3_DATA0__SD3_DATA0 0x11059
+ MX6SLL_PAD_SD3_DATA1__SD3_DATA1 0x11059
+ MX6SLL_PAD_SD3_DATA2__SD3_DATA2 0x11059
+ MX6SLL_PAD_SD3_DATA3__SD3_DATA3 0x11059
+ >;
+ };
+
+ pinctrl_usdhc3_100mhz: usdhc3grp-100mhz {
+ fsl,pins = <
+ MX6SLL_PAD_SD3_CMD__SD3_CMD 0x170b9
+ MX6SLL_PAD_SD3_CLK__SD3_CLK 0x170b9
+ MX6SLL_PAD_SD3_DATA0__SD3_DATA0 0x170b9
+ MX6SLL_PAD_SD3_DATA1__SD3_DATA1 0x170b9
+ MX6SLL_PAD_SD3_DATA2__SD3_DATA2 0x170b9
+ MX6SLL_PAD_SD3_DATA3__SD3_DATA3 0x170b9
+ >;
+ };
+
+ pinctrl_usdhc3_200mhz: usdhc3grp-200mhz {
+ fsl,pins = <
+ MX6SLL_PAD_SD3_CMD__SD3_CMD 0x170f9
+ MX6SLL_PAD_SD3_CLK__SD3_CLK 0x170f9
+ MX6SLL_PAD_SD3_DATA0__SD3_DATA0 0x170f9
+ MX6SLL_PAD_SD3_DATA1__SD3_DATA1 0x170f9
+ MX6SLL_PAD_SD3_DATA2__SD3_DATA2 0x170f9
+ MX6SLL_PAD_SD3_DATA3__SD3_DATA3 0x170f9
+ >;
+ };
+
+ pinctrl_usdhc3_sleep: usdhc3grp-sleep {
+ fsl,pins = <
+ MX6SLL_PAD_SD3_CMD__GPIO5_IO21 0x100c1
+ MX6SLL_PAD_SD3_CLK__GPIO5_IO18 0x100c1
+ MX6SLL_PAD_SD3_DATA0__GPIO5_IO19 0x100c1
+ MX6SLL_PAD_SD3_DATA1__GPIO5_IO20 0x100c1
+ MX6SLL_PAD_SD3_DATA2__GPIO5_IO16 0x100c1
+ MX6SLL_PAD_SD3_DATA3__GPIO5_IO17 0x100c1
+ >;
+ };
+
+ pinctrl_wifi_power: wifi-powergrp {
+ fsl,pins = <
+ MX6SLL_PAD_SD2_DATA6__GPIO4_IO29 0x10059 /* WIFI_3V3_ON */
+ >;
+ };
+
+ pinctrl_wifi_reset: wifi-resetgrp {
+ fsl,pins = <
+ MX6SLL_PAD_SD2_DATA7__GPIO5_IO00 0x10059 /* WIFI_RST */
+ >;
+ };
+};
+
+&leds {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_led>;
+};
+
+&lm3630a {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lm3630a_bl_gpio>;
+};
+
+®_wifi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wifi_power>;
+};
+
+&ricoh619 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ricoh_gpio>;
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+};
+
+&usdhc2 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz","sleep";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+ pinctrl-3 = <&pinctrl_usdhc2_sleep>;
+};
+
+&usdhc3 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz","sleep";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+ pinctrl-3 = <&pinctrl_usdhc3_sleep>;
+};
+
+&wifi_pwrseq {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wifi_reset>;
+};
--
2.20.1
Powered by blists - more mailing lists