[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20191126145450.GB5108@optiplex>
Date: Tue, 26 Nov 2019 15:54:50 +0100
From: Oliver Graute <oliver.graute@...il.com>
To: Peng Fan <peng.fan@....com>
Cc: "catalin.marinas@....com" <catalin.marinas@....com>,
"will@...nel.org" <will@...nel.org>,
Anson Huang <anson.huang@....com>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"mripard@...nel.org" <mripard@...nel.org>,
"bjorn.andersson@...aro.org" <bjorn.andersson@...aro.org>,
"dinguyen@...nel.org" <dinguyen@...nel.org>,
dl-linux-imx <linux-imx@....com>,
"olof@...om.net" <olof@...om.net>,
Leonard Crestez <leonard.crestez@....com>,
"shawnguo@...nel.org" <shawnguo@...nel.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>
Subject: Re: [PATCH] arm64: defconfig: Change CONFIG_AT803X_PHY from m to y
On 04/11/19, Peng Fan wrote:
> From: Peng Fan <peng.fan@....com>
>
> With phy-reset-gpios are enabled for i.MX8MM-EVK board, phy
> will be reset. Without CONFIG_AT803X_PHY as y, board will stop
> booting in NFS DHCP, because phy is not ready. So mark
> CONFIG_AT803X_PHY from m to y to make board boot when using nfs rootfs.
>
> Signed-off-by: Peng Fan <peng.fan@....com>
> ---
> arch/arm64/configs/defconfig | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
> index c9a867ac32d4..cd778c9ea8a4 100644
> --- a/arch/arm64/configs/defconfig
> +++ b/arch/arm64/configs/defconfig
> @@ -285,7 +285,7 @@ CONFIG_SNI_AVE=y
> CONFIG_SNI_NETSEC=y
> CONFIG_STMMAC_ETH=m
> CONFIG_MDIO_BUS_MUX_MMIOREG=y
> -CONFIG_AT803X_PHY=m
> +CONFIG_AT803X_PHY=y
> CONFIG_MARVELL_PHY=m
> CONFIG_MARVELL_10G_PHY=m
> CONFIG_MESON_GXL_PHY=m
> --
> 2.16.4
Hello Peng,
this patch broke my imx8qm nfs setup. With the generic phy driver my
board is booting fine. But with the AT803X_PHY=y enabled I'am running
into the following phy issue. So on my side it looks inverse as on
yours. What is the best proposal to fix this?
[ 5.550442] fec 5b040000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
[ 5.573206] Sending DHCP requests ...... timed out!
[ 95.339702] IP-Config: Retrying forever (NFS root)...
[ 95.348873] Atheros 8035 ethernet 5b040000.ethernet-1:06: attached PHY driver [Atheros 8035 ethernet] (mii_bus:phy_addr=5b040000.ethernet-1:06, irq=POLL)
[ 99.438443] fec 5b040000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
[ 99.461206] Sending DHCP requests ...... timed out!
[ 174.419639] IP-Config: Retrying forever (NFS root)...
[ 174.428834] Atheros 8035 ethernet 5b040000.ethernet-1:06: attached PHY driver [Atheros 8035 ethernet] (mii_bus:phy_addr=5b040000.ethernet-1:06, irq=POLL)
[ 178.542418] fec 5b040000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
[ 178.565206] Sending DHCP requests .....
[ 209.261271] random: crng init done
[ 230.565202] . timed out!
[ 260.577340] IP-Config: Retrying forever (NFS root)...
[ 260.586497] Atheros 8035 ethernet 5b040000.ethernet-1:06: attached PHY driver [Atheros 8035 ethernet] (mii_bus:phy_addr=5b040000.ethernet-1:06, irq=POLL)
[ 264.686438] fec 5b040000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
[ 264.709206] Sending DHCP requests ...... timed out!
[ 339.259701] IP-Config: Retrying forever (NFS root)...
[ 339.268835] Atheros 8035 ethernet 5b040000.ethernet-1:06: attached PHY driver [Atheros 8035 ethernet] (mii_bus:phy_addr=5b040000.ethernet-1:06, irq=POLL)
[ 343.374422] fec 5b040000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
[ 343.405206] Sending DHCP requests ...... timed out!
[ 433.171676] IP-Config: Retrying forever (NFS root)...
[ 433.180842] Atheros 8035 ethernet 5b040000.ethernet-1:06: attached PHY driver [Atheros 8035 ethernet] (mii_bus:phy_addr=5b040000.ethernet-1:06, irq=POLL)
[ 437.294439] fec 5b040000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
[ 437.317206] Sending DHCP requests ...... timed out!
[ 509.003660] IP-Config: Retrying forever (NFS root)...
[ 509.012836] Atheros 8035 ethernet 5b040000.ethernet-1:06: attached PHY driver [Atheros 8035 ethernet] (mii_bus:phy_addr=5b040000.ethernet-1:06, irq=POLL)
[ 513.102416] fec 5b040000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
Best Regards,
Oliver
Powered by blists - more mailing lists