linux-kernel - Re: [PATCH v5 4/8] dt-bindings: mmc: Add optional generic properties for mmc

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <CAL_JsqJNFGi+X0XU449DE0SRMYaakAzKOuFqZdAT5pptrOZrbg@mail.gmail.com>
Date:   Mon, 18 Nov 2019 08:44:27 -0600
From:   Rob Herring <robh@...nel.org>
To:     Manish Narani <MNARANI@...inx.com>
Cc:     "ulf.hansson@...aro.org" <ulf.hansson@...aro.org>,
        "mark.rutland@....com" <mark.rutland@....com>,
        "adrian.hunter@...el.com" <adrian.hunter@...el.com>,
        Michal Simek <michals@...inx.com>,
        Jolly Shah <JOLLYS@...inx.com>,
        Nava kishore Manne <navam@...inx.com>,
        Rajan Vaja <RAJANV@...inx.com>,
        "linux-mmc@...r.kernel.org" <linux-mmc@...r.kernel.org>,
        "devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
        "linux-arm-kernel@...ts.infradead.org" 
        <linux-arm-kernel@...ts.infradead.org>, git <git@...inx.com>
Subject: Re: [PATCH v5 4/8] dt-bindings: mmc: Add optional generic properties
 for mmc

On Mon, Nov 11, 2019 at 4:07 AM Manish Narani <MNARANI@...inx.com> wrote:
>
> Hi Rob,
>
>
> > -----Original Message-----
> > From: Rob Herring <robh@...nel.org>
> > Sent: Tuesday, November 5, 2019 4:44 AM
> > To: Manish Narani <MNARANI@...inx.com>
> > Cc: ulf.hansson@...aro.org; mark.rutland@....com;
> > adrian.hunter@...el.com; Michal Simek <michals@...inx.com>; Jolly Shah
> > <JOLLYS@...inx.com>; Nava kishore Manne <navam@...inx.com>; Rajan Vaja
> > <RAJANV@...inx.com>; linux-mmc@...r.kernel.org;
> > devicetree@...r.kernel.org; linux-kernel@...r.kernel.org; linux-arm-
> > kernel@...ts.infradead.org; git <git@...inx.com>
> > Subject: Re: [PATCH v5 4/8] dt-bindings: mmc: Add optional generic
> > properties for mmc
> >
> > On Fri, Nov 01, 2019 at 11:35:49AM +0530, Manish Narani wrote:
> > > Add optional properties for mmc hosts which are used to set clk delays
> > > for different speed modes in the controller.
> > >
> > > Signed-off-by: Manish Narani <manish.narani@...inx.com>
> > > ---
> > >  .../bindings/mmc/mmc-controller.yaml          | 92 +++++++++++++++++++
> > >  1 file changed, 92 insertions(+)
> > >
> > > diff --git a/Documentation/devicetree/bindings/mmc/mmc-controller.yaml
> > b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml
> > > index 080754e0ef35..87a83d966851 100644
> > > --- a/Documentation/devicetree/bindings/mmc/mmc-controller.yaml
> > > +++ b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml
> > > @@ -212,6 +212,98 @@ properties:
> > >      description:
> > >        eMMC HS400 enhanced strobe mode is supported
> > >
> > > +  # Below mentioned are the clock (phase) delays which are to be
> > configured
> > > +  # in the controller while switching to particular speed mode. The range
> > > +  # of values are 0 to 359 degrees.
> > > +
> > > +  clk-phase-legacy:
> > > +    allOf:
> > > +      - $ref: /schemas/types.yaml#/definitions/uint32
> > > +      - minimum: 0
> > > +      - maximum: 359
> > > +    description:
> > > +      Input/Output Clock Delay pair in degrees for Legacy Mode.
> > > +
> > > +  clk-phase-mmc-hs:
> > > +    allOf:
> > > +      - $ref: /schemas/types.yaml#/definitions/uint32
> > > +      - minimum: 0
> > > +      - maximum: 359
> > > +    description:
> > > +      Input/Output Clock Delay pair degrees for MMC HS.
> > > +
> > > +  clk-phase-sd-hs:
> > > +    allOf:
> > > +      - $ref: /schemas/types.yaml#/definitions/uint32
> > > +      - minimum: 0
> > > +      - maximum: 359
> > > +    description:
> > > +      Input/Output Clock Delay pair in degrees for SD HS.
> > > +
> > > +  clk-phase-uhs-sdr12:
> > > +    allOf:
> > > +      - $ref: /schemas/types.yaml#/definitions/uint32
> > > +      - minimum: 0
> > > +      - maximum: 359
> > > +    description:
> > > +      Input/Output Clock Delay pair in degrees for SDR12.
> > > +
> > > +  clk-phase-uhs-sdr25:
> > > +    allOf:
> > > +      - $ref: /schemas/types.yaml#/definitions/uint32
> > > +      - minimum: 0
> > > +      - maximum: 359
> > > +    description:
> > > +      Input/Output Clock Delay pair in degrees for SDR25.
> > > +
> > > +  clk-phase-uhs-sdr50:
> > > +    allOf:
> > > +      - $ref: /schemas/types.yaml#/definitions/uint32
> > > +      - minimum: 0
> > > +      - maximum: 359
> > > +    description:
> > > +      Input/Output Clock Delay pair in degrees for SDR50.
> > > +
> > > +  clk-phase-uhs-sdr104:
> > > +    allOf:
> > > +      - $ref: /schemas/types.yaml#/definitions/uint32
> > > +      - minimum: 0
> > > +      - maximum: 359
> > > +    description:
> > > +      Input/Output Clock Delay pair in degrees for SDR104.
> > > +
> > > +  clk-phase-uhs-ddr50:
> > > +    allOf:
> > > +      - $ref: /schemas/types.yaml#/definitions/uint32
> > > +      - minimum: 0
> > > +      - maximum: 359
> > > +    description:
> > > +      Input/Output Clock Delay pair in degrees for SD DDR50.
> > > +
> > > +  clk-phase-mmc-ddr52:
> > > +    allOf:
> > > +      - $ref: /schemas/types.yaml#/definitions/uint32
> > > +      - minimum: 0
> > > +      - maximum: 359
> > > +    description:
> > > +      Input/Output Clock Delay pair in degrees for MMC DDR52.
> > > +
> > > +  clk-phase-mmc-hs200:
> > > +    allOf:
> > > +      - $ref: /schemas/types.yaml#/definitions/uint32
> > > +      - minimum: 0
> > > +      - maximum: 359
> > > +    description:
> > > +      Input/Output Clock Delay pair in degrees for MMC HS200.
> > > +
> > > +  clk-phase-mmc-hs400:
> > > +    allOf:
> > > +      - $ref: /schemas/types.yaml#/definitions/uint32
> > > +      - minimum: 0
> > > +      - maximum: 359
> > > +    description:
> > > +      Input/Output Clock Delay pair in degrees for MMC HS400.
> >
> > This can be condensed into:
> >
> > patternProperties:
> >
> > "^clk-phase-(legacy|sd-hs|mmc-(hs|hs[24]00|ddr52)|uhs-
> > (sdr(12|25|50|104)|ddr50))$":
> >
> > Or if you want to divide them between SD and MMC ones, that would be
> > fine for me.
>
> Below change should work? Please review.

Running 'make dt_binding_check' would tell you...

> --- a/Documentation/devicetree/bindings/mmc/mmc-controller.yaml
> +++ b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml
> @@ -333,6 +333,16 @@ patternProperties:
>      required:
>        - reg
>
> +  "^clk-phase-(legacy|sd-hs|mmc-(hs|hs[24]00|ddr52)|uhs-(sdr(12|25|50|104)|ddr50))$":
> +    allOf:
> +      - $ref: /schemas/types.yaml#/definitions/uint32
> +      - minimum: 0
> +      - maximum: 359

Drop the '-' on maximum so that minimum/maximum are 1 item in the list.

> +    description:
> +      Set the clock (phase) delays which are to be configured in the
> +      controller while switching to particular speed mode. These values
> +      are in pair of degrees.
> +
>  dependencies:
>    cd-debounce-delay-ms: [ cd-gpios ]
>    fixed-emmc-driver-type: [ non-removable ]
> @@ -351,6 +361,7 @@ examples:
>          keep-power-in-suspend;
>          wakeup-source;
>          mmc-pwrseq = <&sdhci0_pwrseq>;
> +        clk-phase-sd-hs = <63>, <72>;

This should fail because it is defined as a single int.

Rob