[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAFqH_53iQt0o9keRQLyqx-B=bni37bkTACF=wBKgSLOLz-hw4g@mail.gmail.com>
Date: Wed, 30 Oct 2019 17:59:16 +0100
From: Enric Balletbo Serra <eballetbo@...il.com>
To: Sean Paul <sean@...rly.run>
Cc: dri-devel <dri-devel@...ts.freedesktop.org>,
David Airlie <airlied@...ux.ie>,
Daniel Vetter <daniel.vetter@...ll.ch>,
linux-kernel <linux-kernel@...r.kernel.org>,
"open list:ARM/Rockchip SoC..." <linux-rockchip@...ts.infradead.org>,
Sean Paul <seanpaul@...omium.org>, jekarl@....fi,
Linux ARM <linux-arm-kernel@...ts.infradead.org>
Subject: Re: [PATCH v2 2/3] drm: Measure Self Refresh Entry/Exit times to
avoid thrashing
Hi Sean,
Since 5.4-rc1 my Samsung Chromebook Plus (kevin) doesn't
suspend/resume correctly, at least once every ten suspend/resume
cycles the display doesn't turn on, and when this happens the kernel
log message reports:
[ 60.420230] PM: suspend exit
[ 60.463866] rockchip-dp ff970000.edp: AUX CH cmd reply timeout!
[ 60.971653] rockchip-dp ff970000.edp: AUX CH enable timeout!
[ 61.478668] rockchip-dp ff970000.edp: AUX CH enable timeout!
[ 61.985661] rockchip-dp ff970000.edp: AUX CH enable timeout!
[ 62.492644] rockchip-dp ff970000.edp: AUX CH enable timeout!
[ 62.999617] rockchip-dp ff970000.edp: AUX CH enable timeout!
[ 63.506595] rockchip-dp ff970000.edp: AUX CH enable timeout!
[ 64.013678] rockchip-dp ff970000.edp: AUX CH enable timeout!
[ 64.522856] rockchip-dp ff970000.edp: AUX CH enable timeout!
[ 60.463866] rockchip-dp ff970000.edp: AUX CH cmd reply timeout!
[ 60.971653] rockchip-dp ff970000.edp: AUX CH enable timeout!
[ 61.478668] rockchip-dp ff970000.edp: AUX CH enable timeout!
[ 61.985661] rockchip-dp ff970000.edp: AUX CH enable timeout!
[ 62.492644] rockchip-dp ff970000.edp: AUX CH enable timeout!
...
Today I bisected the problem and pointed me to this commit. Reverting
the commit fixes the issue, but from I quick look I don't see any
obvious problem. I'll spend more time tomorrow looking at this but any
idea will be welcome.
Thanks,
Enric
Missatge de Sean Paul <sean@...rly.run> del dia dj., 19 de set. 2019 a
les 16:14:
>
> On Wed, Sep 18, 2019 at 04:07:29PM -0400, Sean Paul wrote:
> > From: Sean Paul <seanpaul@...omium.org>
> >
> > Currently the self refresh idle timer is a const set by the crtc. This
> > is fine if the self refresh entry/exit times are well-known for all
> > panels used on that crtc. However panels and workloads can vary quite a
> > bit, and a timeout which works well for one doesn't work well for
> > another.
> >
> > In the extreme, if the timeout is too short we could get in a situation
> > where the self refresh exits are taking so long we queue up a self refresh
> > entry before the exit commit is even finished.
> >
> > This patch changes the idle timeout to a moving average of the entry
> > times + a moving average of exit times + the crtc constant.
> >
> > This patch was tested on rockchip, with a kevin CrOS panel the idle
> > delay averages out to about ~235ms (35 entry + 100 exit + 100 const). On
> > the same board, the bob panel idle delay lands around ~340ms (90 entry
> > + 150 exit + 100 const).
> >
> > WRT the dedicated mutex in self_refresh_data, it would be nice if we
> > could rely on drm_crtc.mutex to protect the average times, but there are
> > a few reasons why a separate lock is a better choice:
> > - We can't rely on drm_crtc.mutex being held if we're doing a nonblocking
> > commit
> > - We can't grab drm_crtc.mutex since drm_modeset_lock() doesn't tell us
> > whether the lock was already held in the acquire context (it eats
> > -EALREADY), so we can't tell if we should drop it or not
> > - We don't need such a heavy-handed lock for what we're trying to do,
> > commit ordering doesn't matter, so a point-of-use lock will be less
> > contentious
> >
> > Reviewed-by: Daniel Vetter <daniel.vetter@...ll.ch>
>
> Pushed the first 2 to drm-misc-next-fixes to fix the gru-bob regression. I'll
> fix up the 3rd patch separately.
>
> Thank you for the reviews!
>
> Sean
>
> > Signed-off-by: Sean Paul <seanpaul@...omium.org>
> > Link to v1: https://patchwork.freedesktop.org/patch/msgid/20190917200443.64481-2-sean@poorly.run
> >
> > Changes in v2:
> > - Migrate locking explanation from comment to commit msg (Daniel)
> > - Turf constant entry delay and multiply the avg times by 2 (Daniel)
> > ---
> > drivers/gpu/drm/drm_atomic_helper.c | 20 ++++++
> > drivers/gpu/drm/drm_self_refresh_helper.c | 72 +++++++++++++++++++--
> > drivers/gpu/drm/rockchip/rockchip_drm_vop.c | 5 +-
> > include/drm/drm_self_refresh_helper.h | 6 +-
> > 4 files changed, 90 insertions(+), 13 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/drm_atomic_helper.c b/drivers/gpu/drm/drm_atomic_helper.c
> > index 9d7e4da6c292..3f13fa9a9e24 100644
> > --- a/drivers/gpu/drm/drm_atomic_helper.c
> > +++ b/drivers/gpu/drm/drm_atomic_helper.c
> > @@ -26,6 +26,7 @@
> > */
> >
> > #include <linux/dma-fence.h>
> > +#include <linux/ktime.h>
> >
> > #include <drm/drm_atomic.h>
> > #include <drm/drm_atomic_helper.h>
> > @@ -1570,9 +1571,23 @@ static void commit_tail(struct drm_atomic_state *old_state)
> > {
> > struct drm_device *dev = old_state->dev;
> > const struct drm_mode_config_helper_funcs *funcs;
> > + ktime_t start;
> > + s64 commit_time_ms;
> >
> > funcs = dev->mode_config.helper_private;
> >
> > + /*
> > + * We're measuring the _entire_ commit, so the time will vary depending
> > + * on how many fences and objects are involved. For the purposes of self
> > + * refresh, this is desirable since it'll give us an idea of how
> > + * congested things are. This will inform our decision on how often we
> > + * should enter self refresh after idle.
> > + *
> > + * These times will be averaged out in the self refresh helpers to avoid
> > + * overreacting over one outlier frame
> > + */
> > + start = ktime_get();
> > +
> > drm_atomic_helper_wait_for_fences(dev, old_state, false);
> >
> > drm_atomic_helper_wait_for_dependencies(old_state);
> > @@ -1582,6 +1597,11 @@ static void commit_tail(struct drm_atomic_state *old_state)
> > else
> > drm_atomic_helper_commit_tail(old_state);
> >
> > + commit_time_ms = ktime_ms_delta(ktime_get(), start);
> > + if (commit_time_ms > 0)
> > + drm_self_refresh_helper_update_avg_times(old_state,
> > + (unsigned long)commit_time_ms);
> > +
> > drm_atomic_helper_commit_cleanup_done(old_state);
> >
> > drm_atomic_state_put(old_state);
> > diff --git a/drivers/gpu/drm/drm_self_refresh_helper.c b/drivers/gpu/drm/drm_self_refresh_helper.c
> > index 9095cebf2147..68f4765a5896 100644
> > --- a/drivers/gpu/drm/drm_self_refresh_helper.c
> > +++ b/drivers/gpu/drm/drm_self_refresh_helper.c
> > @@ -5,6 +5,7 @@
> > * Authors:
> > * Sean Paul <seanpaul@...omium.org>
> > */
> > +#include <linux/average.h>
> > #include <linux/bitops.h>
> > #include <linux/slab.h>
> > #include <linux/workqueue.h>
> > @@ -50,10 +51,17 @@
> > * atomic_check when &drm_crtc_state.self_refresh_active is true.
> > */
> >
> > +#define SELF_REFRESH_AVG_SEED_MS 200
> > +
> > +DECLARE_EWMA(psr_time, 4, 4)
> > +
> > struct drm_self_refresh_data {
> > struct drm_crtc *crtc;
> > struct delayed_work entry_work;
> > - unsigned int entry_delay_ms;
> > +
> > + struct mutex avg_mutex;
> > + struct ewma_psr_time entry_avg_ms;
> > + struct ewma_psr_time exit_avg_ms;
> > };
> >
> > static void drm_self_refresh_helper_entry_work(struct work_struct *work)
> > @@ -121,6 +129,44 @@ static void drm_self_refresh_helper_entry_work(struct work_struct *work)
> > drm_modeset_acquire_fini(&ctx);
> > }
> >
> > +/**
> > + * drm_self_refresh_helper_update_avg_times - Updates a crtc's SR time averages
> > + * @state: the state which has just been applied to hardware
> > + * @commit_time_ms: the amount of time in ms that this commit took to complete
> > + *
> > + * Called after &drm_mode_config_funcs.atomic_commit_tail, this function will
> > + * update the average entry/exit self refresh times on self refresh transitions.
> > + * These averages will be used when calculating how long to delay before
> > + * entering self refresh mode after activity.
> > + */
> > +void drm_self_refresh_helper_update_avg_times(struct drm_atomic_state *state,
> > + unsigned int commit_time_ms)
> > +{
> > + struct drm_crtc *crtc;
> > + struct drm_crtc_state *old_crtc_state, *new_crtc_state;
> > + int i;
> > +
> > + for_each_oldnew_crtc_in_state(state, crtc, old_crtc_state,
> > + new_crtc_state, i) {
> > + struct drm_self_refresh_data *sr_data = crtc->self_refresh_data;
> > + struct ewma_psr_time *time;
> > +
> > + if (old_crtc_state->self_refresh_active ==
> > + new_crtc_state->self_refresh_active)
> > + continue;
> > +
> > + if (new_crtc_state->self_refresh_active)
> > + time = &sr_data->entry_avg_ms;
> > + else
> > + time = &sr_data->exit_avg_ms;
> > +
> > + mutex_lock(&sr_data->avg_mutex);
> > + ewma_psr_time_add(time, commit_time_ms);
> > + mutex_unlock(&sr_data->avg_mutex);
> > + }
> > +}
> > +EXPORT_SYMBOL(drm_self_refresh_helper_update_avg_times);
> > +
> > /**
> > * drm_self_refresh_helper_alter_state - Alters the atomic state for SR exit
> > * @state: the state currently being checked
> > @@ -152,6 +198,7 @@ void drm_self_refresh_helper_alter_state(struct drm_atomic_state *state)
> >
> > for_each_new_crtc_in_state(state, crtc, crtc_state, i) {
> > struct drm_self_refresh_data *sr_data;
> > + unsigned int delay;
> >
> > /* Don't trigger the entry timer when we're already in SR */
> > if (crtc_state->self_refresh_active)
> > @@ -161,8 +208,13 @@ void drm_self_refresh_helper_alter_state(struct drm_atomic_state *state)
> > if (!sr_data)
> > continue;
> >
> > + mutex_lock(&sr_data->avg_mutex);
> > + delay = (ewma_psr_time_read(&sr_data->entry_avg_ms) +
> > + ewma_psr_time_read(&sr_data->exit_avg_ms)) * 2;
> > + mutex_unlock(&sr_data->avg_mutex);
> > +
> > mod_delayed_work(system_wq, &sr_data->entry_work,
> > - msecs_to_jiffies(sr_data->entry_delay_ms));
> > + msecs_to_jiffies(delay));
> > }
> > }
> > EXPORT_SYMBOL(drm_self_refresh_helper_alter_state);
> > @@ -170,12 +222,10 @@ EXPORT_SYMBOL(drm_self_refresh_helper_alter_state);
> > /**
> > * drm_self_refresh_helper_init - Initializes self refresh helpers for a crtc
> > * @crtc: the crtc which supports self refresh supported displays
> > - * @entry_delay_ms: amount of inactivity to wait before entering self refresh
> > *
> > * Returns zero if successful or -errno on failure
> > */
> > -int drm_self_refresh_helper_init(struct drm_crtc *crtc,
> > - unsigned int entry_delay_ms)
> > +int drm_self_refresh_helper_init(struct drm_crtc *crtc)
> > {
> > struct drm_self_refresh_data *sr_data = crtc->self_refresh_data;
> >
> > @@ -189,8 +239,18 @@ int drm_self_refresh_helper_init(struct drm_crtc *crtc,
> >
> > INIT_DELAYED_WORK(&sr_data->entry_work,
> > drm_self_refresh_helper_entry_work);
> > - sr_data->entry_delay_ms = entry_delay_ms;
> > sr_data->crtc = crtc;
> > + mutex_init(&sr_data->avg_mutex);
> > + ewma_psr_time_init(&sr_data->entry_avg_ms);
> > + ewma_psr_time_init(&sr_data->exit_avg_ms);
> > +
> > + /*
> > + * Seed the averages so they're non-zero (and sufficiently large
> > + * for even poorly performing panels). As time goes on, this will be
> > + * averaged out and the values will trend to their true value.
> > + */
> > + ewma_psr_time_add(&sr_data->entry_avg_ms, SELF_REFRESH_AVG_SEED_MS);
> > + ewma_psr_time_add(&sr_data->exit_avg_ms, SELF_REFRESH_AVG_SEED_MS);
> >
> > crtc->self_refresh_data = sr_data;
> > return 0;
> > diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
> > index 2f821c58007c..613404f86668 100644
> > --- a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
> > +++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
> > @@ -39,8 +39,6 @@
> > #include "rockchip_drm_vop.h"
> > #include "rockchip_rgb.h"
> >
> > -#define VOP_SELF_REFRESH_ENTRY_DELAY_MS 100
> > -
> > #define VOP_WIN_SET(vop, win, name, v) \
> > vop_reg_set(vop, &win->phy->name, win->base, ~0, v, #name)
> > #define VOP_SCL_SET(vop, win, name, v) \
> > @@ -1563,8 +1561,7 @@ static int vop_create_crtc(struct vop *vop)
> > init_completion(&vop->line_flag_completion);
> > crtc->port = port;
> >
> > - ret = drm_self_refresh_helper_init(crtc,
> > - VOP_SELF_REFRESH_ENTRY_DELAY_MS);
> > + ret = drm_self_refresh_helper_init(crtc);
> > if (ret)
> > DRM_DEV_DEBUG_KMS(vop->dev,
> > "Failed to init %s with SR helpers %d, ignoring\n",
> > diff --git a/include/drm/drm_self_refresh_helper.h b/include/drm/drm_self_refresh_helper.h
> > index 397a583ccca7..5b79d253fb46 100644
> > --- a/include/drm/drm_self_refresh_helper.h
> > +++ b/include/drm/drm_self_refresh_helper.h
> > @@ -12,9 +12,9 @@ struct drm_atomic_state;
> > struct drm_crtc;
> >
> > void drm_self_refresh_helper_alter_state(struct drm_atomic_state *state);
> > +void drm_self_refresh_helper_update_avg_times(struct drm_atomic_state *state,
> > + unsigned int commit_time_ms);
> >
> > -int drm_self_refresh_helper_init(struct drm_crtc *crtc,
> > - unsigned int entry_delay_ms);
> > -
> > +int drm_self_refresh_helper_init(struct drm_crtc *crtc);
> > void drm_self_refresh_helper_cleanup(struct drm_crtc *crtc);
> > #endif
> > --
> > Sean Paul, Software Engineer, Google / Chromium OS
> >
>
> --
> Sean Paul, Software Engineer, Google / Chromium OS
> _______________________________________________
> dri-devel mailing list
> dri-devel@...ts.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
Powered by blists - more mailing lists