lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20191202122050.GA18399@e119886-lin.cambridge.arm.com>
Date:   Mon, 2 Dec 2019 12:20:50 +0000
From:   Andrew Murray <andrew.murray@....com>
To:     Nicolas Saenz Julienne <nsaenzjulienne@...e.de>
Cc:     maz@...nel.org, linux-kernel@...r.kernel.org,
        Lorenzo Pieralisi <lorenzo.pieralisi@....com>,
        Eric Anholt <eric@...olt.net>,
        Stefan Wahren <wahrenst@....net>,
        Florian Fainelli <f.fainelli@...il.com>,
        bcm-kernel-feedback-list@...adcom.com, james.quinlan@...adcom.com,
        mbrugger@...e.com, phil@...pberrypi.org, jeremy.linton@....com,
        linux-pci@...r.kernel.org, linux-rpi-kernel@...ts.infradead.org,
        Bjorn Helgaas <bhelgaas@...gle.com>,
        linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH v3 5/7] PCI: brcmstb: add MSI capability

On Mon, Dec 02, 2019 at 10:59:36AM +0100, Nicolas Saenz Julienne wrote:
> Hi Andrew,
> 
> On Fri, 2019-11-29 at 15:46 +0000, Andrew Murray wrote:
> > On Tue, Nov 26, 2019 at 10:19:43AM +0100, Nicolas Saenz Julienne wrote:
> > > From: Jim Quinlan <james.quinlan@...adcom.com>
> > > 
> > > This adds MSI support to the Broadcom STB PCIe host controller. The MSI
> > > controller is physically located within the PCIe block, however, there
> > > is no reason why the MSI controller could not be moved elsewhere in the
> > > future. MSIX is not supported by the HW.
> > > 
> > > Since the internal Brcmstb MSI controller is intertwined with the PCIe
> > > controller, it is not its own platform device but rather part of the
> > > PCIe platform device.
> > > 
> > > Signed-off-by: Jim Quinlan <james.quinlan@...adcom.com>
> > > Co-developed-by: Nicolas Saenz Julienne <nsaenzjulienne@...e.de>
> > > Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@...e.de>
> > > Reviewed-by: Marc Zyngier <maz@...nel.org>
> > > 
> > > ---
> > > 
> > > Changes since v2 (kept Marc's Reviewed-by as changes didn't affect irq
> > > subsystem stuff or seem petty enough):
> > >   - Use standard APIs on register operations
> > >   - Get rid of revision code
> > 
> > Do any RPI4's have a HW revision of less than 33?
> 
> No, IIRC it's actually revision 34. I had left that bit of code in, following
> the same train of thought as with the of_data on the device-tree part of the
> driver: "It's harmless and should make accomodating other devices easier." It
> turned out not to be such a great approach. Lesson's learned. So I decided to
> remove it.

OK you can add my:

Reviewed-by: Andrew Murray <andrew.murray@....com>

Thanks,

Andrew Murray

> 
> > >   - Update rules to msi_target_addr selection
> > >   - Remove unwarranted MSI_FLAG_PCI_MSIX
> > >   - Small cosmetic changes
> > > 
> > > Changes since v1:cuando tenĂ­as tu vacaciones?
> > >   - Move revision code and some registers to this patch
> > >   - Use PCIE_MSI_IRQ_DOMAIN in Kconfig
> > >   - Remove redundant register read from ISR
> > >   - Fail probe on MSI init error
> > >   - Get rid of msi_internal
> > >   - Use bitmap family of functions
> > >   - Use edge triggered setup
> > >   - Add comment regarding MultiMSI
> > >   - Simplify compose_msi_msg to avoid reg read
> > > 
> > > This is based on Jim's original submission[1] with some slight changes
> > > regarding how pcie->msi_target_addr is decided.
> > > 
> > > [1] https://patchwork.kernel.org/patch/10605955/
> > > 
> > >  drivers/pci/controller/Kconfig        |   1 +
> > >  drivers/pci/controller/pcie-brcmstb.c | 261 +++++++++++++++++++++++++-
> > >  2 files changed, 261 insertions(+), 1 deletion(-)
> > > 
> > > diff --git a/drivers/pci/controller/Kconfig b/drivers/pci/controller/Kconfig
> > > index 27504f108ee5..918e283bbff1 100644
> > > +
> > > +static void brcm_msi_compose_msi_msg(struct irq_data *data, struct msi_msg
> > > *msg)
> > > +{
> > > +	struct brcm_msi *msi = irq_data_get_irq_chip_data(data);
> > > +
> > > +	msg->address_lo = lower_32_bits(msi->target_addr);
> > > +	msg->address_hi = upper_32_bits(msi->target_addr);
> > > +	msg->data = 0x6540 | data->hwirq;
> > 
> > NIT: Perhaps this 0x6540 can be a define - just in the same way we have a
> > define
> > for PCIE_MISC_MSI_DATA_CONFIG_VAL.
> 
> Noted
> 
> Regards,
> Nicolas
> 


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ