| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <ef20a8b8fb0b136e4b9a233aea562d8b589cc028.1577271823.git.agx@sigxcpu.org>
Date: Wed, 25 Dec 2019 12:07:16 +0100
From: Guido Günther <agx@...xcpu.org>
To: Jacek Anaszewski <jacek.anaszewski@...il.com>,
Pavel Machek <pavel@....cz>, Dan Murphy <dmurphy@...com>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
linux-leds@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: [PATCH v2 3/6] dt: bindings: lm3692x: Add ti,brightness-mapping-exponential property
This allows to select exponential brightness mode instead of the default
linear mode.
Signed-off-by: Guido Günther <agx@...xcpu.org>
---
Documentation/devicetree/bindings/leds/leds-lm3692x.txt | 3 +++
1 file changed, 3 insertions(+)
diff --git a/Documentation/devicetree/bindings/leds/leds-lm3692x.txt b/Documentation/devicetree/bindings/leds/leds-lm3692x.txt
index 95f6d8c19f20..73f41249ecd3 100644
--- a/Documentation/devicetree/bindings/leds/leds-lm3692x.txt
+++ b/Documentation/devicetree/bindings/leds/leds-lm3692x.txt
@@ -18,6 +18,8 @@ Required properties:
Optional properties:
- enable-gpios : gpio pin to enable/disable the device.
- vled-supply : LED supply
+ - ti,brightness-mapping-exponential: Whether to use exponential
+ brightness mapping
- ti,ovp-microvolt: Overvoltage protection in
micro-volt, can be 17000000, 21000000, 25000000 or
29000000. If ti,ovp-microvolt is not specified it
@@ -49,6 +51,7 @@ led-controller@36 {
enable-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
vled-supply = <&vbatt>;
ti,ovp-microvolt = <25000000>;
+ ti,brightness-mapping-exponential;
led@0 {
reg = <0>;
--
2.23.0
Powered by blists - more mailing lists