| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20191211075021.GW3468@dell>
Date: Wed, 11 Dec 2019 07:50:21 +0000
From: Lee Jones <lee.jones@...aro.org>
To: Andreas Kemnade <andreas@...nade.info>
Cc: robh+dt@...nel.org, mark.rutland@....com, a.zummo@...ertech.it,
alexandre.belloni@...tlin.com, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-rtc@...r.kernel.org,
stefan@...er.ch, b.galvani@...il.com, phh@....me,
letux-kernel@...nphoenux.org
Subject: Re: [PATCH v3 3/6] mfd: rn5t618: add irq support
On Tue, 10 Dec 2019, Andreas Kemnade wrote:
> On Tue, 10 Dec 2019 09:32:25 +0000
> Lee Jones <lee.jones@...aro.org> wrote:
>
> > On Fri, 29 Nov 2019, Andreas Kemnade wrote:
> >
> > > This adds support for irq handling in the rc5t619 which is required
> >
> > Please capitalise abbreviations and device names (as they do in the
> > datasheet).
> >
> for IRQ vs. irq: I see both things in commit messages. Is there any rule about
> that?
No, it's preference. Mine is to follow the conventions set out by
standard English grammar. Capital letters to start sentences, proper
nouns and abbreviations, etc.
> > > for properly implementing subdevices like rtc.
> >
> > "RTC"
> >
> > > For now only definitions for the variant rc5t619 are included.
> > >
> > > Signed-off-by: Andreas Kemnade <andreas@...nade.info>
> > > ---
> > > Changes in v3:
> > > alignment cleanup
> > >
> > > Changes in v2:
> > > - no dead code, did some more testing and thinking for that
> > > - remove extra empty lines
> > >
> > > drivers/mfd/Kconfig | 1 +
> > > drivers/mfd/Makefile | 2 +-
> > > drivers/mfd/rn5t618-core.c | 34 ++++++++++++++-
> > > drivers/mfd/rn5t618-irq.c | 85 +++++++++++++++++++++++++++++++++++++
> > > include/linux/mfd/rn5t618.h | 16 +++++++
> > > 5 files changed, 136 insertions(+), 2 deletions(-)
> > > create mode 100644 drivers/mfd/rn5t618-irq.c
> > >
> > > diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> > > index ae24d3ea68ea..522e068d0082 100644
> > > --- a/drivers/mfd/Kconfig
> > > +++ b/drivers/mfd/Kconfig
> > > @@ -1057,6 +1057,7 @@ config MFD_RN5T618
> > > depends on OF
> > > select MFD_CORE
> > > select REGMAP_I2C
> > > + select REGMAP_IRQ
> > > help
> > > Say yes here to add support for the Ricoh RN5T567,
> > > RN5T618, RC5T619 PMIC.
> > > diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> > > index 110ea700231b..2906d5db67d0 100644
> > > --- a/drivers/mfd/Makefile
> > > +++ b/drivers/mfd/Makefile
> > > @@ -217,7 +217,7 @@ obj-$(CONFIG_MFD_VIPERBOARD) += viperboard.o
> > > obj-$(CONFIG_MFD_RC5T583) += rc5t583.o rc5t583-irq.o
> > > obj-$(CONFIG_MFD_RK808) += rk808.o
> > >
> > > -rn5t618-objs := rn5t618-core.o
> > > +rn5t618-objs := rn5t618-core.o rn5t618-irq.o
> > > obj-$(CONFIG_MFD_RN5T618) += rn5t618.o
> > > obj-$(CONFIG_MFD_SEC_CORE) += sec-core.o sec-irq.o
> > > obj-$(CONFIG_MFD_SYSCON) += syscon.o
> > > diff --git a/drivers/mfd/rn5t618-core.c b/drivers/mfd/rn5t618-core.c
> > > index da5cd9c92a59..1e2326217681 100644
> > > --- a/drivers/mfd/rn5t618-core.c
> > > +++ b/drivers/mfd/rn5t618-core.c
> > > @@ -8,6 +8,7 @@
> > >
> > > #include <linux/delay.h>
> > > #include <linux/i2c.h>
> > > +#include <linux/interrupt.h>
> > > #include <linux/mfd/core.h>
> > > #include <linux/mfd/rn5t618.h>
> > > #include <linux/module.h>
> > > @@ -105,7 +106,8 @@ static int rn5t618_i2c_probe(struct i2c_client *i2c,
> > >
> > > i2c_set_clientdata(i2c, priv);
> > > priv->variant = (long)of_id->data;
> > > -
> > > + priv->chip_irq = i2c->irq;
> > > + priv->dev = &i2c->dev;
> >
> > '\n'
> >
> > > priv->regmap = devm_regmap_init_i2c(i2c, &rn5t618_regmap_config);
> > > if (IS_ERR(priv->regmap)) {
> > > ret = PTR_ERR(priv->regmap);
> > > @@ -137,6 +139,11 @@ static int rn5t618_i2c_probe(struct i2c_client *i2c,
> > > return ret;
> > > }
> > >
> > > + if (priv->chip_irq > 0) {
> > > + if (rn5t618_irq_init(priv))
> > > + priv->chip_irq = 0;
> > > + }
> > > +
> > > return 0;
> > > }
> > >
> > > @@ -154,15 +161,40 @@ static int rn5t618_i2c_remove(struct i2c_client *i2c)
> > > return 0;
> > > }
> > >
> > > +static int __maybe_unused rn5t618_i2c_suspend(struct device *dev)
> > > +{
> > > + struct rn5t618 *priv = dev_get_drvdata(dev);
> > > +
> > > + if (priv->chip_irq)
> > > + disable_irq(priv->chip_irq);
> > > +
> > > + return 0;
> > > +}
> > > +
> > > +static int __maybe_unused rn5t618_i2c_resume(struct device *dev)
> > > +{
> > > + struct rn5t618 *priv = dev_get_drvdata(dev);
> > > +
> > > + if (priv->chip_irq)
> > > + enable_irq(priv->chip_irq);
> > > +
> > > + return 0;
> > > +}
> > > +
> > > static const struct i2c_device_id rn5t618_i2c_id[] = {
> > > { }
> > > };
> > > MODULE_DEVICE_TABLE(i2c, rn5t618_i2c_id);
> >
> > Not this patch I know, but it's strange to see this empty.
>
> Yes, should be cleaned up. For now the device tree stuff seems to kick in.
I think this can be removed completely.
Just make sure you use .probe2 and it should be automatic.
[...]
> > > + switch (rn5t618->variant) {
> > > + case RC5T619:
> > > + irq_chip = &rc5t619_irq_chip;
> > > + break;
> > > +
> > > + /* TODO: check irq definitions for other variants */
> >
> > No need for this. It's implied.
> >
> > OOI, when support for more variants be added?
> >
> I have done research about the RN5T618. It has just the RTC IRQ missing, I could just
> add the table for it to prepare the path for others. I cannot test it but
> since there are no users yet, it does not harm that it is not well-tested.
If there are no users and it can't be tested, it should be left out.
We don't want potentially broken, untested code with no users in the
kernel.
--
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
Powered by blists - more mailing lists