linux-kernel - [PATCH 2/4] ARM: dts: bcm2711: Enable PCIe controller

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <50074e33-17bf-d555-cbf6-4ec079472ecd@gmx.net>
Date:   Thu, 7 Nov 2019 18:44:00 +0100
From:   Stefan Wahren <wahrenst@....net>
To:     Nicolas Saenz Julienne <nsaenzjulienne@...e.de>,
        Andrew Murray <andrew.murray@....com>,
        linux-pci@...r.kernel.org, devicetree@...r.kernel.org,
        bcm-kernel-feedback-list@...adcom.com,
        linux-rpi-kernel@...ts.infradead.org,
        linux-arm-kernel@...ts.infradead.org,
        Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        Eric Anholt <eric@...olt.net>
Cc:     f.fainelli@...il.com, phil@...pberrypi.org,
        linux-kernel@...r.kernel.org, mbrugger@...e.com,
        james.quinlan@...adcom.com
Subject: [PATCH 2/4] ARM: dts: bcm2711: Enable PCIe controller

Hi Nicolas,

please move this patch behind the driver patches, which is the better order.

Am 06.11.19 um 22:45 schrieb Nicolas Saenz Julienne:
> This enables bcm2711's PCIe bus, wich is hardwired to a VIA Technologies
> XHCI USB 3.0 controller.
AFAIU this only applies to the Raspberry Pi 4, since the VIA is outside
of the SoC.
> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@...e.de>
> ---
>  arch/arm/boot/dts/bcm2711.dtsi | 47 ++++++++++++++++++++++++++++++++++
>  1 file changed, 47 insertions(+)
>
> diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi
> index a9d84e28f245..c7b2e7b57da6 100644
> --- a/arch/arm/boot/dts/bcm2711.dtsi
> +++ b/arch/arm/boot/dts/bcm2711.dtsi
> @@ -288,6 +288,53 @@
>  		arm,cpu-registers-not-fw-configured;
>  	};
>
> +	scb {
> +		compatible = "simple-bus";
> +		#address-cells = <2>;
> +		#size-cells = <1>;
> +
> +		ranges = <0x0 0x7c000000  0x0 0xfc000000  0x03800000>,
> +			 <0x6 0x00000000  0x6 0x00000000  0x40000000>;
> +
> +		pcie_0: pcie@...00000 {
> +			compatible = "brcm,bcm2711-pcie";
> +			reg = <0x0 0x7d500000 0x9310>;
> +			msi-controller;
> +			msi-parent = <&pcie_0>;
> +			#address-cells = <3>;
> +			#interrupt-cells = <1>;
> +			#size-cells = <2>;
> +			linux,pci-domain = <0>;
> +			brcm,enable-ssc;
> +			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-names = "pcie", "msi";
> +			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
> +			interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 143
> +							IRQ_TYPE_LEVEL_HIGH
> +					 0 0 0 2 &gicv2 GIC_SPI 144
> +							IRQ_TYPE_LEVEL_HIGH
> +					 0 0 0 3 &gicv2 GIC_SPI 145
> +							IRQ_TYPE_LEVEL_HIGH
> +					 0 0 0 4 &gicv2 GIC_SPI 146
> +							IRQ_TYPE_LEVEL_HIGH>;
> +
> +			ranges = <0x02000000 0x0 0xf8000000 0x6 0x00000000
> +				  0x0 0x04000000>;
> +			/*
> +			 * The wrapper around the PCIe block has a bug
> +			 * preventing it from accessing beyond the first 3GB of
> +			 * memory. As the bus DMA mask is rounded up to the
> +			 * closest power of two of the dma-range size, we're
> +			 * forced to set the limit at 2GB. This can be
> +			 * harmlessly changed in the future once the DMA code
> +			 * handles non power of two DMA limits.
> +			 */
> +			dma-ranges = <0x02000000 0x0 0x00000000 0x0 0x00000000
> +				      0x0 0x80000000>;
In case this bug will ever be fixed, do you see this as a future proof
practical solution?
> +		};
> +	};
> +
>  	cpus: cpus {
>  		#address-cells = <1>;
>  		#size-cells = <0>;