[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20191209205010.4115-1-natechancellor@gmail.com>
Date: Mon, 9 Dec 2019 13:50:10 -0700
From: Nathan Chancellor <natechancellor@...il.com>
To: Kyungmin Park <kyungmin.park@...sung.com>,
Miquel Raynal <miquel.raynal@...tlin.com>
Cc: Vignesh Raghavendra <vigneshr@...com>,
Richard Weinberger <richard@....at>,
linux-mtd@...ts.infradead.org, linux-kernel@...r.kernel.org,
clang-built-linux@...glegroups.com,
Nathan Chancellor <natechancellor@...il.com>
Subject: [PATCH] mtd: onenand_base: Adjust indentation in onenand_read_ops_nolock
Clang warns:
../drivers/mtd/nand/onenand/onenand_base.c:1269:3: warning: misleading
indentation; statement is not part of the previous 'if'
[-Wmisleading-indentation]
while (!ret) {
^
../drivers/mtd/nand/onenand/onenand_base.c:1266:2: note: previous
statement is here
if (column + thislen > writesize)
^
1 warning generated.
This warning occurs because there is a space before the tab of the while
loop. There are spaces at the beginning of a lot of the lines in this
block, remove them so that the indentation is consistent with the Linux
kernel coding style and clang no longer warns.
Fixes: a8de85d55700 ("[MTD] OneNAND: Implement read-while-load")
Link: https://github.com/ClangBuiltLinux/linux/issues/794
Signed-off-by: Nathan Chancellor <natechancellor@...il.com>
---
drivers/mtd/nand/onenand/onenand_base.c | 64 ++++++++++++-------------
1 file changed, 32 insertions(+), 32 deletions(-)
diff --git a/drivers/mtd/nand/onenand/onenand_base.c b/drivers/mtd/nand/onenand/onenand_base.c
index 77bd32a683e1..c84ac749d70e 100644
--- a/drivers/mtd/nand/onenand/onenand_base.c
+++ b/drivers/mtd/nand/onenand/onenand_base.c
@@ -1266,26 +1266,26 @@ static int onenand_read_ops_nolock(struct mtd_info *mtd, loff_t from,
if (column + thislen > writesize)
thislen = writesize - column;
- while (!ret) {
- /* If there is more to load then start next load */
- from += thislen;
- if (read + thislen < len) {
+ while (!ret) {
+ /* If there is more to load then start next load */
+ from += thislen;
+ if (read + thislen < len) {
this->command(mtd, ONENAND_CMD_READ, from, writesize);
- /*
- * Chip boundary handling in DDP
- * Now we issued chip 1 read and pointed chip 1
+ /*
+ * Chip boundary handling in DDP
+ * Now we issued chip 1 read and pointed chip 1
* bufferram so we have to point chip 0 bufferram.
- */
- if (ONENAND_IS_DDP(this) &&
- unlikely(from == (this->chipsize >> 1))) {
- this->write_word(ONENAND_DDP_CHIP0, this->base + ONENAND_REG_START_ADDRESS2);
- boundary = 1;
- } else
- boundary = 0;
- ONENAND_SET_PREV_BUFFERRAM(this);
- }
- /* While load is going, read from last bufferRAM */
- this->read_bufferram(mtd, ONENAND_DATARAM, buf, column, thislen);
+ */
+ if (ONENAND_IS_DDP(this) &&
+ unlikely(from == (this->chipsize >> 1))) {
+ this->write_word(ONENAND_DDP_CHIP0, this->base + ONENAND_REG_START_ADDRESS2);
+ boundary = 1;
+ } else
+ boundary = 0;
+ ONENAND_SET_PREV_BUFFERRAM(this);
+ }
+ /* While load is going, read from last bufferRAM */
+ this->read_bufferram(mtd, ONENAND_DATARAM, buf, column, thislen);
/* Read oob area if needed */
if (oobbuf) {
@@ -1302,23 +1302,23 @@ static int onenand_read_ops_nolock(struct mtd_info *mtd, loff_t from,
}
/* See if we are done */
- read += thislen;
- if (read == len)
- break;
- /* Set up for next read from bufferRAM */
- if (unlikely(boundary))
- this->write_word(ONENAND_DDP_CHIP1, this->base + ONENAND_REG_START_ADDRESS2);
- ONENAND_SET_NEXT_BUFFERRAM(this);
- buf += thislen;
+ read += thislen;
+ if (read == len)
+ break;
+ /* Set up for next read from bufferRAM */
+ if (unlikely(boundary))
+ this->write_word(ONENAND_DDP_CHIP1, this->base + ONENAND_REG_START_ADDRESS2);
+ ONENAND_SET_NEXT_BUFFERRAM(this);
+ buf += thislen;
thislen = min_t(int, writesize, len - read);
- column = 0;
- cond_resched();
- /* Now wait for load */
- ret = this->wait(mtd, FL_READING);
- onenand_update_bufferram(mtd, from, !ret);
+ column = 0;
+ cond_resched();
+ /* Now wait for load */
+ ret = this->wait(mtd, FL_READING);
+ onenand_update_bufferram(mtd, from, !ret);
if (mtd_is_eccerr(ret))
ret = 0;
- }
+ }
/*
* Return success, if no ECC failures, else -EBADMSG
--
2.24.0
Powered by blists - more mailing lists