| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20191112145347.23519-21-bparrot@ti.com>
Date: Tue, 12 Nov 2019 08:53:47 -0600
From: Benoit Parrot <bparrot@...com>
To: Hans Verkuil <hverkuil@...all.nl>,
Sakari Ailus <sakari.ailus@...ux.intel.com>,
Rob Herring <robh+dt@...nel.org>
CC: <linux-media@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, Benoit Parrot <bparrot@...com>
Subject: [RESEND Patch v3 20/20] dt-bindings: media: cal: convert binding to yaml
Convert ti-cal.txt to ti,cal.yaml.
Add ti,cal.yaml to the MAINTAINERS file.
Signed-off-by: Benoit Parrot <bparrot@...com>
---
.../devicetree/bindings/media/ti,cal.yaml | 202 ++++++++++++++++++
.../devicetree/bindings/media/ti-cal.txt | 81 -------
MAINTAINERS | 1 +
3 files changed, 203 insertions(+), 81 deletions(-)
create mode 100644 Documentation/devicetree/bindings/media/ti,cal.yaml
delete mode 100644 Documentation/devicetree/bindings/media/ti-cal.txt
diff --git a/Documentation/devicetree/bindings/media/ti,cal.yaml b/Documentation/devicetree/bindings/media/ti,cal.yaml
new file mode 100644
index 000000000000..1ea784179536
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/ti,cal.yaml
@@ -0,0 +1,202 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/ti,cal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments DRA72x CAMERA ADAPTATION LAYER (CAL) Device Tree Bindings
+
+maintainers:
+ - Benoit Parrot <bparrot@...com>
+
+description: |-
+ The Camera Adaptation Layer (CAL) is a key component for image capture
+ applications. The capture module provides the system interface and the
+ processing capability to connect CSI2 image-sensor modules to the
+ DRA72x device.
+
+ CAL supports 2 camera port nodes on MIPI bus. Each CSI2 camera port nodes
+ should contain a 'port' child node with child 'endpoint' node. Please
+ refer to the bindings defined in
+ Documentation/devicetree/bindings/media/video-interfaces.txt.
+
+properties:
+ compatible:
+ enum:
+ # for DRA72 controllers
+ - ti,dra72-cal
+ # for DRA72 controllers pre ES2.0
+ - ti,dra72-pre-es2-cal
+ # for DRA76 controllers
+ - ti,dra76-cal
+ # for AM654 controllers
+ - ti,am654-cal
+
+ reg:
+ minItems: 2
+ items:
+ - description: The CAL main register region
+ - description: The RX Core0 (DPHY0) register region
+ - description: The RX Core1 (DPHY1) register region
+
+ reg-names:
+ minItems: 2
+ items:
+ - const: cal_top
+ - const: cal_rx_core0
+ - const: cal_rx_core1
+
+ interrupts:
+ maxItems: 1
+
+ ti,camerrx-control:
+ $ref: "/schemas/types.yaml#/definitions/phandle-array"
+ description:
+ phandle to the device control module and offset to the
+ control_camerarx_core register
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ const: fck
+
+ power-domains:
+ description:
+ List of phandle and PM domain specifier as documented in
+ Documentation/devicetree/bindings/power/power_domain.txt
+ maxItems: 1
+
+ # See ./video-interfaces.txt for details
+ ports:
+ type: object
+ additionalProperties: false
+
+ properties:
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+ port@0:
+ type: object
+ additionalProperties: false
+
+ properties:
+ reg:
+ const: 0
+ description: CSI2 Port #0
+
+ patternProperties:
+ endpoint:
+ type: object
+ additionalProperties: false
+
+ properties:
+ clock-lanes:
+ maxItems: 1
+
+ data-lanes:
+ minItems: 1
+ maxItems: 4
+
+ remote-endpoint: true
+
+ required:
+ - reg
+
+ port@1:
+ type: object
+ additionalProperties: false
+
+ properties:
+ reg:
+ const: 1
+ description: CSI2 Port #1
+
+ patternProperties:
+ endpoint:
+ type: object
+ additionalProperties: false
+
+ properties:
+ clock-lanes:
+ maxItems: 1
+
+ data-lanes:
+ minItems: 1
+ maxItems: 4
+
+ remote-endpoint: true
+
+ required:
+ - reg
+
+ required:
+ - "#address-cells"
+ - "#size-cells"
+ - port@0
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - interrupts
+ - ti,camerrx-control
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ cal: cal@...5b000 {
+ compatible = "ti,dra72-cal";
+ reg = <0x4845B000 0x400>,
+ <0x4845B800 0x40>,
+ <0x4845B900 0x40>;
+ reg-names = "cal_top",
+ "cal_rx_core0",
+ "cal_rx_core1";
+ interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+ ti,camerrx-control = <&scm_conf 0xE94>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ csi2_0: port@0 {
+ reg = <0>;
+ csi2_phy0: endpoint {
+ remote-endpoint = <&csi2_cam0>;
+ clock-lanes = <0>;
+ data-lanes = <1 2>;
+ };
+ };
+ };
+ };
+
+ i2c5: i2c@...7c000 {
+ clock-frequency = <400000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ camera-sensor@3c {
+ compatible = "ovti,ov5640";
+ reg = <0x3c>;
+
+ clocks = <&clk_ov5640_fixed>;
+ clock-names = "xclk";
+
+ port {
+ csi2_cam0: endpoint {
+ remote-endpoint = <&csi2_phy0>;
+ clock-lanes = <0>;
+ data-lanes = <1 2>;
+ };
+ };
+ };
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/media/ti-cal.txt b/Documentation/devicetree/bindings/media/ti-cal.txt
deleted file mode 100644
index 2deb256e7032..000000000000
--- a/Documentation/devicetree/bindings/media/ti-cal.txt
+++ /dev/null
@@ -1,81 +0,0 @@
-Texas Instruments DRA72x CAMERA ADAPTATION LAYER (CAL)
-------------------------------------------------------
-
-The Camera Adaptation Layer (CAL) is a key component for image capture
-applications. The capture module provides the system interface and the
-processing capability to connect CSI2 image-sensor modules to the
-DRA72x device.
-
-Required properties:
-- compatible:
- Should be "ti,dra72-cal", for DRA72 controllers
- Should be "ti,dra72-pre-es2-cal", for DRA72 controllers pre ES2.0
- Should be "ti,dra76-cal", for DRA76 controllers
- Should be "ti,am654-cal", for AM654 controllers
-- reg: CAL Top level, Receiver Core #0, Receiver Core #1 and Camera RX
- control address space
-- reg-names: cal_top, cal_rx_core0, cal_rx_core1 and camerrx_control
- registers
-- interrupts: should contain IRQ line for the CAL;
-- ti,camerrx-control: phandle to the device control module and offset to
- the control_camerarx_core register.
- This node is meant to replace the "camerrx_control"
- reg entry above but "camerrx_control" is still
- handled for backward compatibility.
-
-CAL supports 2 camera port nodes on MIPI bus. Each CSI2 camera port nodes
-should contain a 'port' child node with child 'endpoint' node. Please
-refer to the bindings defined in
-Documentation/devicetree/bindings/media/video-interfaces.txt.
-
-Example:
- cal: cal@...5b000 {
- compatible = "ti,dra72-cal";
- reg = <0x4845B000 0x400>,
- <0x4845B800 0x40>,
- <0x4845B900 0x40>;
- reg-names = "cal_top",
- "cal_rx_core0",
- "cal_rx_core1";
- interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
- ti,camerrx-control = <&scm_conf 0xE94>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- csi2_0: port@0 {
- reg = <0>;
- csi2_phy0: endpoint {
- remote-endpoint = <&csi2_cam0>;
- clock-lanes = <0>;
- data-lanes = <1 2>;
- };
- };
- csi2_1: port@1 {
- reg = <1>;
- };
- };
- };
-
- i2c5: i2c@...7c000 {
- clock-frequency = <400000>;
-
- camera-sensor@3c {
- compatible = "ovti,ov5640";
- reg = <0x3c>;
-
- clocks = <&clk_fixed>;
- clock-names = "xclk";
-
- port {
- csi2_cam0: endpoint {
- remote-endpoint = <&csi2_phy0>;
- clock-lanes = <0>;
- data-lanes = <1 2>;
- };
- };
- };
- };
diff --git a/MAINTAINERS b/MAINTAINERS
index 37a977cbac6f..909961cff0fd 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -16324,6 +16324,7 @@ Q: http://patchwork.linuxtv.org/project/linux-media/list/
S: Maintained
F: drivers/media/platform/ti-vpe/
F: Documentation/devicetree/bindings/media/ti,vpe.yaml
+ Documentation/devicetree/bindings/media/ti,cal.yaml
TI WILINK WIRELESS DRIVERS
L: linux-wireless@...r.kernel.org
--
2.17.1
Powered by blists - more mailing lists