| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20191112004700.185304-1-abhishekpandit@chromium.org>
Date: Mon, 11 Nov 2019 16:47:00 -0800
From: Abhishek Pandit-Subedi <abhishekpandit@...omium.org>
To: Heiko Stuebner <heiko@...ech.de>
Cc: linux-bluetooth@...r.kernel.org, dianders@...omium.org,
linux-rockchip@...ts.infradead.org,
Abhishek Pandit-Subedi <abhishekpandit@...omium.org>,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
linux-arm-kernel@...ts.infradead.org
Subject: [PATCH] ARM: dts: rockchip: Add brcm bluetooth for rk3288-veyron
This enables the Broadcom uart bluetooth driver on uart0 and gives it
ownership of its gpios. In order to use this, you must enable the
following kconfig options:
- CONFIG_BT_HCIUART_BCM
- CONFIG_SERIAL_DEV
This is applicable to rk3288-veyron series boards that use the bcm43540
wifi+bt chips.
As part of this change, also refactor the pinctrl across the various
boards. All the boards using broadcom bluetooth shouldn't touch the
bt_dev_wake pin.
Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@...omium.org>
---
This patch enables using the Broadcom HCI UART driver with the
BCM43540 Wi-Fi + Bluetooth chip. This chip is used on a RK3288 based
board (Veyron) and these changes have been tested on the Minnie variant
of the board (i.e. rk3288-veyron-minnie.dts).
The changes are applicable to the minnie, mickey, speedy and brain
variants (all of which use the Broadcom chips). The bt-activity node was
removed for all Veyron boards and shouldn't affect the boards using
Marvell chips since they aren't using this out-of-band wakeup gpio.
A previous portion of this series adding the compatible string to the
hci_bcm driver has already been merged into bluetooth-next:
https://lore.kernel.org/r/4680AA6A-599F-4D5E-9A96-0655569BAE94@holtmann.org
There is also an ongoing series to fix up the baudrate settings and
configure the PCM parameters on bluetooth-next:
https://lore.kernel.org/linux-bluetooth/20191112001949.136377-1-abhishekpandit@chromium.org/
arch/arm/boot/dts/rk3288-veyron-brain.dts | 9 +++
.../dts/rk3288-veyron-broadcom-bluetooth.dtsi | 26 ++++++++
.../boot/dts/rk3288-veyron-chromebook.dtsi | 21 -------
arch/arm/boot/dts/rk3288-veyron-fievel.dts | 2 -
arch/arm/boot/dts/rk3288-veyron-jaq.dts | 22 +++++++
arch/arm/boot/dts/rk3288-veyron-jerry.dts | 22 +++++++
arch/arm/boot/dts/rk3288-veyron-mickey.dts | 9 +++
arch/arm/boot/dts/rk3288-veyron-minnie.dts | 21 +++++++
arch/arm/boot/dts/rk3288-veyron-pinky.dts | 22 +++++++
arch/arm/boot/dts/rk3288-veyron-speedy.dts | 21 +++++++
arch/arm/boot/dts/rk3288-veyron.dtsi | 59 +++----------------
11 files changed, 159 insertions(+), 75 deletions(-)
create mode 100644 arch/arm/boot/dts/rk3288-veyron-broadcom-bluetooth.dtsi
diff --git a/arch/arm/boot/dts/rk3288-veyron-brain.dts b/arch/arm/boot/dts/rk3288-veyron-brain.dts
index 406146cbff29..aa33d09184ad 100644
--- a/arch/arm/boot/dts/rk3288-veyron-brain.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-brain.dts
@@ -7,6 +7,7 @@
/dts-v1/;
#include "rk3288-veyron.dtsi"
+#include "rk3288-veyron-broadcom-bluetooth.dtsi"
/ {
model = "Google Brain";
@@ -40,6 +41,14 @@
};
&pinctrl {
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ /* Common for sleep and wake, but no owners */
+ &ddr0_retention
+ &ddrio_pwroff
+ &global_pwroff
+ >;
+
hdmi {
vcc50_hdmi_en: vcc50-hdmi-en {
rockchip,pins = <7 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
diff --git a/arch/arm/boot/dts/rk3288-veyron-broadcom-bluetooth.dtsi b/arch/arm/boot/dts/rk3288-veyron-broadcom-bluetooth.dtsi
new file mode 100644
index 000000000000..ffa14049c3b5
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-veyron-broadcom-bluetooth.dtsi
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Veyron (and derivatives) fragment for the Broadcom 43450 bluetooth
+ * chip.
+ *
+ * Copyright 2019 Google, Inc
+ */
+
+&uart0 {
+ bluetooth {
+ pinctrl-names = "default";
+ pinctrl-0 = <&bt_host_wake_l>, <&bt_enable_l>,
+ <&bt_dev_wake>;
+
+ compatible = "brcm,bcm43540-bt";
+ host-wakeup-gpios = <&gpio4 RK_PD7 GPIO_ACTIVE_HIGH>;
+ shutdown-gpios = <&gpio4 RK_PD5 GPIO_ACTIVE_HIGH>;
+ device-wakeup-gpios = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
+ max-speed = <3000000>;
+
+ brcm,bt-sco-routing = [01];
+ brcm,pcm-interface-rate = [02];
+ brcm,pcm-sync-mode = [01];
+ brcm,pcm-clock-mode = [01];
+ };
+};
diff --git a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi
index ffb60f880b39..05112c25176d 100644
--- a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi
+++ b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi
@@ -136,27 +136,6 @@
};
&pinctrl {
- pinctrl-0 = <
- /* Common for sleep and wake, but no owners */
- &ddr0_retention
- &ddrio_pwroff
- &global_pwroff
-
- /* Wake only */
- &suspend_l_wake
- &bt_dev_wake_awake
- >;
- pinctrl-1 = <
- /* Common for sleep and wake, but no owners */
- &ddr0_retention
- &ddrio_pwroff
- &global_pwroff
-
- /* Sleep only */
- &suspend_l_sleep
- &bt_dev_wake_sleep
- >;
-
buttons {
ap_lid_int_l: ap-lid-int-l {
rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
diff --git a/arch/arm/boot/dts/rk3288-veyron-fievel.dts b/arch/arm/boot/dts/rk3288-veyron-fievel.dts
index 9a0f55085839..7e7ef8e06b8d 100644
--- a/arch/arm/boot/dts/rk3288-veyron-fievel.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-fievel.dts
@@ -18,8 +18,6 @@
"google,veyron-fievel-rev0", "google,veyron-fievel",
"google,veyron", "rockchip,rk3288";
- /delete-node/ bt-activity;
-
vccsys: vccsys {
compatible = "regulator-fixed";
regulator-name = "vccsys";
diff --git a/arch/arm/boot/dts/rk3288-veyron-jaq.dts b/arch/arm/boot/dts/rk3288-veyron-jaq.dts
index a4966e505a2f..171ba6185b6d 100644
--- a/arch/arm/boot/dts/rk3288-veyron-jaq.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-jaq.dts
@@ -273,6 +273,28 @@
};
&pinctrl {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <
+ /* Common for sleep and wake, but no owners */
+ &ddr0_retention
+ &ddrio_pwroff
+ &global_pwroff
+
+ /* Wake only */
+ &suspend_l_wake
+ &bt_dev_wake_awake
+ >;
+ pinctrl-1 = <
+ /* Common for sleep and wake, but no owners */
+ &ddr0_retention
+ &ddrio_pwroff
+ &global_pwroff
+
+ /* Sleep only */
+ &suspend_l_sleep
+ &bt_dev_wake_sleep
+ >;
+
buck-5v {
drv_5v: drv-5v {
rockchip,pins = <7 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
diff --git a/arch/arm/boot/dts/rk3288-veyron-jerry.dts b/arch/arm/boot/dts/rk3288-veyron-jerry.dts
index a6ee44f0fe13..66f00d28801a 100644
--- a/arch/arm/boot/dts/rk3288-veyron-jerry.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-jerry.dts
@@ -418,6 +418,28 @@
};
&pinctrl {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <
+ /* Common for sleep and wake, but no owners */
+ &ddr0_retention
+ &ddrio_pwroff
+ &global_pwroff
+
+ /* Wake only */
+ &suspend_l_wake
+ &bt_dev_wake_awake
+ >;
+ pinctrl-1 = <
+ /* Common for sleep and wake, but no owners */
+ &ddr0_retention
+ &ddrio_pwroff
+ &global_pwroff
+
+ /* Sleep only */
+ &suspend_l_sleep
+ &bt_dev_wake_sleep
+ >;
+
buck-5v {
drv_5v: drv-5v {
rockchip,pins = <7 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
diff --git a/arch/arm/boot/dts/rk3288-veyron-mickey.dts b/arch/arm/boot/dts/rk3288-veyron-mickey.dts
index 06a6a9554c48..ffd1121d19be 100644
--- a/arch/arm/boot/dts/rk3288-veyron-mickey.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-mickey.dts
@@ -7,6 +7,7 @@
/dts-v1/;
#include "rk3288-veyron.dtsi"
+#include "rk3288-veyron-broadcom-bluetooth.dtsi"
/ {
model = "Google Mickey";
@@ -411,6 +412,14 @@
};
&pinctrl {
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ /* Common for sleep and wake, but no owners */
+ &ddr0_retention
+ &ddrio_pwroff
+ &global_pwroff
+ >;
+
hdmi {
power_hdmi_on: power-hdmi-on {
rockchip,pins = <7 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
diff --git a/arch/arm/boot/dts/rk3288-veyron-minnie.dts b/arch/arm/boot/dts/rk3288-veyron-minnie.dts
index c833716dbe48..39f76e02875f 100644
--- a/arch/arm/boot/dts/rk3288-veyron-minnie.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-minnie.dts
@@ -7,6 +7,7 @@
/dts-v1/;
#include "rk3288-veyron-chromebook.dtsi"
+#include "rk3288-veyron-broadcom-bluetooth.dtsi"
/ {
model = "Google Minnie";
@@ -344,6 +345,26 @@
};
&pinctrl {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <
+ /* Common for sleep and wake, but no owners */
+ &ddr0_retention
+ &ddrio_pwroff
+ &global_pwroff
+
+ /* Wake only */
+ &suspend_l_wake
+ >;
+ pinctrl-1 = <
+ /* Common for sleep and wake, but no owners */
+ &ddr0_retention
+ &ddrio_pwroff
+ &global_pwroff
+
+ /* Sleep only */
+ &suspend_l_sleep
+ >;
+
buck-5v {
drv_5v: drv-5v {
rockchip,pins = <7 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
diff --git a/arch/arm/boot/dts/rk3288-veyron-pinky.dts b/arch/arm/boot/dts/rk3288-veyron-pinky.dts
index f420499f300a..71e6629cc208 100644
--- a/arch/arm/boot/dts/rk3288-veyron-pinky.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-pinky.dts
@@ -64,6 +64,28 @@
};
&pinctrl {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <
+ /* Common for sleep and wake, but no owners */
+ &ddr0_retention
+ &ddrio_pwroff
+ &global_pwroff
+
+ /* Wake only */
+ &suspend_l_wake
+ &bt_dev_wake_awake
+ >;
+ pinctrl-1 = <
+ /* Common for sleep and wake, but no owners */
+ &ddr0_retention
+ &ddrio_pwroff
+ &global_pwroff
+
+ /* Sleep only */
+ &suspend_l_sleep
+ &bt_dev_wake_sleep
+ >;
+
/delete-node/ lcd;
backlight {
diff --git a/arch/arm/boot/dts/rk3288-veyron-speedy.dts b/arch/arm/boot/dts/rk3288-veyron-speedy.dts
index 2f2989bc3f9c..e354c61a45e7 100644
--- a/arch/arm/boot/dts/rk3288-veyron-speedy.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-speedy.dts
@@ -7,6 +7,7 @@
/dts-v1/;
#include "rk3288-veyron-chromebook.dtsi"
+#include "rk3288-veyron-broadcom-bluetooth.dtsi"
#include "cros-ec-sbs.dtsi"
/ {
@@ -279,6 +280,26 @@
};
&pinctrl {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <
+ /* Common for sleep and wake, but no owners */
+ &ddr0_retention
+ &ddrio_pwroff
+ &global_pwroff
+
+ /* Wake only */
+ &suspend_l_wake
+ >;
+ pinctrl-1 = <
+ /* Common for sleep and wake, but no owners */
+ &ddr0_retention
+ &ddrio_pwroff
+ &global_pwroff
+
+ /* Sleep only */
+ &suspend_l_sleep
+ >;
+
buck-5v {
drv_5v: drv-5v {
rockchip,pins = <7 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
diff --git a/arch/arm/boot/dts/rk3288-veyron.dtsi b/arch/arm/boot/dts/rk3288-veyron.dtsi
index 7525e3dd1fc1..54a6838d73f5 100644
--- a/arch/arm/boot/dts/rk3288-veyron.dtsi
+++ b/arch/arm/boot/dts/rk3288-veyron.dtsi
@@ -23,30 +23,6 @@
reg = <0x0 0x0 0x0 0x80000000>;
};
- bt_activity: bt-activity {
- compatible = "gpio-keys";
- pinctrl-names = "default";
- pinctrl-0 = <&bt_host_wake>;
-
- /*
- * HACK: until we have an LPM driver, we'll use an
- * ugly GPIO key to allow Bluetooth to wake from S3.
- * This is expected to only be used by BT modules that
- * use UART for comms. For BT modules that talk over
- * SDIO we should use a wakeup mechanism related to SDIO.
- *
- * Use KEY_RESERVED here since that will work as a wakeup but
- * doesn't get reported to higher levels (so doesn't confuse
- * Chrome).
- */
- bt-wake {
- label = "BT Wakeup";
- gpios = <&gpio4 RK_PD7 GPIO_ACTIVE_HIGH>;
- linux,code = <KEY_RESERVED>;
- wakeup-source;
- };
-
- };
power_button: power-button {
compatible = "gpio-keys";
@@ -82,22 +58,17 @@
clocks = <&rk808 RK808_CLKOUT1>;
clock-names = "ext_clock";
pinctrl-names = "default";
- pinctrl-0 = <&bt_enable_l>, <&wifi_enable_h>;
+ pinctrl-0 = <&wifi_enable_h>;
/*
- * Depending on the actual card populated GPIO4 D4 and D5
+ * Depending on the actual card populated GPIO4 D4
* correspond to one of these signals on the module:
*
* D4:
* - SDIO_RESET_L_WL_REG_ON
* - PDN (power down when low)
- *
- * D5:
- * - BT_I2S_WS_BT_RFDISABLE_L
- * - No connect
*/
- reset-gpios = <&gpio4 RK_PD4 GPIO_ACTIVE_LOW>,
- <&gpio4 RK_PD5 GPIO_ACTIVE_LOW>;
+ reset-gpios = <&gpio4 RK_PD4 GPIO_ACTIVE_LOW>;
};
vcc_5v: vcc-5v {
@@ -481,26 +452,6 @@
};
&pinctrl {
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <
- /* Common for sleep and wake, but no owners */
- &ddr0_retention
- &ddrio_pwroff
- &global_pwroff
-
- /* Wake only */
- &bt_dev_wake_awake
- >;
- pinctrl-1 = <
- /* Common for sleep and wake, but no owners */
- &ddr0_retention
- &ddrio_pwroff
- &global_pwroff
-
- /* Sleep only */
- &bt_dev_wake_sleep
- >;
-
pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma {
bias-disable;
drive-strength = <8>;
@@ -622,6 +573,10 @@
bt_dev_wake_awake: bt-dev-wake-awake {
rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_output_high>;
};
+
+ bt_dev_wake: bt-dev-wake {
+ rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
};
tpm {
--
2.24.0.rc1.363.gb1bccd3e3d-goog
Powered by blists - more mailing lists