[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <e39c043d-d098-283d-97b0-2a44aefec2f1@free.fr>
Date: Wed, 27 Nov 2019 09:47:37 +0100
From: Marc Gonzalez <marc.w.gonzalez@...e.fr>
To: Oliver Graute <oliver.graute@...il.com>
Cc: Peng Fan <peng.fan@....com>, Anson Huang <anson.huang@....com>,
dl-linux-imx <linux-imx@....com>,
Linux ARM <linux-arm-kernel@...ts.infradead.org>,
LKML <linux-kernel@...r.kernel.org>,
Florian Fainelli <f.fainelli@...il.com>,
Andrew Lunn <andrew@...n.ch>,
Russell King <rmk+kernel@...linux.org.uk>,
André Draszik <git@...red.net>,
Heiner Kallweit <hkallweit1@...il.com>
Subject: Re: [PATCH] arm64: defconfig: Change CONFIG_AT803X_PHY from m to y
On 26/11/2019 15:54, Oliver Graute wrote:
> this patch broke my imx8qm nfs setup. With the generic phy driver my
> board is booting fine. But with the AT803X_PHY=y enabled I'm running
> into the following phy issue. So on my side it looks inverse as on
> yours. What is the best proposal to fix this?
>
> [ 5.550442] fec 5b040000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
> [ 5.573206] Sending DHCP requests ...... timed out!
> [ 95.339702] IP-Config: Retrying forever (NFS root)...
> [ 95.348873] Atheros 8035 ethernet 5b040000.ethernet-1:06: attached PHY driver [Atheros 8035 ethernet] (mii_bus:phy_addr=5b040000.ethernet-1:06, irq=POLL)
> [ 99.438443] fec 5b040000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
> [ 99.461206] Sending DHCP requests ...... timed out!
Which DTS are you using?
I bet one dollar that 6d4cd041f0af triggered a latent bug in the DTS.
Regards.
Powered by blists - more mailing lists