[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20191113203951.3704428-1-bjorn.andersson@linaro.org>
Date: Wed, 13 Nov 2019 12:39:51 -0800
From: Bjorn Andersson <bjorn.andersson@...aro.org>
To: Andy Gross <agross@...nel.org>,
Bjorn Andersson <bjorn.andersson@...aro.org>
Cc: linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: [PATCH] arm64: dts: qcom: db845c: Move remoteproc firmware to sdm845
The redistributable firmware should work on any engineering device, so
lets push this to qcom/sdm845, rather than qcom/db845c. Also specify the
path for the modem firmware.
Signed-off-by: Bjorn Andersson <bjorn.andersson@...aro.org>
---
arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
index d100f46791a6..c4f6c6695bbd 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
@@ -197,7 +197,7 @@
&adsp_pas {
status = "okay";
- firmware-name = "qcom/db845c/adsp.mdt";
+ firmware-name = "qcom/sdm845/adsp.mdt";
};
&apps_rsc {
@@ -343,7 +343,7 @@
&cdsp_pas {
status = "okay";
- firmware-name = "qcom/db845c/cdsp.mdt";
+ firmware-name = "qcom/sdm845/cdsp.mdt";
};
&gcc {
@@ -352,6 +352,11 @@
<GCC_QSPI_CNOC_PERIPH_AHB_CLK>;
};
+&mss_pil {
+ status = "okay";
+ firmware-name = "qcom/sdm845/mba.mbn", "qcom/sdm845/modem.mbn";
+};
+
&pm8998_gpio {
vol_up_pin_a: vol-up-active {
pins = "gpio6";
--
2.23.0
Powered by blists - more mailing lists