[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <1572848275-30941-1-git-send-email-peng.fan@nxp.com>
Date: Mon, 4 Nov 2019 06:19:30 +0000
From: Peng Fan <peng.fan@....com>
To: "catalin.marinas@....com" <catalin.marinas@....com>,
"will@...nel.org" <will@...nel.org>
CC: "olof@...om.net" <olof@...om.net>,
"mripard@...nel.org" <mripard@...nel.org>,
"bjorn.andersson@...aro.org" <bjorn.andersson@...aro.org>,
"dinguyen@...nel.org" <dinguyen@...nel.org>,
"shawnguo@...nel.org" <shawnguo@...nel.org>,
dl-linux-imx <linux-imx@....com>,
Anson Huang <anson.huang@....com>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
Leonard Crestez <leonard.crestez@....com>,
Peng Fan <peng.fan@....com>
Subject: [PATCH] arm64: defconfig: Change CONFIG_AT803X_PHY from m to y
From: Peng Fan <peng.fan@....com>
With phy-reset-gpios are enabled for i.MX8MM-EVK board, phy
will be reset. Without CONFIG_AT803X_PHY as y, board will stop
booting in NFS DHCP, because phy is not ready. So mark
CONFIG_AT803X_PHY from m to y to make board boot when using nfs rootfs.
Signed-off-by: Peng Fan <peng.fan@....com>
---
arch/arm64/configs/defconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index c9a867ac32d4..cd778c9ea8a4 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -285,7 +285,7 @@ CONFIG_SNI_AVE=y
CONFIG_SNI_NETSEC=y
CONFIG_STMMAC_ETH=m
CONFIG_MDIO_BUS_MUX_MMIOREG=y
-CONFIG_AT803X_PHY=m
+CONFIG_AT803X_PHY=y
CONFIG_MARVELL_PHY=m
CONFIG_MARVELL_10G_PHY=m
CONFIG_MESON_GXL_PHY=m
--
2.16.4
Powered by blists - more mailing lists