| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1574953375.6465.8.camel@mtkswgap22>
Date: Thu, 28 Nov 2019 23:02:55 +0800
From: Neal Liu <neal.liu@...iatek.com>
To: Ard Biesheuvel <ard.biesheuvel@...aro.org>
CC: Neal Liu <neal.liu@...iatek.com>,
Mark Rutland <mark.rutland@....com>,
Devicetree List <devicetree@...r.kernel.org>,
Herbert Xu <herbert@...dor.apana.org.au>,
wsd_upstream <wsd_upstream@...iatek.com>,
Sean Wang <sean.wang@...nel.org>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
Rob Herring <robh+dt@...nel.org>,
"Crystal Guo (郭晶)"
<Crystal.Guo@...iatek.com>,
"open list:HARDWARE RANDOM NUMBER GENERATOR CORE"
<linux-crypto@...r.kernel.org>, Matt Mackall <mpm@...enic.com>,
Matthias Brugger <matthias.bgg@...il.com>,
"moderated list:ARM/Mediatek SoC support"
<linux-mediatek@...ts.infradead.org>,
linux-arm-kernel <linux-arm-kernel@...ts.infradead.org>
Subject: Re: [PATCH v5 3/3] hwrng: add mtk-sec-rng driver
On Wed, 2019-11-27 at 23:03 +0800, Ard Biesheuvel wrote:
> On Wed, 27 Nov 2019 at 15:23, Neal Liu <neal.liu@...iatek.com> wrote:
> >
> > For MediaTek SoCs on ARMv8 with TrustZone enabled, peripherals like
> > entropy sources is not accessible from normal world (linux) and
> > rather accessible from secure world (ATF/TEE) only. This driver aims
> > to provide a generic interface to ATF rng service.
> >
> > Signed-off-by: Neal Liu <neal.liu@...iatek.com>
> > ---
> > drivers/char/hw_random/Kconfig | 16 ++++++
> > drivers/char/hw_random/Makefile | 1 +
> > drivers/char/hw_random/mtk-sec-rng.c | 103 ++++++++++++++++++++++++++++++++++
> > 3 files changed, 120 insertions(+)
> > create mode 100644 drivers/char/hw_random/mtk-sec-rng.c
> >
> > diff --git a/drivers/char/hw_random/Kconfig b/drivers/char/hw_random/Kconfig
> > index 25a7d8f..f08c852 100644
> > --- a/drivers/char/hw_random/Kconfig
> > +++ b/drivers/char/hw_random/Kconfig
> > @@ -398,6 +398,22 @@ config HW_RANDOM_MTK
> >
> > If unsure, say Y.
> >
> > +config HW_RANDOM_MTK_SEC
> > + tristate "MediaTek Security Random Number Generator support"
> > + depends on HW_RANDOM
> > + depends on ARCH_MEDIATEK || COMPILE_TEST
> > + default HW_RANDOM
> > + help
> > + This driver provides kernel-side support for the Random Number
> > + Generator hardware found on MediaTek SoCs. The difference with
> > + mtk-rng is the Random Number Generator hardware is secure
> > + access only.
> > +
> > + To compile this driver as a module, choose M here. the
> > + module will be called mtk-sec-rng.
> > +
> > + If unsure, say Y.
> > +
> > config HW_RANDOM_S390
> > tristate "S390 True Random Number Generator support"
> > depends on S390
> > diff --git a/drivers/char/hw_random/Makefile b/drivers/char/hw_random/Makefile
> > index 7c9ef4a..bee5412 100644
> > --- a/drivers/char/hw_random/Makefile
> > +++ b/drivers/char/hw_random/Makefile
> > @@ -36,6 +36,7 @@ obj-$(CONFIG_HW_RANDOM_PIC32) += pic32-rng.o
> > obj-$(CONFIG_HW_RANDOM_MESON) += meson-rng.o
> > obj-$(CONFIG_HW_RANDOM_CAVIUM) += cavium-rng.o cavium-rng-vf.o
> > obj-$(CONFIG_HW_RANDOM_MTK) += mtk-rng.o
> > +obj-$(CONFIG_HW_RANDOM_MTK_SEC) += mtk-sec-rng.o
> > obj-$(CONFIG_HW_RANDOM_S390) += s390-trng.o
> > obj-$(CONFIG_HW_RANDOM_KEYSTONE) += ks-sa-rng.o
> > obj-$(CONFIG_HW_RANDOM_OPTEE) += optee-rng.o
> > diff --git a/drivers/char/hw_random/mtk-sec-rng.c b/drivers/char/hw_random/mtk-sec-rng.c
> > new file mode 100644
> > index 0000000..69ddeca
> > --- /dev/null
> > +++ b/drivers/char/hw_random/mtk-sec-rng.c
> > @@ -0,0 +1,103 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * Copyright (C) 2019 MediaTek Inc.
> > + */
> > +
> > +#include <linux/arm-smccc.h>
> > +#include <linux/hw_random.h>
> > +#include <linux/module.h>
> > +#include <linux/of.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/soc/mediatek/mtk_sip_svc.h>
> > +
> > +#define MTK_SEC_RNG_MAGIC 0x74726e67
> > +#define SMC_RET_NUM 4
> > +#define MTK_SEC_RND_SIZE (sizeof(u32) * SMC_RET_NUM)
> > +
> > +static void mtk_sec_get_rnd(uint32_t *val)
> > +{
> > + struct arm_smccc_res res;
> > +
> > + arm_smccc_smc(MTK_SIP_KERNEL_GET_RND,
> > + MTK_SEC_RNG_MAGIC, 0, 0, 0, 0, 0, 0, &res);
> > +
>
> Can this call never fail? How does the firmware signal that something
> is wrong with the underlying hardware?
>
The smc call is supported in both ARMv7 & ARMv8 architectures.But yes,
it should check hardware status before assigning it.
We would like to check that if hardware is something wrong, all return
value will be zero. ex:
if (!res.a0 && !res.a1 && !res.a2 && !res.a3)
return false;
> > + val[0] = res.a0;
> > + val[1] = res.a1;
> > + val[2] = res.a2;
> > + val[3] = res.a3;
return true;
> > +}
> > +
> > +static int mtk_sec_rng_read(struct hwrng *rng, void *buf, size_t max, bool wait)
> > +{
> > + u32 val[4] = {0};
> > + int retval = 0;
> > + int i;
> > +
> > + while (max >= MTK_SEC_RND_SIZE) {
> > + mtk_sec_get_rnd(val);
> > +
> > + for (i = 0; i < SMC_RET_NUM; i++) {
> > + *(u32 *)buf = val[i];
> > + buf += sizeof(u32);
> > + }
> > +
> > + retval += MTK_SEC_RND_SIZE;
> > + max -= MTK_SEC_RND_SIZE;
> > + }
> > +
> > + return retval;
> > +}
> > +
> > +static struct hwrng mtk_sec_rng = {
> > + .name = "mtk_sec_rng",
> > + .read = mtk_sec_rng_read,
> > + .quality = 900,
> > +};
> > +
> > +static int mtk_sec_rng_probe(void)
> > +{
> > + int ret;
> > +
> > + ret = hwrng_register(&mtk_sec_rng);
> > + if (ret) {
> > + pr_err("Failed to register rng device: %d\n", ret);
> > + return ret;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static int __init mtk_sec_rng_driver_init(void)
> > +{
> > + struct device_node *fw_np;
> > + struct device_node *np;
> > + const char *method;
> > +
> > + fw_np = of_find_node_by_name(NULL, "firmware");
> > + if (!fw_np)
> > + return -ENODEV;
> > +
> > + np = of_find_compatible_node(fw_np, NULL, "mediatek,mtk-sec-rng");
> > + if (!np)
> > + return -ENODEV;
> > +
> > + if (of_property_read_string(np, "method", &method))
> > + return -ENXIO;
> > +
> > + if (strncmp("smc", method, strlen("smc")))
> > + return -EINVAL;
> > +
> > + return mtk_sec_rng_probe();
> > +}
> > +
> > +static void __exit mtk_sec_rng_driver_exit(void)
> > +{
> > + hwrng_unregister(&mtk_sec_rng);
> > +}
> > +
> > +module_init(mtk_sec_rng_driver_init);
> > +module_exit(mtk_sec_rng_driver_exit);
> > +
> > +MODULE_DESCRIPTION("MediaTek Security Random Number Generator Driver");
> > +MODULE_AUTHOR("Neal Liu <neal.liu@...iatek.com>");
> > +MODULE_LICENSE("GPL");
> > --
> > 1.7.9.5
>
> _______________________________________________
> Linux-mediatek mailing list
> Linux-mediatek@...ts.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-mediatek
Powered by blists - more mailing lists