linux-kernel - Re: [PATCH v3 2/4] ARM: dts: imx: Add GW5910 board support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Mon, 23 Dec 2019 19:07:01 -0300
From:   Fabio Estevam <festevam@...il.com>
To:     Robert Jones <rjones@...eworks.com>
Cc:     Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        Shawn Guo <shawnguo@...nel.org>,
        Sascha Hauer <s.hauer@...gutronix.de>,
        Pengutronix Kernel Team <kernel@...gutronix.de>,
        NXP Linux Team <linux-imx@....com>,
        "open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" 
        <devicetree@...r.kernel.org>,
        linux-kernel <linux-kernel@...r.kernel.org>,
        "moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE" 
        <linux-arm-kernel@...ts.infradead.org>,
        Tim Harvey <tharvey@...eworks.com>
Subject: Re: [PATCH v3 2/4] ARM: dts: imx: Add GW5910 board support

On Mon, Dec 23, 2019 at 6:44 PM Robert Jones <rjones@...eworks.com> wrote:
>
> From: Tim Harvey <tharvey@...eworks.com>
>
> The Gateworks GW5910 is an IMX6 SoC based single board computer with:
>  - IMX6Q or IMX6DL
>  - 32bit DDR3 DRAM
>  - FEC GbE RJ45 front-panel
>  - 1x miniPCIe socket with PCI Gen2, USB2
>  - 1x miniPCIe socket with PCI Gen2, USB2, nanoSIM
>  - 5V to 60V DC input barrel jack
>  - 3axis accelerometer (lis2de12)
>  - GPS (ublox ZOE-M8Q)
>  - bi-color front-panel LED
>  - 256MB NAND boot device
>  - microSD socket (with UHS-I support)
>  - user pushbutton
>  - Gateworks System Controller (hwmon, pushbutton controller, EEPROM)
>  - Dual-Band Wireless MCU (CC1352, UART/I2S interrconnect to IMX6)
>  - WiFi/Bluetooth/BLE module (Sterling-LSW, SDIO/UART interconnect to IMX6)
>  - RS232 transceiver (1x UART with flow-control or 2x UART (build option)
>  - off-board SPI connector (1x chip-select)
>
> Signed-off-by: Tim Harvey <tharvey@...eworks.com>

Ok, this one has Tim as the author, but since you are submitting it,
you should also add your Signed-off-by below Tim's.