lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:   Thu, 14 Nov 2019 14:45:22 +0100
From:   Heiko Stuebner <heiko@...ech.de>
To:     Abhishek Pandit-Subedi <abhishekpandit@...omium.org>
Cc:     linux-bluetooth@...r.kernel.org, dianders@...omium.org,
        linux-rockchip@...ts.infradead.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org, Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH] ARM: dts: rockchip: Add brcm bluetooth for rk3288-veyron

Hi,

Am Dienstag, 12. November 2019, 01:47:00 CET schrieb Abhishek Pandit-Subedi:
> This enables the Broadcom uart bluetooth driver on uart0 and gives it
> ownership of its gpios. In order to use this, you must enable the
> following kconfig options:
> - CONFIG_BT_HCIUART_BCM
> - CONFIG_SERIAL_DEV
> 
> This is applicable to rk3288-veyron series boards that use the bcm43540
> wifi+bt chips.
> 
> As part of this change, also refactor the pinctrl across the various
> boards. All the boards using broadcom bluetooth shouldn't touch the
> bt_dev_wake pin.
> 
> Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@...omium.org>

looks good to me
@dianders: does this look ok to you too?

Just to confirm, I guess mickey and brain do not have the suspend_l pin
settings? [They only seem to get the default pinctrl state but not the
sleep state in @pinctrl]

Thanks
Heiko


> ---
> 
> This patch enables using the Broadcom HCI UART driver with the
> BCM43540 Wi-Fi + Bluetooth chip. This chip is used on a RK3288 based
> board (Veyron) and these changes have been tested on the Minnie variant
> of the board (i.e. rk3288-veyron-minnie.dts).
> 
> The changes are applicable to the minnie, mickey, speedy and brain
> variants (all of which use the Broadcom chips). The bt-activity node was
> removed for all Veyron boards and shouldn't affect the boards using
> Marvell chips since they aren't using this out-of-band wakeup gpio.
> 
> A previous portion of this series adding the compatible string to the
> hci_bcm driver has already been merged into bluetooth-next:
> https://lore.kernel.org/r/4680AA6A-599F-4D5E-9A96-0655569BAE94@holtmann.org
> 
> There is also an ongoing series to fix up the baudrate settings and
> configure the PCM parameters on bluetooth-next:
> https://lore.kernel.org/linux-bluetooth/20191112001949.136377-1-abhishekpandit@chromium.org/
> 
> 
>  arch/arm/boot/dts/rk3288-veyron-brain.dts     |  9 +++
>  .../dts/rk3288-veyron-broadcom-bluetooth.dtsi | 26 ++++++++
>  .../boot/dts/rk3288-veyron-chromebook.dtsi    | 21 -------
>  arch/arm/boot/dts/rk3288-veyron-fievel.dts    |  2 -
>  arch/arm/boot/dts/rk3288-veyron-jaq.dts       | 22 +++++++
>  arch/arm/boot/dts/rk3288-veyron-jerry.dts     | 22 +++++++
>  arch/arm/boot/dts/rk3288-veyron-mickey.dts    |  9 +++
>  arch/arm/boot/dts/rk3288-veyron-minnie.dts    | 21 +++++++
>  arch/arm/boot/dts/rk3288-veyron-pinky.dts     | 22 +++++++
>  arch/arm/boot/dts/rk3288-veyron-speedy.dts    | 21 +++++++
>  arch/arm/boot/dts/rk3288-veyron.dtsi          | 59 +++----------------
>  11 files changed, 159 insertions(+), 75 deletions(-)
>  create mode 100644 arch/arm/boot/dts/rk3288-veyron-broadcom-bluetooth.dtsi
> 
> diff --git a/arch/arm/boot/dts/rk3288-veyron-brain.dts b/arch/arm/boot/dts/rk3288-veyron-brain.dts
> index 406146cbff29..aa33d09184ad 100644
> --- a/arch/arm/boot/dts/rk3288-veyron-brain.dts
> +++ b/arch/arm/boot/dts/rk3288-veyron-brain.dts
> @@ -7,6 +7,7 @@
>  
>  /dts-v1/;
>  #include "rk3288-veyron.dtsi"
> +#include "rk3288-veyron-broadcom-bluetooth.dtsi"
>  
>  / {
>  	model = "Google Brain";
> @@ -40,6 +41,14 @@
>  };
>  
>  &pinctrl {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <
> +		/* Common for sleep and wake, but no owners */
> +		&ddr0_retention
> +		&ddrio_pwroff
> +		&global_pwroff
> +	>;
> +
>  	hdmi {
>  		vcc50_hdmi_en: vcc50-hdmi-en {
>  			rockchip,pins = <7 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
> diff --git a/arch/arm/boot/dts/rk3288-veyron-broadcom-bluetooth.dtsi b/arch/arm/boot/dts/rk3288-veyron-broadcom-bluetooth.dtsi
> new file mode 100644
> index 000000000000..ffa14049c3b5
> --- /dev/null
> +++ b/arch/arm/boot/dts/rk3288-veyron-broadcom-bluetooth.dtsi
> @@ -0,0 +1,26 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Google Veyron (and derivatives) fragment for the Broadcom 43450 bluetooth
> + * chip.
> + *
> + * Copyright 2019 Google, Inc
> + */
> +
> +&uart0 {
> +	bluetooth {
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&bt_host_wake_l>, <&bt_enable_l>,
> +			    <&bt_dev_wake>;
> +
> +		compatible = "brcm,bcm43540-bt";
> +		host-wakeup-gpios	= <&gpio4 RK_PD7 GPIO_ACTIVE_HIGH>;
> +		shutdown-gpios		= <&gpio4 RK_PD5 GPIO_ACTIVE_HIGH>;
> +		device-wakeup-gpios	= <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
> +		max-speed		= <3000000>;
> +
> +		brcm,bt-sco-routing	= [01];
> +		brcm,pcm-interface-rate	= [02];
> +		brcm,pcm-sync-mode	= [01];
> +		brcm,pcm-clock-mode	= [01];
> +	};
> +};
> diff --git a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi
> index ffb60f880b39..05112c25176d 100644
> --- a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi
> +++ b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi
> @@ -136,27 +136,6 @@
>  };
>  
>  &pinctrl {
> -	pinctrl-0 = <
> -		/* Common for sleep and wake, but no owners */
> -		&ddr0_retention
> -		&ddrio_pwroff
> -		&global_pwroff
> -
> -		/* Wake only */
> -		&suspend_l_wake
> -		&bt_dev_wake_awake
> -	>;
> -	pinctrl-1 = <
> -		/* Common for sleep and wake, but no owners */
> -		&ddr0_retention
> -		&ddrio_pwroff
> -		&global_pwroff
> -
> -		/* Sleep only */
> -		&suspend_l_sleep
> -		&bt_dev_wake_sleep
> -	>;
> -
>  	buttons {
>  		ap_lid_int_l: ap-lid-int-l {
>  			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
> diff --git a/arch/arm/boot/dts/rk3288-veyron-fievel.dts b/arch/arm/boot/dts/rk3288-veyron-fievel.dts
> index 9a0f55085839..7e7ef8e06b8d 100644
> --- a/arch/arm/boot/dts/rk3288-veyron-fievel.dts
> +++ b/arch/arm/boot/dts/rk3288-veyron-fievel.dts
> @@ -18,8 +18,6 @@
>  		     "google,veyron-fievel-rev0", "google,veyron-fievel",
>  		     "google,veyron", "rockchip,rk3288";
>  
> -	/delete-node/ bt-activity;
> -
>  	vccsys: vccsys {
>  		compatible = "regulator-fixed";
>  		regulator-name = "vccsys";
> diff --git a/arch/arm/boot/dts/rk3288-veyron-jaq.dts b/arch/arm/boot/dts/rk3288-veyron-jaq.dts
> index a4966e505a2f..171ba6185b6d 100644
> --- a/arch/arm/boot/dts/rk3288-veyron-jaq.dts
> +++ b/arch/arm/boot/dts/rk3288-veyron-jaq.dts
> @@ -273,6 +273,28 @@
>  };
>  
>  &pinctrl {
> +	pinctrl-names = "default", "sleep";
> +	pinctrl-0 = <
> +		/* Common for sleep and wake, but no owners */
> +		&ddr0_retention
> +		&ddrio_pwroff
> +		&global_pwroff
> +
> +		/* Wake only */
> +		&suspend_l_wake
> +		&bt_dev_wake_awake
> +	>;
> +	pinctrl-1 = <
> +		/* Common for sleep and wake, but no owners */
> +		&ddr0_retention
> +		&ddrio_pwroff
> +		&global_pwroff
> +
> +		/* Sleep only */
> +		&suspend_l_sleep
> +		&bt_dev_wake_sleep
> +	>;
> +
>  	buck-5v {
>  		drv_5v: drv-5v {
>  			rockchip,pins = <7 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
> diff --git a/arch/arm/boot/dts/rk3288-veyron-jerry.dts b/arch/arm/boot/dts/rk3288-veyron-jerry.dts
> index a6ee44f0fe13..66f00d28801a 100644
> --- a/arch/arm/boot/dts/rk3288-veyron-jerry.dts
> +++ b/arch/arm/boot/dts/rk3288-veyron-jerry.dts
> @@ -418,6 +418,28 @@
>  };
>  
>  &pinctrl {
> +	pinctrl-names = "default", "sleep";
> +	pinctrl-0 = <
> +		/* Common for sleep and wake, but no owners */
> +		&ddr0_retention
> +		&ddrio_pwroff
> +		&global_pwroff
> +
> +		/* Wake only */
> +		&suspend_l_wake
> +		&bt_dev_wake_awake
> +	>;
> +	pinctrl-1 = <
> +		/* Common for sleep and wake, but no owners */
> +		&ddr0_retention
> +		&ddrio_pwroff
> +		&global_pwroff
> +
> +		/* Sleep only */
> +		&suspend_l_sleep
> +		&bt_dev_wake_sleep
> +	>;
> +
>  	buck-5v {
>  		drv_5v: drv-5v {
>  			rockchip,pins = <7 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
> diff --git a/arch/arm/boot/dts/rk3288-veyron-mickey.dts b/arch/arm/boot/dts/rk3288-veyron-mickey.dts
> index 06a6a9554c48..ffd1121d19be 100644
> --- a/arch/arm/boot/dts/rk3288-veyron-mickey.dts
> +++ b/arch/arm/boot/dts/rk3288-veyron-mickey.dts
> @@ -7,6 +7,7 @@
>  
>  /dts-v1/;
>  #include "rk3288-veyron.dtsi"
> +#include "rk3288-veyron-broadcom-bluetooth.dtsi"
>  
>  / {
>  	model = "Google Mickey";
> @@ -411,6 +412,14 @@
>  };
>  
>  &pinctrl {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <
> +		/* Common for sleep and wake, but no owners */
> +		&ddr0_retention
> +		&ddrio_pwroff
> +		&global_pwroff
> +	>;
> +
>  	hdmi {
>  		power_hdmi_on: power-hdmi-on {
>  			rockchip,pins = <7 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
> diff --git a/arch/arm/boot/dts/rk3288-veyron-minnie.dts b/arch/arm/boot/dts/rk3288-veyron-minnie.dts
> index c833716dbe48..39f76e02875f 100644
> --- a/arch/arm/boot/dts/rk3288-veyron-minnie.dts
> +++ b/arch/arm/boot/dts/rk3288-veyron-minnie.dts
> @@ -7,6 +7,7 @@
>  
>  /dts-v1/;
>  #include "rk3288-veyron-chromebook.dtsi"
> +#include "rk3288-veyron-broadcom-bluetooth.dtsi"
>  
>  / {
>  	model = "Google Minnie";
> @@ -344,6 +345,26 @@
>  };
>  
>  &pinctrl {
> +	pinctrl-names = "default", "sleep";
> +	pinctrl-0 = <
> +		/* Common for sleep and wake, but no owners */
> +		&ddr0_retention
> +		&ddrio_pwroff
> +		&global_pwroff
> +
> +		/* Wake only */
> +		&suspend_l_wake
> +	>;
> +	pinctrl-1 = <
> +		/* Common for sleep and wake, but no owners */
> +		&ddr0_retention
> +		&ddrio_pwroff
> +		&global_pwroff
> +
> +		/* Sleep only */
> +		&suspend_l_sleep
> +	>;
> +
>  	buck-5v {
>  		drv_5v: drv-5v {
>  			rockchip,pins = <7 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
> diff --git a/arch/arm/boot/dts/rk3288-veyron-pinky.dts b/arch/arm/boot/dts/rk3288-veyron-pinky.dts
> index f420499f300a..71e6629cc208 100644
> --- a/arch/arm/boot/dts/rk3288-veyron-pinky.dts
> +++ b/arch/arm/boot/dts/rk3288-veyron-pinky.dts
> @@ -64,6 +64,28 @@
>  };
>  
>  &pinctrl {
> +	pinctrl-names = "default", "sleep";
> +	pinctrl-0 = <
> +		/* Common for sleep and wake, but no owners */
> +		&ddr0_retention
> +		&ddrio_pwroff
> +		&global_pwroff
> +
> +		/* Wake only */
> +		&suspend_l_wake
> +		&bt_dev_wake_awake
> +	>;
> +	pinctrl-1 = <
> +		/* Common for sleep and wake, but no owners */
> +		&ddr0_retention
> +		&ddrio_pwroff
> +		&global_pwroff
> +
> +		/* Sleep only */
> +		&suspend_l_sleep
> +		&bt_dev_wake_sleep
> +	>;
> +
>  	/delete-node/ lcd;
>  
>  	backlight {
> diff --git a/arch/arm/boot/dts/rk3288-veyron-speedy.dts b/arch/arm/boot/dts/rk3288-veyron-speedy.dts
> index 2f2989bc3f9c..e354c61a45e7 100644
> --- a/arch/arm/boot/dts/rk3288-veyron-speedy.dts
> +++ b/arch/arm/boot/dts/rk3288-veyron-speedy.dts
> @@ -7,6 +7,7 @@
>  
>  /dts-v1/;
>  #include "rk3288-veyron-chromebook.dtsi"
> +#include "rk3288-veyron-broadcom-bluetooth.dtsi"
>  #include "cros-ec-sbs.dtsi"
>  
>  / {
> @@ -279,6 +280,26 @@
>  };
>  
>  &pinctrl {
> +	pinctrl-names = "default", "sleep";
> +	pinctrl-0 = <
> +		/* Common for sleep and wake, but no owners */
> +		&ddr0_retention
> +		&ddrio_pwroff
> +		&global_pwroff
> +
> +		/* Wake only */
> +		&suspend_l_wake
> +	>;
> +	pinctrl-1 = <
> +		/* Common for sleep and wake, but no owners */
> +		&ddr0_retention
> +		&ddrio_pwroff
> +		&global_pwroff
> +
> +		/* Sleep only */
> +		&suspend_l_sleep
> +	>;
> +
>  	buck-5v {
>  		drv_5v: drv-5v {
>  			rockchip,pins = <7 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
> diff --git a/arch/arm/boot/dts/rk3288-veyron.dtsi b/arch/arm/boot/dts/rk3288-veyron.dtsi
> index 7525e3dd1fc1..54a6838d73f5 100644
> --- a/arch/arm/boot/dts/rk3288-veyron.dtsi
> +++ b/arch/arm/boot/dts/rk3288-veyron.dtsi
> @@ -23,30 +23,6 @@
>  		reg = <0x0 0x0 0x0 0x80000000>;
>  	};
>  
> -	bt_activity: bt-activity {
> -		compatible = "gpio-keys";
> -		pinctrl-names = "default";
> -		pinctrl-0 = <&bt_host_wake>;
> -
> -		/*
> -		 * HACK: until we have an LPM driver, we'll use an
> -		 * ugly GPIO key to allow Bluetooth to wake from S3.
> -		 * This is expected to only be used by BT modules that
> -		 * use UART for comms.  For BT modules that talk over
> -		 * SDIO we should use a wakeup mechanism related to SDIO.
> -		 *
> -		 * Use KEY_RESERVED here since that will work as a wakeup but
> -		 * doesn't get reported to higher levels (so doesn't confuse
> -		 * Chrome).
> -		 */
> -		bt-wake {
> -			label = "BT Wakeup";
> -			gpios = <&gpio4 RK_PD7 GPIO_ACTIVE_HIGH>;
> -			linux,code = <KEY_RESERVED>;
> -			wakeup-source;
> -		};
> -
> -	};
>  
>  	power_button: power-button {
>  		compatible = "gpio-keys";
> @@ -82,22 +58,17 @@
>  		clocks = <&rk808 RK808_CLKOUT1>;
>  		clock-names = "ext_clock";
>  		pinctrl-names = "default";
> -		pinctrl-0 = <&bt_enable_l>, <&wifi_enable_h>;
> +		pinctrl-0 = <&wifi_enable_h>;
>  
>  		/*
> -		 * Depending on the actual card populated GPIO4 D4 and D5
> +		 * Depending on the actual card populated GPIO4 D4
>  		 * correspond to one of these signals on the module:
>  		 *
>  		 * D4:
>  		 * - SDIO_RESET_L_WL_REG_ON
>  		 * - PDN (power down when low)
> -		 *
> -		 * D5:
> -		 * - BT_I2S_WS_BT_RFDISABLE_L
> -		 * - No connect
>  		 */
> -		reset-gpios = <&gpio4 RK_PD4 GPIO_ACTIVE_LOW>,
> -			      <&gpio4 RK_PD5 GPIO_ACTIVE_LOW>;
> +		reset-gpios = <&gpio4 RK_PD4 GPIO_ACTIVE_LOW>;
>  	};
>  
>  	vcc_5v: vcc-5v {
> @@ -481,26 +452,6 @@
>  };
>  
>  &pinctrl {
> -	pinctrl-names = "default", "sleep";
> -	pinctrl-0 = <
> -		/* Common for sleep and wake, but no owners */
> -		&ddr0_retention
> -		&ddrio_pwroff
> -		&global_pwroff
> -
> -		/* Wake only */
> -		&bt_dev_wake_awake
> -	>;
> -	pinctrl-1 = <
> -		/* Common for sleep and wake, but no owners */
> -		&ddr0_retention
> -		&ddrio_pwroff
> -		&global_pwroff
> -
> -		/* Sleep only */
> -		&bt_dev_wake_sleep
> -	>;
> -
>  	pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma {
>  		bias-disable;
>  		drive-strength = <8>;
> @@ -622,6 +573,10 @@
>  		bt_dev_wake_awake: bt-dev-wake-awake {
>  			rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_output_high>;
>  		};
> +
> +		bt_dev_wake: bt-dev-wake {
> +			rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
> +		};
>  	};
>  
>  	tpm {
> 




Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ