linux-kernel - [PATCH] tty: serial: amba-pl011: remove set but unused variable

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [day] [month] [year] [list]

Message-ID: <1575619526-34482-1-git-send-email-wangxiongfeng2@huawei.com>
Date:   Fri, 6 Dec 2019 16:05:26 +0800
From:   Xiongfeng Wang <wangxiongfeng2@...wei.com>
To:     <linux@...linux.org.uk>, <gregkh@...uxfoundation.org>,
        <jslaby@...e.com>
CC:     <linux-serial@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
        <wangxiongfeng2@...wei.com>
Subject: [PATCH] tty: serial: amba-pl011: remove set but unused variable

Fix the following warning:
drivers/tty/serial/amba-pl011.c: In function check_apply_cts_event_workaround:
drivers/tty/serial/amba-pl011.c:1461:15: warning: variable dummy_read set but not used [-Wunused-but-set-variable]

The data read is useless and can be dropped.

Reported-by: Hulk Robot <hulkci@...wei.com>
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@...wei.com>
---
 drivers/tty/serial/amba-pl011.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index 4b28134..c5e9475 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -1452,8 +1452,6 @@ static void pl011_modem_status(struct uart_amba_port *uap)
 
 static void check_apply_cts_event_workaround(struct uart_amba_port *uap)
 {
-	unsigned int dummy_read;
-
 	if (!uap->vendor->cts_event_workaround)
 		return;
 
@@ -1465,8 +1463,8 @@ static void check_apply_cts_event_workaround(struct uart_amba_port *uap)
 	 * single apb access will incur 2 pclk(133.12Mhz) delay,
 	 * so add 2 dummy reads
 	 */
-	dummy_read = pl011_read(uap, REG_ICR);
-	dummy_read = pl011_read(uap, REG_ICR);
+	pl011_read(uap, REG_ICR);
+	pl011_read(uap, REG_ICR);
 }
 
 static irqreturn_t pl011_int(int irq, void *dev_id)
-- 
1.7.12.4